User Guide

-7-
1. Connect the coaxial cable between the camera
and CAMERA IN connector of the camera drive
unit. The approximate maximum cable length is as
follows:
Coaxial DC R/1000 ft. of Maximum
Cable Type Inner Conductor Cable Length
RG-59/U Less than 30
Ω 200 m (660 ft.)
RG-6/U Less than 12 Ω 500 m (1,650 ft.)
The maximum DC resistance of the cable between
the camera and camera drive unit is 20 Ω.
2. Connect the coaxial cable between the video moni-
tor and VIDEO OUT connector of the camera drive
unit. The approximate maximum cable length is as
follows:
Type of
coaxial cable
RG-59/U
(3C-2V)
RG-6/U
(5C-2V)
RG-11/U
(7C-2V)
Recommended
Maximum
cable length
(m)
(ft)
250
825
500
1,650
600
1,980
Note:
If the length of the coaxial cable between the
camera drive unit and the video monitor
exceeds the distance shown in the above
table, a cable loss compensator should be
used between the camera drive unit and the
video monitor.
3. After connecting the specified camera to the cam-
era drive unit, connect the audio cable between the
monitor and AUDIO OUT connector of the camera
drive unit.
External VD/SYNC Signal
Signal Level
The VD/SYNC IN connector accepts the VD or VS syn-
chronizing signal for external synchronization.
• VD: 4 V[p-p] / 75 Ω