Installation Guide Network Camera WV-SP306, WV-SP305 WV-SP302 WV-SP306E, WV-SP305E WV-SP302E Model No. 306 -SP WV Lens: Option (This illustration represents WV-SP306.) Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. The model number is abbreviated in some descriptions in this manual.
WARNING: • Apparatus shall be connected to a mains socket outlet with a protective earthing connection. • The mains plug or an appliance coupler shall remain readily operable. • To prevent fire or electric shock hazard, do not expose this apparatus to rain or moisture. • The apparatus should not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, should be placed on the apparatus.
We declare under our sole responsibility that the product to which this declaration relates is in conformity with the standards or other normative documents following the provisions of Directives 2006/95/EC and 2004/108/EC. Wir erklären in alleiniger Verantwortung, daß das Produkt, auf das sich diese Erklärung bezieht, mit den folgenden Normen oder normativen Dokumenten übereinstimmt. Gemäß den Bestimmungen der Richtlinie 2006/95/EC und 2004/108/EC.
Contents Important safety instructions....................................................................................................... Limitation of liability..................................................................................................................... Disclaimer of warranty................................................................................................................. Preface......................................................................................
Important safety instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Limitation of liability THIS PUBLICATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF THE THIRD PARTY'S RIGHT. THIS PUBLICATION COULD INCLUDE TECHNICAL INACCURACIES OR TYPOGRAPHICAL ERRORS. CHANGES ARE ADDED TO THE INFORMATION HEREIN, AT ANY TIME, FOR THE IMPROVEMENTS OF THIS PUBLICATION AND/OR THE CORRESPONDING PRODUCT (S).
WV-SP306 • Maximum image capture size (1280 x 960 (Aspect ratio of 4:3), 1280 x 720 (Aspect ratio of 16:9)) • Compatible with the auto back focus (ABF) function, color mode / black & white mode switching WV-SP305 • Maximum image capture size (1280 x 960 (Aspect ratio of 4:3), 1280 x 720 (Aspect ratio of 16:9)) • Compatible with the focus assist (F. A.
Auto back focus (ABF) function SP306 Auto Back Focus (ABF) ensures easy installation and stable focus in both color and black & white modes. Focus assist (F. A.) function SP305 SP302 During the manual focus adjustment, this function indicates the best focus position. Color mode / black & white mode switching available SP306 Images will be displayed clearly even at night since the camera will be automatically switched from the color mode to the black and white mode under low illumination condition.
System requirements for a PC CPU: Memory: Network Interface: Audio interface: Monitor: OS: Web Browser: Other: Intel® CoreTM 2 Duo 2.4 GHz or faster recommended 512 MB or more (A minimum of 1 GB memory is required when using Microsoft® Windows® 7 or Microsoft® Windows Vista®.
Trademarks and registered trademarks • Microsoft, Windows, Windows Vista, Internet Explorer, ActiveX, and DirectX are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. • Microsoft product screen shot(s) reprinted with permission from Microsoft Corporation. • Intel and Intel Core are trademarks or registered trademarks of Intel Corporation in the United States and other countries.
Precautions Refer installation work to the dealer. Installation work requires technique and experiences. Failure to observe this may cause fire, electric shock, injury, or damage to the product. Be sure to consult the dealer. Avoid installing this bracket in the locations where salt damage occurs or corrosive gas is produced. Otherwise, the mounting portions will deteriorate and accidents such as a fall of this product may occur. Stop the operation immediately when something is wrong with this product.
Turn the power off when do wiring of this product. Failure to observe this may cause electric shock. In addition, short circuit or wrong wiring may cause fire. Turn the power off when cleaning of this product. Failure to observe this may cause injury. [Precautions for use] This system is designed to be used indoors. This product is not operable outdoors. This product has no power switch. When turning off the power, turn off a circuit breaker.
• When some SDHC/SD memory cards are used with this product, the product may not work properly or performance deterioration may be caused.Use the SDHC/SD memory cards recommended in page 34. Code label The code labels (accessory) are required at inquiry for trouble. Use caution not to lose these labels. It is recommended to paste one of the labels onto the CD-ROM case.
Precautions for Installation Panasonic assumes no responsibility for injuries or property damage resulting from failures arising out of improper installation or operation inconsistent with this documentation. This camera is designed to be used indoors. This camera is not operable outdoors. Do not expose this camera to direct sunlight for hours and do not install the product near a heater or an air conditioner. Otherwise, it may cause deformation, discoloration and malfunction.
