ENGLISH Camera Drive Unit WV-PS15 PO WE R ON OFF V-PS Camera Drive Unit W 15 Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. ESPAÑOL FRANÇAIS Model No.
ENGLISH VERSION We declare under our sole responsibility that the product to which this declaration relates is in conformity with the standards or other normative documents following the provisions of Directives EEC/73/23 and EEC/89/336. Noi dichiariamo sotto nostra esclusiva responsabilità che il prodotto a cui si riferisce la presente dichiarazione risulta conforme ai seguenti standard o altri documenti normativi conformi alle disposizioni delle direttive CEE/73/23 e CEE/ 89/336.
PREFACE ...................................................................................................................................................... 4 FEATURES .................................................................................................................................................... 4 PRECAUTIONS .............................................................................................................................................
PREFACE The Panasonic WV-PS15 Camera Drive Unit drives VP (Video and Power) multiplex camera. This simple system is designed to meet the surveillance and security needs of offices, factories, public and residential buildings, etc. FEATURES • VP multiplex camera of the specified model can be driven by WV-PS15. • Controls camera setup through the specified outboard device connected. • A single coaxial cable connects camera of the specified model and camera input to the Camera Drive Unit.
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS ■ Front View q POWER ■ Rear View w e r CAMERA IN VIDEO OUT AUDIO OUT t y u VD/SYNC VD/SYNC IN OUT SIGNAL GND ON OFF (4V[p-p]75Ω) i q Power On/Off Switch (POWER ON/OFF) This switch is used to turn the camera drive unit and connected camera on and off. The indicator lights up when the camera drive unit is switched on. When turns this switch off, the power supply does not interrupt.
SYSTEM CONNECTION Cautions: • Keep the POWER switch of the camera drive unit in the OFF (l) position during connection. If camera drive unit power is kept on during connection, the protection circuit that protects the unit in case of the wrong connection will operate and prevent the cameras from functioning. • Connect only VP multiplex camera of the specified model. If other camera is connected, the protection circuit will keep the camera drive unit out of operation.
1. Connect a coaxial cable from a camera to a CAMERA IN connector of the camera drive unit. Maximum cable lengths are approximately as shown below. Coaxial Cable Type DC R/300m (1 000 ft.) of Inner Conductor Maximum Cable Length RG-59/U RG-6/U Less than 30 Ω Less than 12 Ω 200 m (660 ft.) 500 m (1 650 ft.) The maximum DC resistance of the cable between the camera and camera drive unit is 20 Ω.
SPECIFICATIONS Power Source: Power Consumption: Camera Input: Video Output: Audio Output: Camera Power Supply: Maximum Distance to Camera: Maximum DC Resistance: VD/SYNC Input: VD/SYNC Output: Ambient Operating Temperature: Ambient Operating Humidity: Dimensions: Weight: 220-240 V AC 50 Hz Approx. 17 W 1.0 V[p-p]/75 Ω, BNC Connector 1.0 V[p-p]/75 Ω, BNC Connector –10 dB/600 Ω unbalanced, RCA pin jack Regulated current multiplex method (350 mA) Coaxial DC R/300m (1 000 ft.
Matsushita Electric Industrial Co., Ltd. Central P.O. Box 288, Osaka 530-91, Japan N0100-0 © Matsushita Communication Industrial Co.,Ltd.
