Wireless Communication System Center Module Operating Instructions WX-CC2010 Series ENGLISH Model No. Digital Technology WX-CC 2010 TRAN SCEIV MONIT ER OR VEHICLE PRESENT A B WX -C T2 02 0 Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use.
ENGLISH VERSION FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. ENGLISH 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not use near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
CONTENTS IMPORTANT SAFETY INSTRUCTIONS ...................................................................................................... 3 PREFACE..................................................................................................................................................... 5 PRECAUTIONS............................................................................................................................................
PREFACE Panasonic WX-CC2010 Center Module is designed for Panasonic Wireless Communication System, which is used with drive-through menu boards, etc. The system operates on UHF frequencies, and offers multi-channel flexibility making use of the PLL (Phase Locked Loop) technology. New Functions of the WX-CC2010 (New Technological Features) • A remote speaker can be added to the system.
PRECAUTIONS This center module is a sensitive device and should be regarded as such. If handled carelessly, the hazard of electric shock may exist. 7. Replace a missing microphone cover and ear speaker cover of the headset with a new one to prevent distortion or loss of audio. In order to utilize the instrument to its fullest potential, please consider the following precautions. 8. Repair or replace any defective components. 1. Handle the equipment with care.
PANASONIC WX-CC2010 SERIES SYSTEM PARTS AND ACCESSORIES Note: Illustrations may differ from actual products.
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS ■ WX-CC2010 Center Module AUX IN TALK PAGE BEEP REMOTE AUX IN SEL TALK MONITOR OFF OFF OFF OFF ON ON ON ON LINE G/MIC OFF ON WX-CC CHANNEL CONTINUES USA/CANADA T/B TBC1 LEVEL TBC2 DNR1 DNR DNR2 EFFECT DNR3 A OFF USA OFF B ON CND ON OFF OFF ON ON OFF ON OFF ON POWER CIRCUT PROTECTOR ON NORMAL OVERRIDE ON OFF OFF CH SELECT 1 8 7 2 3 CAUTION 6 5 4 USE WITH SPECIFIED EQUIPMENT SEE ITS MANUAL BEFORE CONNECTING 2010 TRAN SCEIV MONIT ER OR
Notes: • The following switches and terminals should be used by qualified service personnel or system installers only. • To change the setting of the following switches, turn off the power of the center module, then turn it back on. q Auxiliary Input On/Off Switch (REMOTE AUX IN, ON/OFF) Set this switch to ON to output the audio (that has been input from the AUX INPUT terminals) to the remote speakers.
w Vehicle Detector Normal/Override On/Off Switches (VEHICLE DETECTOR, NORMAL/OVERRIDE ON/OFF) NORMAL: The vehicle detector turns on only when a vehicle is detected at the menu board. When the detector is turned on, a beep tone is heard in the headset. After the beep tone, the menuboard speaker turns on to allow the communication with the customer. When the vehicle leaves, the vehicle detector turns off. OVERRIDE ON: The vehicle detector is always turned on. OFF: Vehicles are not detected at the menuboard.
!4 Day/Night Selection Switch (DAY/NIGHT) In the Day mode, you will not hear the beep tone of the other lane in the headset that sounds when the vehicle detector is on and that sounds when you press the button T of the order taker unit. In the Night mode, you will hear the beep tone of either lane in the headset when the vehicle detector of either lane is on. Once you press the button T, you will no longer hear your lane’s beep tone.
■ WX-C516 Power Transformer ■ WX-C550 Speaker Microphone $1 $0 #3 #4 #5 #3 Mounting Hole This hole is used for mounting the power transformer onto the wall plates. #6 Input Cord A pigtail cord is provided for the speaker input. Its length is approx. 3 meters. #4 Power Plug To prevent fire or electrical shock, connect this directly to a 3-plug grounded receptacle of 120 V AC, 60Hz. #7 Mounting Bracket AU-type mounting bracket with screw holes is provided as a standard accessory with the WX-C550.
OPERATING PROCEDURES Refer to WX-CT2020/WX-CH2050A Operating Instructions for details. COMPATIBILITY WX-CC2010 and WX-C1020 When PAGE is pressed during the TALK LOCK function is activated, the TALK LOCK function is canceled and PAGE sound comes out of the menu board. TROUBLESHOOTING Problem Check item The communication between the order taker units and menu board cannot be established. (The TRANSCEIVER MONITOR indicator is not blinking in red.
SPECIFICATIONS WX-CC2010 Center Module Operating Frequency: Type of Emission: Type of Antenna: Power Supply: Power Consumption: Menuboard Speaker A and B Output: Remote Speaker A and B Output: Vehicle Detector Input: Dimensions: Weight (Including Antenna): Ambient operating temperature: Transmit; 468.6125 MHz - 469.3875 MHz Receive; 463.6125 MHz - 464.
Panasonic System Solutions Company, Unit Company of Panasonic Corporation of North America Security Systems www.panasonic.com/security For customer support, call 1.877.733.3689 Executive Office: Three Panasonic Way 2H-2, Secaucus, New Jersey 07094 Zone Office Eastern: Three Panasonic Way, Secaucus, New Jersey 07094 Central: 1707 N. Randal Road, Elgin, IL 60123 Southern: 1225 Northbrook Parkway, Suwanee, GA 30024 Western: 6550 Katella Ave., Cypress, CA 90630 © 2003 Matsushita Electric Industrial Co., Ltd.