Angle adjustment Be sure to loosen the screw of this product mount bracket when the camera angle is adjusted. If the camera angle is changed when the screw is tight, excessive force is applied to the camera mount bracket and camera, and accordingly they may be damaged. Be sure to tighten the screw securely after camera angle adjustment.
Major operating controls W ALC lens connector Slide cover Lens (option) SDHC/SD memory card slot W ABF F.A.
Lens mounting Slowly rotate the lens clockwise to mount the lens and connect the lens cable to the ALC lens connector of the camera. Important: SP305 SP302 • It is impossible to use lenses without the focus adjustment function or zoom lenses. ALC lens connector Zoom lock knob CS-mount lens (option) Protruded portion from mount face: ø20 mm {25/32 inches} or less Protruded portion from flange face: 4.5 mm {5/32 inches} or less T W 1 3 Focus ring Pin No.
Note: • The most common use of a varifocal lens and a zoom lens Note that the adjustment method is different depending on the type. For further information, refer to the operating instructions for the lens to be used. Adjust the back focus after positioning the zoom ring at the "T" end and positioning the focus ring at a step short of the "F" end. • Depending on the lens to be used, if the zoom ring is fully rotated in the "W" direction, the periphery may become dark.
x Fasten the zoom lock knob. c Press the focus assist button. → "FOCUS ADJUSTMENT" menu will be displayed. The focus assist function will be activated to perform the optimum adjustment. v When the focus ring is positioned near the best focus position, the position will automatically be memorized as the "PEAK HOLD" position.
Insert/remove an SDHC/SD memory card Important: • Before inserting an SDHC/SD memory card, turn off the power of the camera first. • When inserting an SDHC/SD memory card, make sure the direction. • Before removing the SDHC/SD memory card, select "Not use" for "About SD memory card" on the [SD memory card] tab of "Basic" on the setup menu first. Turn off the power after "Not use" selection, and then unload the SDHC/SD memory card.
Installation Connect the safety wire The following is an example of safety wire connection. Important: • Be sure to install the safety wire. Ask your dealer for installation. For mounting on ceiling z Remove the tripod mount base on the top of the camera. Mounting screws Tripod mount base Safety wire plate for ceiling (accessory) Wire engaging hole (rear) x Align the tripod mount base with the safety wire plate for ceiling (accessory) and attach them to the camera with the mounting screws.
For mounting on wall z Put the tripod mount base on the bottom of the camera. Secure the safety wire lug for wall (accessory) to the camera mount screw hole with the wire lug fixing screw (accessory). Wire engaging hole Important: • Be sure to use the provided fixing screws for the safety wire lug and the removed screws for the camera mount base. When using different length screws, it may damage the camera or cause the camera to fall. (Recommended tightening torque: 0.39 N·m {0.
Camera mounting The camera is mounted on the camera mount bracket and the safety wire is secured. Important: • The installation area shall be strong enough to hold the camera and camera mount bracket. • The camera mount bracket shall be mounted on the foundation part of the construction or a part with adequate strength. • To prevent the mounting strength from becoming lower, do not use wooden screws to secure the camera mount bracket.
x Put the connection hook of the safety wire on the safety wire plate or the safety wire lug secured on the foundation part of the construction or a part with adequate strength. Important: • The safety wire shall be adjusted to remove slack.
Connection Caution: • FOR UL LISTED MODEL(S), ONLY CONNECT 12 V DC CLASS 2 POWER SUPPLY. Before starting the connection, turn off the power of this camera and the devices to be connected. Before start the connection, prepare the required devices and cables. z Connect the RCA pin cable to the monitor output connector for adjustment on the rear (only for adjustment of the angle field of view). Connect to the video monitor, etc.
v Connect external devices to the EXT I/O terminal. When connecting an external device, remove 9 mm - 10 mm {11/32 inches - 13/32 inches} of the outer jacket of the cable and twist the cable core to prevent the short circuit first. Specification of cable (wire): 22 AWG - 28 AWG Single core, twisted r GND • Check whether the stripped part of the e AUX OUT wire is not exposed and is securely connected.
