Installation Guide Color CCTV Camera Model No: WV-CP310, WV-CP314 WV-CP300, WV-CP304 This illustration represents WV-CP300. Lens: Option Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. The model number is abbreviated in some descriptions in this manual.
WARNING: • To prevent fire or electric shock hazard, do not expose this apparatus to rain or moisture. • The apparatus should not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, should be placed on the apparatus. • All work related to the installation of this product should be made by qualified service personnel or system installers.
Contents Important safety instructions............................................................................................................ 4 Limitation of liability.......................................................................................................................... 5 Disclaimer of warranty..................................................................................................................... 5 Preface..................................................................
Important safety instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Limitation of liability THIS PUBLICATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF THE THIRD PARTY'S RIGHT. THIS PUBLICATION COULD INCLUDE TECHNICAL INACCURACIES OR TYPOGRAPHICAL ERRORS. CHANGES ARE ADDED TO THE INFORMATION HEREIN, AT ANY TIME, FOR THE IMPROVEMENTS OF THIS PUBLICATION AND/OR THE CORRESPONDING PRODUCT (S).
Preface This product is a 1/3-type CCD color CCTV camera. Connection of this product to a video monitor allows users to use this product as a monitoring camera.
Note: • The VMD function is not the dedicated function to prevent thefts, fires, etc. We are not responsible for any accidents or damages caused by applying the function for the above purposes. About the user manuals The operating instructions of the camera consist of 2 sets: this book and operating instructions (PDF). This book explains how to install the camera. Refer to the "Operating Instructions (PDF)"on the provided CD-ROM for descriptions of how to perform the unit settings.
Precautions Refer installation work to the dealer. Installation work requires technique and experiences. Otherwise injury or damage to this product may result. Be sure to consult the dealer. Do not insert any foreign objects. This could permanetly damage this product. Turn the power off immediately and contact qualified service personnel for service. Do not attempt to disassemble or modify this product. Failure to observe this may cause fire or electric shock.
[Precautions for use] This product is designed to be used indoors. This product is not operable outdoors. This product has no power switch. When turning off the power, turn off a circuit breaker. Do not aim this product at strong light sources. A light source such as a spot light causes a blooming (light bleeding) or a smear (vertical lines).
Precautions for installation Panasonic assumes no responsibility for injuries or property damage resulting from failures arising out of improper installation or operation inconsistent with this documentation. This product is designed to be used indoors. This product is not operable outdoors. Do not expose the product to direct sunlight for hours and do not install the product near a heater or an air conditioner. Otherwise, it may cause deformation, discoloration and malfunction.
Locally procure the screws Screws are not supplied with this product. Prepare the screws according to the material, structure, strength and other factors of the mounting area and the total weight of objects to be mounted. Screw tightening • The screws and bolts must be tightened with an appropriate tightening torque according to the material and strength of the installation area. • Do not use an impact driver. Failure to observe this may cause overtightening and consequently damage to the screws.
Major operating controls and their functions (Side view) (Bottom view) SET UP 5 7 4 (Rear view) 2 2 24V~IN 2-N 6 1 120V~60Hz 12V VIDEO OUT 3 1 AC power input terminal [120 V~ 60 Hz] Connect with the supplied power cord. 2 Video output connector [VIDEO OUT] Provides video output to system units. 3 Tripod mount base This is used to install the camera onto the mount bracket (Iocally procured).
Installation and connection Important: • Follow the installation and connection procedure below to ensure safety. 1 Rotate the lens (option) clockwise slowly to mount the lens. Important: • CS-mount lens can be used on this camera. For use of C-mount lens, use the C-mount adaptor (option). • For prevention of damage to the camera body, use a lens with protrusion of 5.5 mm or less from the flange surface. Protrusion from mount: φ20 mm {25/32 inches} or less Protrusion from flange: 5.
3 Installation of safety wire The following example shows the installation of safety wire: Important: • Be sure to install safety wire between the camera and the installation position to prevent unexpected injury caused by fallen camera. • Ensure that the safety wire is installed. Consult the dealer about installation. Attach the safety wire lug (accessory) to the screw hole of the mount base with screw (accessory). 1 Loosen one screw in the front portion of the camera upper case.
4 Installation of camera mount bracket (locally procured) Secure the camera mount bracket (locally procured) to the installation position, and mount the camera on the camera mount bracket. Prepare mounting screws according to the material of the area where the camera mount bracket (locally procured) is to be installed. The installation method may be different depending on the material of the area where the bracket is to be installed. • When installing on steel: Fix with bolts and nuts (M6 or M8).
5 Mount the camera on the camera mount bracket Follow the instruction of camera mount bracket to mount the camera on the camera mount bracket, and aware of the followings: • Be sure to install the tripod mount base and safety wire before attaching the camera to the camera mount bracket. • Change the tripod mount base position when attaching the camera to the ceiling mount bracket. Observe the following precautions at this time.
6 Attach safety wire (accessory) to the ceiling or wall. Attach the safety wire to the foundation or other parts of the building with sufficient strength (minimum pull-out strength 196 N {44.06 lbf}). Prepare screws according to the condition of the attachment position. Use the safety wire (accessory), washer (accessory) and spring washer (accessory). Recommended screw M4, minimum pull-outstrength 196 N {44.
7 Connect the video output Important: • Be sure to turn off the power of each device before connecting. • Be sure to secure the coaxial cable connectors. Connect a coaxial cable (locally procured) to the video output connector. Coaxial cable To video input 120V~60Hz VIDEO OUT h Use a cable tie (locally procured) to attach the coaxial cable to the camera mount bracket.
