Video Monitor Operating Instructions Video Monitor WV-LD Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. FRANÇAIS ENGLISH Model Nos.
ENGLISH VERSION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN For Canada This Class A digital apparatus complies with Canadian ICES-003. For U.S.A CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. ENGLISH 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
LIMITATION OF LIABILITY THIS PUBLICATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF THE THIRD PARTY’S RIGHT. THIS PUBLICATION COULD INCLUDE TECHNICAL INACCURACIES OR TYPOGRAPHICAL ERRORS. CHANGES ARE ADDED TO THE INFORMATION HEREIN, AT ANY TIME, FOR THE IMPROVEMENTS OF THIS PUBLICATION AND/OR THE CORRESPONDING PRODUCT (S).
CONTENTS IMPORTANT SAFETY INSTRUCTIONS ........................................................................................ 3 LIMITATION OF LIABILITY ............................................................................................................. 4 DISCLAIMER OF WARRANTY ....................................................................................................... 4 PRECAUTIONS .........................................................................................................
PRECAUTIONS • Refer all work related to the installation of this apparatus to qualified service personnel or system installers. • Do not mount the monitor on places subject to constant vibrations. That may cause trouble or damage. • Use only the supplied power cord or AC adapter. • Do not block the ventilation opening or slots on the cover. To prevent the apparatus from overheating, place it at least 5 cm {2 inches} away from the wall. • Do not drop metallic parts through slots.
PREFACE Video Monitor WV-LD1500/2000 is 15"/20" LCD monitor, using a high-brightness liquid crystal panel and (3D)* separation circuit for improved definition of picture display. *NTSC system only FEATURES • Built-in VGA panel with high brightness, high contrast ratio • Supporting composite video signal, S-video signal, and analog RGB signal for personal computer (PC) • Automatically switchable NTSC and PAL system • PC display capacity supporting VGA (640x480) resolutions.
MAJOR OPERATING INSTRUCTIONS AND THEIR FUNCTIONS ■ Front View ■ Rear View DC IN PC IN IN OUT IN OUT AUDIO S-VIDEO VIDEO-B IN OUT VIDEO-A 1500 Video Monitor WV-LD w r y qe t u !1 i o !0 !3 !5 !7 !2 !4 !6 !8 !9 These are the illustrations of WV-LD1500. q Power Button Powers on or off the monitor. Note: Power is supplied from the AC adapter even while the monitor is OFF. w Power Indicator This indicator is lighting while power is supplied to the monitor.
!3 Audio output connector (AUDIO OUT) Supplies an audio signal accepted by the AUDIO IN connector to another external device. !6 Video output B connector (VIDEO-B OUT) Supplies a composite video signal accepted by the VIDEO-B IN connector to another external device. !4 S-video input connector (S-VIDEO IN) Accepts an S-video signal from an external device. Note: This connector and the VIDEO-B IN connector is connected to the same device.
INSTALLATIONS WARNING ■ Mounting on the Wall The installations described in the figures should be made by qualified service personnel or system installers. To mount the monitor on the wall, a mounting bracket (locally procured, VESA standard 100 mm {3-9/10"} pitch) and screw (M4, locally procured) are required. Caution: Attach this monitor to a flat wall with a locally procured mounting bracket. After the installation, secure the monitor to prevent dropping.
CONNECTIONS ■ Connection Example Other video monitors PC PC output (VGA) Video input IN DC IN Power cord (supplied) PC IN OUT AUDIO S-VIDEO IN OUT VIDEO-B IN Audio input OUT VIDEO-A AC adapter (supplied) Audio output S-video output Video output Digital disk recorder 11
■ Camera Connection ● To Output Audio Signal Connect the video output connector of camera to the VIDEO IN connector with a coaxial cable. Note: Make sure that the cable length between the camera and monitor is as follows. Connect the AUDIO IN connector of this monitor to the audio output connector of digital disk recorder (or other recording devices) with an audio cable. Cable type Cable length RG-59/U 3C-2V 250 m {820 ft.} RG-6/U 5C-2V 500 m {1 640 ft.} RG-11/U 7C-2V 600 m {1 968 ft.
