Daim Ntawv Qhia Tus Neeg Siv
39
38
USER AND INSTALLATION MANUALPANDORA MINI MOTO
Level 11 – Programming and conguring an «Immobiliser PIN-code»
The level is divided into 3 sublevels
Selecting buttons
The system will automatically enter the sublevel 11.0 (Selecting buttons) after entering the level
11. The system will wait for buttons pressing. Each pressing will be confirmed with an orange flash
of the LED. You can turn on the ignition (the system will stay in programming mode). The system can
determine buttons via analog «Code Immobiliser 1» and «Code Immobiliser 2» inputs .
After selecting active buttons, press the VALET button to enter the sublevel 11.1 (Entering the PIN-code).
Entering the PIN-code
Program the Immobiliser deactivation PIN-code using the selected button or buttons on this
sublevel. The code can consist of one or more memory cells, each memory cell can store a sequence of
pressing each of the selected Immobiliser buttons.
The code is entered by pressing the selected buttons for at least 1 second. Each pressing is confirmed
with an orange flash of the LED. A pause for more than 1 second and the red LED confirms the input for
the current memory cell, you can start entering the next memory cell. After entering the code, press the
VALET button to enter the next sublevel 11.2 (Confirmation of the PIN-code input).
Confirmation of the PIN-code input
• Confirm the entered PIN-code on this sublevel. Repeat the procedure described above and press the
VALET button. The system will compare two inputs after that.
• If you correctly enter the code twice, the indicator will produce the series of red and green flashes
and the Siren will produce the series of sounds, the new code will be recorded, the system will return
to the programming level 0.
• In case of the incorrect code input the indicator will be lit red and the Siren will sound a long beep,
the system will not change the code and will return to the programming level 0.
Level №13/№15 – Emergency deactivating/activating authorization devices and
functions
See the detailed description in the «Control of the system in case of emergency» section.
Level №50 – Pairing a mobile phone
See the detailed description in the «Mobile application» section.
Level №100 – Exit the programming menu
To exit the programming menu, press and hold the VALET button for more than 10 seconds until the
tenth sound signal of the Siren or until a red flash of the LED. The system will exit programming mode
and will reboot programmatically.
ADDITIONAL DEVICES
Remote control D-035
– is a two-way short-distance communication
device designed to control a security system and receive information
about its state. The remote control can be used as an owner authorization
device.
CONTROL COMMANDS
Arming/Disarming | Service mode
STATUSES
Vehicle and system statuses
OWNER AUTHORIZATION
Immobiliser | Anti-Hi-Jack| Hands Free
OlEd-display | 2.4ghz radiO iNTErfacE (blE 5.0) | ThrEE cONTrOl buTTONs |
s
OuNd iNdicaTOr | vibrO iNdicaTOr| lEd iNdicaTOr | baTTEry | micrO-usb | ip40
Radio tag BT-760 / BT-770 / BT-780 – is a one-way short-distance
communication device designed to control a security system. The tag
can be used as an owner authorization device.
CONTROL COMMANDS
Arming/Disarming | Service mode
OWNER AUTHORIZATION
Immobiliser | Anti-Hi-Jack| Hands Free
2.4ghz radiO iNTErfacE (blE 4.2) | cONTrOl buTTON | lEd iNdicaTOr | mOTiON
sENsOr | cr2032 baTTEry | ip40
Piezo siren PS-331 BT / PS-332 BT is a wireless device for sound
signalization.
PS-331 BT:
sOuNd prEssurE 105-118 db | 2,4 ghz (blE 4.2) radiO iNTErfacE | flExiblE iNpuT
| f
lExiblE OuTpuT | TEmpEraTurE sENsOr | cONTrOl Of cONNEcTiON wiTh a maiN uNiT
| 300
ma, 12v | ip65
PS-332 BT:
sOuNd prEssurE 105-118 db | 2,4 ghz (blE 4.2) radiO iNTErfacE | cONTrOl Of
cONNEcTiON wiTh a maiN uNiT | 300 ma, 12v | ip65