IMPORTANT SAFETY INSTRUCTIONS WARNING ~ To reduce the risk of fire, electric shock, or injury to persons when using your appliance, follow basic precautions, including the following: 1) Read all instructions before using the appliance. 2) Do not dry articles that have been previously cleaned in, washed in, soaked in, or spotted with gasoline, dry-cleaning solvents, or other flammable or explosive substances, as they give off vapors that could ignite or explode.
Name of Components Control Panel Air intake shroud Exhaust vent Operating your dryer Electrical Requirements The unit is required to be plugged into a three pin socket that is reliably grounded. The power supply must be 110A. Plug the power cord into the socket. Loading the dryer it is recommended that items are placed into the dryer one by one at a time. This ensures they are not tangled which results in uneven drying.
1 Poa 2 Bunyan J Preset Press “Preset” repeatedly to choose preset time from 1H, 2H, 4H and BH, then press "Start Pause” to start program, the preset ime shown in display window will countdown by minute. 4 Wrinkle Guard Press "Winkle Guard”, the wrinkle guard indicator will light up and the dryer will reverse the rotation direction at the end of this drying cycle to improve drying efficiency.
i 1 is unavoidable that fabrics that contain vegetable of cooking of or have been contaminated by hair care products be placed in Bimbo fryer that shooed fest be washed in hot water with extra detergent « Dos will reduce but ret dire the Si gal Thi cod down cycle of lube dryers should be used to reduce the temperature of the lama.
Maintenance Cleaning of the Air Intake Filter Cleaning the Lint Filter Please unplug the power cord prior to any cleaning. The lint filler must be in lace whenever drying I must be cleaned before each ise 1. Removing the filters into the four hoes around the exhaust vert shroud. The filler is in 3 parts: Exhaust vert shroud, Ent filter and exhaust filter (as shown in figure) Te here ech be 2. Cleaning the filter Separate "exhaust vent shroud” "int fer” and “exhaust filter’.
Troubleshooting Review the following pages before calling for service. Problem Possible Cause What the power cord inserted firmly? * Insert the power cord firmly Program does not work Drum does not turn | ® Is the door closed? * Close the door. * |s the power cord inserted? * Insert the power cord firmly. + Does the receptacle have power? * Check the power cord receptacle.