POWER-ON Before operation, check the connections between monitors and external devices (cameras, digital disk recorders, etc.) (Refer to p. 11.) 1. Press the power button. The monitor will be powered on, and the power indicator will light up in green. Notes: • When no input signal is supplied to the monitor, "NO SIGNAL" will be displayed on the screen. "NO SIGNAL" will continue to be displayed until an input signal is supplied. 2. Press the INPUT SELECT button.
AUDIO VOLUME CONTROL By pressing the + or – button during picture display, you can adjust the audio volume level. While the + or – button is pressed, the volume level is displayed on the screen. –: Audio volume level goes down. +: Audio volume level goes up. Setting item Effect Setting value AUDIO +: Audio volume level goes up. 0 to + 40 –: Audio volume level goes down. VIDEO ADJUSTMENT AND SETUP ■ VIDEO ADJUST Menu Setup of this monitor will be performed in the VIDEO ADJUST menu.
3 Move the cursor to the following setting items by pressing the C or D button. Then, adjust the levels by pressing the + or – button. Setting item Effect Setting value BRIGHTNESS +: Brightness level goes up. –: Brightness level goes down. – 20 to + 20 CONTRAST +: Contrast level goes up. –: Contrast level goes down. – 20 to + 20 SHARPNESS +: Picture quality becomes sharper. –: Picture quality becomes softer. – 15 to + 15 COLOR +: Color density level goes up. –: Color density level goes down.
4. Move the cursor to AUTO by pressing the C or D button. Then, press the MENU button. The picture display position will be adjusted automatically. Manual adjustment If picture display position is not properly adjusted, move the cursor to the desired setting item by pressing the C or D button. Then, adjust the levels by pressing the + or – button. Setting item Effect Setting value H.POSITION +: Moves rightward. –: Moves leftward. – 20 to + 20 V.POSITION +: Moves upward. –: Moves downward.
■ Language Setup You can select the language for monitor display. Note: If the power is shut down during setup, the setting values will not be saved. 1. Press the MENU button. The top menu will be displayed. 5. To return to the top menu, move the cursor to EXIT by pressing the C or D button. Then, press the MENU button. 6. After returning to the top menu, move the cursor to EXIT by pressing the C or D button. Then, press the MENU button. The monitor display return to the default status.
TROUBLESHOOTING Check the following before requesting repair. If a trouble cannot be corrected even after checking and trying remedy, contact your dealer. Symptom Power is not turned on. Cause/solution Reference pages Check if the power plug is properly connected to the AC outlet. – Check if the DC plug of AC adapter is properly inserted into the DC IN jack of this monitor. – Check if the power cord is properly inserted into the AC adapter.
SPECIFICATIONS ■ Video Monitor Power Source: Power Consumption: Display Panel: Display Area: Resolution: Aspect Ratio: Brightness: Contrast Ratio: Display Colors: Viewing Angle (L-R/U-D): TV Mode: Horizontal Resolution: Video Input (VIDEO-A IN, VIDEO-B IN): Video Output (VIDEO-A OUT, VIDEO-B OUT): S-video Input (S-VIDEO IN): PC Input (PC IN): 12 V DC, 4.
86 40 INPUT SELECT 403 15° 1500 500 Video Monitor WV-LD MENU SELECT AUDIO 265 15° INPUT SELECT 236 Video Monitor WV-LD MENU SELECT AUDIO 453 5° 325 375 370 5° 30 490 86 40 27 2000 265 WV-LD1500 236 WV-LD2000 (Unit: mm) ■ AC Adapter Power Source: Output voltage: Output current capacity: Dimensions: Weight: 100 V AC to 240 V AC, 50/60 Hz 12 V DC 4.58 A 120 mm (W) x 60 mm (H) x 35 mm (D) {4-7/10" (W) x 2-2/5" (H) x 1-2/5" (D)} (excluding the DC cable) 0.35 kg {0.77 lbs.
Panasonic System Solutions Company, Unit Company of Panasonic Corporation of North America Security Systems www.panasonic.com/security For customer support, call 1.877.733.3689 Executive Office: Three Panasonic Way 2H-2, Secaucus, New Jersey 07094 Zone Office Eastern: Three Panasonic Way, Secaucus, New Jersey 07094 Central: 1707 N. Randal Road, Elgin, IL 60123 Southern: 1225 Northbrook Parkway, Suwanee, GA 30024 Western: 6550 Katella Ave., Cypress, CA 90630 © 2005 Matsushita Electric Industrial Co., Ltd.
