Daim Ntawv Qhia Tus Neeg Siv

7
6
USER AND INSTALLATION MANUALPANDORA MINI MOTO
Owner’s personal card
! ErasE ThE prOTEcTivE layEr carEfully. dO NOT usE aNy sharp ObjEcTs
TO avOid damagiNg Of a hiddEN iNfOrmaTiON uNdEr ThE prOTEcTivE layEr.
T
hE iNfOrmaTiON ON ThE OwNEr’s pErsONal card cOuld NOT bE chaNgEd
Or rEsTOrEd iN casE Of damagE Or lOsE. ElimiNaTE Third-parTy accEss TO
This iNfOrmaTiON.
The owner’s personal card contains private information under a
protective layer:
• PIN (the «Secret PIN-code») is a 4-digit number. This code
can be used to disarm the system to deactivate Immobiliser
functions. It can be also used to enter programming mode.
• LOGIN / PASS/ Phone number - not used.
External VALET button
An external VALET button with a three-color status LED indicator
is placed inside a vehicle (see the System modules layout).
The button is used for programming the system, arming/
disarming, activating/deactivating Immobiliser mode.
PIN-codes of the system
The «Secret PIN-code»
(is written on the «Owner’s personal card»)
The «Service PIN-code»
(default value is 1-1-1-1)
The «Immobiliser PIN-code»
(is used for the Code Immobiliser (pin-to-drive) function)
! iT is rEcOmmENdEd ThaT yOu will wriTE dOwN ThE chaNgEd Or crEaTEd valuEs Of all piN-cOdEs. ElimiNaTE Third-parTy
accEss TO This iNfOrmaTiON.
System modules layout
CANNOT BE CHANGED
Service is not available
2-2-2-2
LOGIN / PASS
PIN № PHONE NUMBER
External VALET button
Base unit
Siren
Circuit being blocked
1
2
3
4
5
6
7
Base unit
2.4GHz radio channel, Bluetooth 5.0 protocol (BT5.0) - supports additional Bluetooth devices
(see the «Additional devices» section), including a mobile phone.
Built-in 3D accelerometer is used to detect shock/motion/tilt including 2 separate zones of shock
sensor (alarm and warning), the system allows to adjust sensitivity of each zone, to use data from the
accelerometer to block the engine on movement.
Temperature sensors allow the system to measure temperature of different zones: outside
temperature – built-in sensor of the main unit, engine temperature – external temperature sensor.
System allows to change default sensor’s settings, use the information from the temperature sensor of
the DMS-100 BT, program automatic engine start and stop.
Built-in micro-USB port – update and configuration of the system using the Pandora Specialist
mobile app or Alarm Studio program.