9 Turn on the power. WV-CP300, WV-CP310 Use the power cord (accessory) to connect the power supply. Important: • The included power cord is the dedicated power cord of this product. Do not use it with other devices. Power cord (accessory) 120 V AC, 60 Hz 120V~60Hz VIDEO OUT WV-CP304, WV-CP314 Caution: • ONLY CONNECT WV-CP304, WV-CP314 TO 24V AC OR 12V DC CLASS 2 POWER SUPPLY.
3 Tighten the screw of the power cord plug. 4 Connect the power cord plug to the power supply terminal on the rear side of the camera. Important: • Make sure that the power cord plug is inserted fully into the power supply terminal. Cable length and wire gauge 24 V AC The recommended cable length and wire gauge are shown in the table for reference. The voltage supplied to the power terminals of the camera should be within 19.5 V AC and 28 V AC.
j Adjust the camera angle by loosening the screw of the camera mount bracket while viewing the video monitor. Be sure to loosen the screw of the camera mount bracket when the camera angle is adjusted. If the camera angle is changed when the screw is tight, excessive force is applied to the camera mount bracket and camera, and accordingly they may be damaged. Be sure to tighten the screw securely after camera angle adjustment. Adjust the focus.
Important: • If the view angle changes during adjustment, press the [SET] button to close the "FOCUS ADJUSTMENT" screen (once the view angle changes, the "PEAK HOLD" and "INDICATOR" values will also change), and repeat from step 3 after the view angle is fixed. • When shooting in the following place or following subjects, press the [SET] button again to close the "FOCUS ADJUSTMENT" screen. Adjust to the best focus position while viewing the image.
Setup menu Performing each setting item in the setup menu should be completed in advance to use this unit. Perform the settings for each item in accordance with the installation conditions and customer requirements. List of setup menu Setup item Description CAMERA ID This item specifies the camera title. The camera title that indicates the camera location and other information about the camera is created with alphanumeric characters and symbol, and then displayed on the screen.
Basic operation The operations in the setup menu are performed with the operation buttons after calling up the setup menu on the connected video monitor. The description below explains how to operate the setup menu basically. Screenshots of WV-CP310 are shown as an example. Screenshot 1 Hold down the [SET] button for about 2 seconds to call up the top screen of the setup menu.
Screenshot 3 The selected setup screen in the setup menu appears on the screen. **CAMERA SETUP** SCENE1 ALC/ELC ALC SHUTTER OFF AGC ON(HIGH) SENS UP OFF WHITE BAL ATW1 DNR HIGH D&R(IR) AUTO1 OFF VMD RET TOP END Step 4 Perform the settings for each item. • Selection of setting item: Press the [UP] button or [DOWN] button to move the cursor. • Change of settings: Press the [RIGHT] button or [LEFT] button.
Screen transition diagram Top screen MODEL WV-CP310 SERIES CAMERA ID OFF CAMERA SYSTEM SPECIAL LANGUAGE CP310 CP310 CP300 “CAMERA ID” screen **CAMERA ID** 0123456789 ABCDEFGHIJKLM NOPQRSTUVWXYZ ().,'":;&#!?= +-*/%$ SPACE POSI RET TOP END RESET END SETUP DISABLE ................
CP310 CP310 Screen transition diagram CP300 Top screen “CAMERA ID” screen MODEL WV-CP300 SERIES CAMERA ID OFF CAMERA SYSTEM SPECIAL LANGUAGE **CAMERA ID** 0123456789 ABCDEFGHIJKLM NOPQRSTUVWXYZ ().,'":;&#!?= +-*/%$ SPACE POSI RET TOP END RESET END SETUP DISABLE ................
Troubleshooting Before asking for repairs, confirm the causes with the following table. Contact your dealer if a problem cannot be solved even after checking and trying the solution in the table or a problem is not described below. Symptom No image displayed Blurred image Cause/solution Reference page • Are the power cord and coaxial cable connected appropriately? → Check whether the connection is appropriately established.
Specifications General WV-CP310 WV-CP300 WV-CP314 WV-CP304 120 V AC 60 Hz 24 V AC 60 Hz, 12 V DC 1.9 W 24 V AC: 2.3 W, 12 V DC: 210 mA 1/3-type interline transfer CCD 976 (H) × 494 (V) 4.8 mm (H) × 3.6 mm (V) {3/16 inches (H) × 5/32 inches (V)} 2:1 interlace 525 lines 15.734 kHz 59.94 Hz Internal (INT), multiplexed vertical drive (VD2) 650 TV lines 350 TV lines 1.0 V [p-p] NTSC composite video signal 75 Ω 52 dB (AGC OFF) 0.08 lx (color mode) 0.008 lx 0.05 lx 0.008 lx 0.
Video motion detection Number of scene file Privacy zone Image stabilizer Electronic zoom Upside-down Lens distortion correction WV-CP310 WV-CP300 WV-CP314 OFF/MOTION DETECTION/SCENE CHANGE 2 ON (1)/ON (2)/OFF ON/OFF ON (up to 2x)/OFF ON/OFF 0 to 255 WV-CP304 ※ Values of weight and dimensions are approximate. The specification is subject to change without notice. Standard accessories CD-ROM*. ....................................................................1 pc. Installation Guide (this book)........
Panasonic System Communications Company of North America, Unit of Panasonic Corporation of North America www.panasonic.com/business/ For customer support, call 1.800.528.6747 Three Panasonic Way, Secaucus, New Jersey 07094 U.S.A. Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 Canada (905)624-5010 www.panasonic.ca © Panasonic System Networks Co., Ltd.
