Daim Ntawv Qhia Tus Neeg Siv

15
14
USER AND INSTALLATION MANUALPANDORA MINI MOTO
IMMOBILISER RADIO TAG
A radio tag is a device used to control a vehicle/system on a distance of a Bluetooth connection. The
tag is also used as an authorization device for «Immobiliser/Anti-Hi-Jack/Hands Free» modes. The
radio tag has: a control button
for arming/disarming and activating/deactivating Service mode;
a built-in accelerometer, which allows the tag to go in the energy saving mode when there is no
movement; LED indicator
SEND.
!
fOr cOrrEcT OpEraTiON, iT is NOT rEcOmmENdEd
TO placE ThE radiO Tag NEar ThE mETal ObjEcTs,
magNETic aNd ElEcTrONic dEvicEs (crEdiT cards,
phONEs, kEys, rEmOTEs, ETc.). dO NOT ExpOsE ThE
radiO Tag wiTh high TEmpEraTurEs, mOisTurE, Or
sTrONg impacTs. iT is rEcOmmENdEd TO placE ThE
radiO Tag ON ThE bElT iN aN iNdividual casE Or iN
ThE frONT pOckET Of clOThiNg.
Functions of the button
ACTION FUNCTION
- Short press when ignition is o Arm/disarm
- Press and hold for 3 sec
(ignition on)
Activating/deactivating Service mode
- Press and hold for 6 sec
(programming mode)
Pair a tag with the base unit
- Press and hold for 10 sec Firmware update
SEND
3D
LED indicator
Control button
Antenna 2.4GHz
(Bluetooth 4.2)
Built-in accelerometer
Battery
CR2032
Indication of the SEND LED
SIGNALS DESCRIPTION
one ash Arm/disarm
Conrmation of arming
Low battery level (when installing a battery)
two ashes Conrmation of disarming
three ashes High battery level (when installing a battery)
faded
constant light
Battery is discharged
(when installing a battery, when the button is pressed)
Installation/replacing a battery of the tag CR2032
To install or replace the battery (CR2032), carefully follow these steps:
1. Turn the battery cover in the «OPEN» direction;
2. Remove the battery cover;
3. Remove the battery from the battery compartment and, observing the polarity, install a new one
(when installing a high-quality battery, the
SEND indicator light will produce three red flashes);
4. Install and rotate the battery cover in the «CLOSE» direction. After completing the procedure, you can
continue to operate the radio tag in normal mode.
Battery
СR 2032
(+) side
+
СR2032
1 4
3
2