User Guide

INFORMATION ICONS
FIRMWARE UPDATE
Install «Pandora BT» (Android/iOS) or «Pandora Specialist» Apps
on a smartphone or a tablet, equipped with Bluetooth 4.0 or
higher.
• open mobile App, search for a device;
• press and hold control button for 10 sec or connect
micro USB cable while holding control button;
• choose the BAND in the mobile App and start the update:
«INTERNET» – software will be downloaded from a server; «FILE
MANAGER» – select previously downloaded software (Android
only).
PAIRING THE BAND
• Enter the programming level 1 «Pairing remote controls»
in accordance with a security system manual;
• Press and hold control button for 6 sec;
• The security system will conrm pairing with a beep. Finish
pairing in accordance wih the security system manual.
ACCEPTANCE CERTIFICATE
Serial number_______________ Date of production___________
Responsible person's signature (stamp)_____________________
Packager ______________________
Signature (Personal stamp)
WARRANTY CARD
Model
Pandora Band
Serial number_________________________________________
Date of purchase «_______»__________________20________y
_____________________________________________________
Seller's (installer's) stamp
Seller's signature_______________________________________
12 48
6699
P
SECURITY ZONE ICONS
Security
system status
Motion
sensor
Tilt
sensor
Add. sensor
(warning level)
Add. sensor
(alarm level)
Shock sensor
(warning level)
Shock sensor
(alarm level)
Ignition
Brake
pedal
Trunk
Low
voltage
Front hood
Doors
Current
time*
Process
scale
Counter*
Charge
indicator
Connection
state
* PANDORA BAND AUTOMATICALLY SYNCHRONIZES THE TIME WITH THE
SYSTEM BASE UNIT AND DISPLAYS COUNTED STEPS THE COUNTER IS
RESET BY TIME  0:00 AM.