User Guide

PRESS
briefly
(ignition o)
1 sec
(engine running)
rming/disarming the security
system
Switch on «Hold On» mode
2 sec
(system disarmed)
Change the «Main owner's
phone number»
3 sec
(ignition on)
Activate/deactivate
Service mode
3 sec
(band is switched o)
Switch on the BAND
6 sec
(programming)
Pair the BAND with a base unit
8 sec
(band is switched on)
Switch o the BAND
10 sec
Firmware update
FUNCTION
BAND
SET
1. Quick guide 1 pc.
2. Capsule 1 pc.
3. Band (black) 1 pc.
4. Charging cable (USB - micro USB) 1 pc.
5. Packaging 1 pc.
! THE MANUFACTURER RESERVES THE RIGHT TO CHANGE THE SET AND
CONSTRUCTION OF THE PRODUCT TO IMPROVE ITS TECHNOLOGICAL AND
OPERATIONAL PARAMETERS WITHOUT A NOTIFICATION.
GENERAL INFORMATION
Wrist-wearable band designed to conveniently control vehicle
equipped with Pandora Bluetooth system (BT5.0, BT5.2).
! PANDORA BAND IS A UNIFIED CONTROL DEVICE  ITS OPERATION DEPENDS
OF THE SECURITY SYSTEM FUNCTIONAL. IT IS NECCESSARY TO ENABLE USE
D030 AS A RADIO TAG OPTION TO USE BAND AS AN OWNER'S
AUTHORIZATION DEVICE.
SWITCH ON/OFF THE BAND
Press and hold the button for 3 sec to switch ON, 8 sec to
switch OFF.
CHARGING THE BAND
There is a battery charge indicator on the display. Charge the
battery if the device does not turn on or the charge indicator
shows low level (10%).
• remove capsule from the band;
• connect the micro-USB connector of the cable to the capsule;
• connect the USB connector of the cable to the charger
(not included in the set);
• charge the battery until the indicator is full (100%);
• disconnect the cable and insert the capsule
into the band - device is ready for use.
DISPLAY: OLED, 12832
INTERFACE: Bluetooth 5.0
SENSORS: accelerometer
ACCU: Li-Po, 85 mAh
CHARGING INPUT: microUSB
ADDITIONALLY:
CONTROL BUTTON
OPERATING RANGE:
from –10°C to +40°C
Our web-site: pandorainfo.com
Customer support: [e-mail]
BUTTON'S FUNCTIONS
v 1.0
COMPATIBILITY
Pandora: Pandora Elite / Pandora Smart Pro V3 /
Pandora Camper Pro V2 / Pandora Camper Mini
QUICK GUIDE