When using 12 V DC power supply* 10BASE T/100BASE-TX AUDIO OUT q Loosen the screw of the power cord plug (accessory). w Connect the cable of the 12 V DC power supply* to the power cord plug. Strip 3 mm to 7 mm {1/8 inches to 9/32 inches} from the end of the wire, and twist the stripped part of the wire sufficiently to avoid short circuit. Specification of cable (wire): 16 AWG - 24 AWG, Single core, twisted • Check whether the stripped part of the wire is not exposed and is securely connected.
Connection example when connecting to a network using a PoE hub Video monitor (for adjustment use only) Speaker with amplifier (option) PoE device (hub) LAN cable (category 5 or better, straight, STP*) Microphone (option) LAN cable (category 5 or better, straight, STP*) PC Speaker with amplifier (option) LAN cable (category 5 or better, straight, STP*) Microphone (option) Video monitor (for adjustment use only) LAN cable (category 5 or better, straight, STP*) * PAL models only Import
Configure the network settings Install the software Before installing the software, read the readme file on the provided CD-ROM first. Software included on the provided CD-ROM • Panasonic IP setting software Configure the network settings of the camera. Refer to the following for further information. • Viewer Software "Network Camera View 4" It is necessary to install the viewer software "Network Camera View 4" to display images on a PC.
z Start the Panasonic IP setting software by double-clicking the "EasyIpSetup.exe" icon on the provided CD-ROM. x Click the [IP setting] button after selecting the MAC address/IP address of the camera to be configured. Note: • When using a DHCP server, the IP address assigned to the camera can be displayed by clicking the [Refresh] button of the IP setting software. • When a duplicate IP address is used, the corresponding MAC address/IP address will be displayed shaded.
Troubleshooting Before asking for repairs, check the symptoms with the following table. Contact your dealer if a problem cannot be solved even after checking and trying the solution in the table or a problem is not described below. Symptom Cause/solution Reference pages Power is not turned on. When using DC power supply • Is 12 V DC power supply connected to the power supply terminal? → Check whether the connection is appropriately established.
Specifications ● Basic Power source: Power consumption: 12 V DC, PoE (IEEE802.3af compliant) WV-SP306 12 V DC*: 350 mA, PoE: 4.4 W (Class 2 device) WV-SP305, WV-SP302 12 V DC*: 270 mA, PoE: 3.4 W (Class 2 device) * FOR UL LISTED MODEL(S), ONLY CONNECT 12 V DC CLASS 2 POWER SUPPLY. Ambient operating temperature: –10 °C to +50 °C {14 °F to 122 °F} Ambient operating humidity: Less than 90 % (no condensation) Monitor output (for adjusting the angular field of view): VBS: 1.
0.019 lx {0.0019 footcandle} (F1.4, Auto slow shutter: max. 16/30 s, AGC: High)* BW: 0.2 lx {0.02 footcandle} (F1.4, Auto slow shutter: Off (1/30 s), AGC: High) 0.013 lx {0.0013 footcandle} (F1.4, Auto slow shutter: max. 16/30 s, AGC: High)* * Converted value WV-SP302 Color: 0.2 lx {0.02 footcandle} (F1.4, Auto slow shutter: Off (1/30 s), AGC: High) 0.013 lx {0.0013 footcandle} (F1.4, Auto slow shutter: max. 16/30 s, AGC: High)* BW: 0.
Resolution: Aspect ratio: 4:3 (WV-SP302) H.264 800 × 600/ VGA (640 × 480)/ QVGA (320 × 240), max. 30 fps MPEG-4 VGA (640 × 480)/ QVGA (320 × 240), max. 30 fps JPEG 800 × 600/ VGA (640 × 480)/ QVGA (320 × 240), max. 30 fps Aspect ratio: 16:9 H.264 640 × 360/ 320 × 180, max. 30 fps JPEG 640 × 360/ 320 × 180, max. 30 fps * MPEG-4 is not supported. Image compression method: H.
SD memory card: 256 MB, 512 MB, 1 GB, 2 GB (except miniSD card and microSD card) *1 Either H.264 or MPEG-4 is selectable. *2 Transmission for 2 streams can be individually set in the same compression method. *3 Refer to "Notes on Windows Vista®/ Windows® 7" (PDF) for further information about system requirements for a PC and precautions when using Microsoft Windows 7 or Microsoft Windows Vista. *4 When using IPv6 for communication, use Microsoft Windows 7 or Microsoft Windows Vista.
Information for Users on Collection and Disposal of Old Equipment and used Batteries These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC and 2006/66/EC.
