Operating Instructions Ceiling Mount Bracket WV-Q175 WV-Q175E Model No. Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. The model number is abbreviated in some descriptions in this manual.
CONTENTS Preface ..........................................................................................................................................3 Precautions ...................................................................................................................................3 Major operating controls and their functions .................................................................................5 Installations ....................................................................
Preface This ceiling embedded bracket is exclusively designed to mount a color CCTV camera or a network camera. Refer to the catalog or the operating instructions of the camera for supported cameras. This bracket is an embedded type to reduce the exposed portion of the camera body. Precautions • Refer installation work to the dealer. Installation work requires technique and experiences. Failure to observe this may cause fire, electric shock, injury, or damage to the product.
• Do not rub the edges of metal parts with your hand. Failure to observe this may cause injury. • Make sure that the installation area is strong enough to hold the total weight of the camera assembly before installation. • The camera and the ceiling mount bracket should be fixed using the provided fixing screws, and make sure that the both of them are fixed firmly. • When the ceiling mount bracket is not necessary anymore, remove from the ceiling. • Avoid installing in the following locations.
Major operating controls and their functions Roof space Safety wire angle (Accessory) Safety wire (Accessory) * Read the operating instructions of the camera as well. Installations Be sure to read "Precautions" before installation. It is recommended to read them while referring the operating instructions of the camera together. 1. Put Template A (accessory) against the ceiling and make a hole. q Make 4 holes of 12 mm {1/2 inches} in diameter.
2. Install two anchor bolts (locally procured: M10 recommended) into the concrete ceiling. q Install an anchor bolt in the center of the hole made in the 2nd Anchor bolt 1st Anchor bolt (locally procured) step 1. (locally procured) Nut (locally procured) w Determine the anchor bolt Determine the anchor Anchor bolt length by use of Template B bolt length (accessory). e Use Template B to decide the nut position, and fix it.
4. Connect this mount bracket to the tip of the safety wire. Roof space Safety wire (Accessory) Insert the mount bracket into the hole 6. Secure the mount bracket to the ceiling board with the ceiling board fixing screws (4 positions). Turning the ceiling board fixing screws clockwise provides ceiling board tightening between the bottom of the mount bracket and ceiling board fixing bracket resulting in mount bracket securing. (Recommended tightening torque: 0.78 N·m {0.
. Follow the procedure according to the model of the camera to be installed. Protrusion q Mount the camera attachment (supplied with the camera) to this bracket. Use 4 fixing screws (accessory) to secure the camera attachment firmly as shown in the drawing. (Recommended tightening torque: 0.78 N·m {0.
. Mount the decorative cover on this mount bracket. • Mount the decorative cover on the camera mounting plate with engaging the projections of the decorative cover with the hooks for the decorative cover. • Turn the decorative cover clockwise until the cover clicks while pressing the cover upward to lock the cover.
Specifications Ambient temperature Dimensions Mass Finish 10 –10 °C to +50 °C {–14 °F to 122 °F} 204.4 mm {8-1/16 inches} in diameter x 143.4 mm {5-5/8 inches} in height Approx. 700 g {1.
Standard accessories Operating Instructions (this book) ................. 1 pc. The following are for installation. Safety wire ..................................................... 1 pc. Safety wire angle ........................................... 1 pc. Template A .................................................... 1 pc. Template B .................................................... 1 pc. Fixing screw (M4 x 8) .................................... 5 pcs. (incl.
For U.S. and Canada: Panasonic System Networks Company of America, Unit of Panasonic Corporation of North America www.panasonic.com/business/ For customer support, call 1.800.528.6747 Three Panasonic Way, Secaucus, New Jersey 07094 U.S.A. For Europe and other countries: http://panasonic.net Importer's name and address to follow EU rules: Panasonic Testing Centre Panasonic Marketing Europe GmbH Winsbergring 15, 22525 Hamburg F.R.Germany Panasonic Canada Inc.
