Daim Ntawv Qhia Tus Neeg Siv

USER AND INSTALLATION MANUALPANDORA MINI MOTO

Immobiliser mode

This mode is used to recognize an owner using authorization devices when the system is disarmed.

When turning on the ignition, the base unit performs a search for authorization devices in the radio

coverage zone. If there is no any authorization device in the radio coverage zone, the system will block

the engine. Engine blocking will occur immediately or at the time a motion sensor detects movement,

it depends on the system settings. When an authorization device appears in the coverage zone, the

system will exit blocking mode and will continue to work in normal mode.

This mOdE is disablEd by dEfaulT. ThE cONfiguraTiON shOuld bE madE by a qualifiEd TEchNiciaN.

Or EmErgENcy disarmiNg sEE «cONTrOl ThE sysTEm iN casE Of EmErgENcy». ENgiNE blOckiNg whilE driviNg pOsEs aN

iNcrEasEd risk. wE sTrONgly rEcOmmENd ThaT yOu bE parTicularly carEful whEN usiNg This mEThOd Of blOckiNg.

Anti-Hi-Jack mode

The Anti-Hi-Jack mode helps to prevent aggressive seizure of a vehicle in case of disappearance

of the authorization devices from the radio coverage zone when system is disarmed and ignition is

on. If the system cannot detect an authorization device, the base unit will perform a delayed engine

blocking. The siren will play the ‘Engine blocking warning’ ringtone before blocking. The engine will

be blocked immediately or at the time the vehicle starts moving, it depends on the system settings.

When an authorization device appears in the coverage zone, the system will exit blocking mode and

will continue to work in normal mode.

This mOdE is disablEd by dEfaulT. ThE cONfiguraTiON shOuld bE madE by a qualifiEd TEchNiciaN.

Or EmErgENcy disarmiNg sEE «cONTrOl ThE sysTEm iN casE Of EmErgENcy». ENgiNE blOckiNg whilE driviNg pOsEs aN

iNcrEasEd risk. wE sTrONgly rEcOmmENd ThaT yOu bE parTicularly carEful whEN usiNg This mEThOd Of blOckiNg.

Code Immobiliser (pin-to-drive) function

This function allows to use the pre-programmed «Immobiliser PIN-code» to disable the engine blocking,

service mode, disarming the security system. The code must be entered using original vehicle controls

(buttons/lever/pedal) and/or additionally installed elements.

AN EXAMPLE OF USING THE FUNCTION

• Turn on the ignition to disable engine blocking or service mode, turning on the ignition is not required if

you want to disarm the system or control time channels.

• Enter the «Immobiliser PIN-code», code can consist max of 4 digits from 1 to 9.

- Press the pre-programmed button/lever/pedal the number of times equals to the first digit.

- Pauses between presses should not exceed 1 second. More than 1 second pause will be interpreted

as the start of the next digit input.

• After entering the code correctly, the system will perform the programmed function.

This mOdE is disablEd by dEfaulT. ThE cONfiguraTiON shOuld bE madE by a qualifiEd TEchNiciaN.

Checking the number of paired devices

The number of paired radio tags/mobile devices can be checked by the number of flashes of the LED

indicator. The number of remotes/tags/mobile device can be checked when switching on the ignition

(system must be disarmed). The number of orange flashes will indicate the number of paired remotes/

bands/watches, the number of green flashes will indicate the number of paired radio tags, a following

red flash will indicate a paired mobile device.

You can also check the number of paired radio tags/mobile devices by taking off and putting back on

battery terminal. The system will emit short sound signals from a siren