Colour CCTV Camera WV-CP120E (Lens : option) Before attempting to connect or operate this product, please read these instructions completely.
ENGLISH VERSION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK), NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is interned to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
PREFACE..................................................................... 2 FEATURES................................................................... 2 PRECAUTIONS............................................................ 3 MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS ..................................................... 4 CAMERA SETUP.......................................................... 7 CONNECTIONS........................................................... 8 LENSES ...........................
PREFACE FEATURES The Panasonic WV-CP120 offers a new low end colour camera through the use of a 1/3 inch interline transfer CCD image sensor. A single coaxial cable connects the camera and specified monitor or camera drive unit, and carries four signals, audio, video, DC power and vertical drive pulses. This simple system is specially designed for surveillance and security needs at offices, factories, schools, hospitals, public or residential buildings, etc. • Minimum illumination of 0.5 lx at F0.
PRECAUTIONS • Do not attempt to disassemble the camera. To prevent electric shock, do not remove screws or cover. There are no user-serviceable parts inside. Call a qualified service person for repairs. • Never direct the camera toward the sun. Whether the camera is in use or not, never direct it toward the sun. Do use caution when operating the camera in the vicinity of spotlights or other bright lights and light reflecting objects. • Handle the camera with care. Do not abuse the camera.
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS ATW BALANCE VIDEO LEVEL H R L POWER B VOLUME MIN MAX ALC SOFT OFF OFF ALC SOFT OFF OFF -4- ELC SHARP BLC ON MIC ON ELC SHARP BLC ON MIC ON
q Lens (Option) See pages 9, 10, 11, 12 and 13 for details on lens selection. A standard C-mount lens can be used with the camera by adding the optional lens mount converter (C-mount adapter) WV-AD20. u Video level Control (VIDEO LEVEL, L/H) This control adjusts the level of auto iris control when the ALC/ELC Switch 1!1 is set to ALC position, or the level of electronic light control when the ALC/ELC switch is set to ELC position.
!2 Detail level Switch (SOFT/SHARP) The detail/aperture level can be chosen by this switch. Choose the desired position while observing the picture on the monitor. Note: Usually choose SHARP position. When a Quad System is connected to this camera, set this switch to SOFT position. ELC (Electronic Light Control) Function In this mode a continuously variable electronic shutter is employed to automatically control the exposure times in the CCD Image Sensor according to the incoming light level. Cautions: 1.
BLC (Backlight Compensation) Function CAMERA SETUP Remove the rear cover fixing screw and pull the rear cover out as shown below. To improve perfomance, select the function switches located on the back. ON OFF When strong, unwanted background lighting interferes with the clarity of important scene objects, turn this switch to “ON” position. Cautions: 1.
CONNECTION Colour Monitor WV-CM143 ALARM CONTROL SPOT MONITOR CONTROL IN Caution: Keep the POWER switch of the specified monitor, Camera Extension Unit and Camera Drive Unit in OFF position while making connections. If the power of these units is ON during connections, the camera does not function due to the built-in protection circuit which protects it against wrong connections.
LENSES 1. Selection of Lens Models Specifications WV-LA2.8 (Wide Angle) WV-LA6A (Wide Angle) WV-LA18 (Telephoto) WV-LA36 (Telephoto) Focal Length 2.8 mm 6 mm 12 mm 18 mm 36 mm Maximum Aperture Ratio 1 : 1.4 1 : 1.4 1 : 1.4 1 : 1.4 1 : 1.8 H V 87.5° 43.5° 22.2° 15.5° 7.7° 69.2° 32.9° 16.7° 11.5° 5.7 Image Size Angular Field of View 1/3” WV-LA12A (Standard) 1/2" (6.4 (H) x 4.8 (V) mm) Focusing Range Mount Filter Size Dimensions Weights 0.27 m - ∞ (0.
Models Specifications Image Size WV-LZ81/10 (Motorized Zoom) WV-LA4R5C3A (Wide Angle) 1/3" (4.8 (H) x 3.6 (V) mm) 8 - 80 mm (10X) 4.5 mm 9 mm 6 - 60 mm (10X) 1 : 1.2 (Wide) 1 : 1.3 (Tele) 1 : 1.4 (Wide) 1 : 1.7 (Tele) 1 : 1.2 1 : 1.2 1 : 1.6 (Wide) 1 : 2.6 (Tele) H Wide : 31.4° Tele : 5.5° Wide : 33.5° Tele : 3.5° 56.4° 29.6° Wide : 43.7° Tele : 4.6° V Wide : 23.5° Tele : 4.1° Wide : 25.2° Tele :2.6° 43.3° 22.2° Wide : 33.0° Tele : 3.5° 1m - ∞ (3.3 ft - ∞) 1.
Models Specifications WV-LA4510 (Wide Angle) Image Size WV-LA608 (Wide Angle) WV-LA1208 (Standard) WV-LZ83/6 (Motorized Zoom) 1/2" (6.4 (H) x 4.8 (V) mm) Focal Length 4.5 mm 6 mm 12 mm 8.5 - 51 mm (6X) Maximum Aperture 1 : 1.0 1 : 0.75 1 : 0.8 1 : 0.8 (Wide) 1 : 1.0 (Tele) H 56.9° 43.8° 23.8° Tele : 5.5° Wide : 31.3° V 43.6° 33.1° 17.6° Wide : 23.4° Tele : 4.1° Angular Field of View 1/3” Focusing Range Mount Filter Size Dimensions Weights 1.2 m - ∞ (4.
Models Specifications WV-LA210C3 (Wide Angle) Image Size WV-LA408C3 (Wide Angle) WV-LA908C3 (Standard) WV-LZ62/2 (Variable focal) 1/3" (4.8 (H) x 3.6 (V) mm) Focal Length 2.1 mm 4.5 mm 9 mm 3.5 - 8 mm (2X) Maximum Aperture Ratio 1 : 1.0 1 : 0.75 1 : 0.75 1 : 1.4 (Wide) 1 : 2.0 (Tele) H 107.6° 57.2° 31.3° Wide : 75.3° Tele : 35.1° V 88.0° 43.7° 23.5° Wide : 57.0° Tele : 26.4° Angular Field of View 1/3" Focusing Range Mount Filter Size Dimensions Weights 0.
Models Specifications WV-LM4R5A (Wide Angle) Image Size WV-LF6 (Wide Angle) WV-LF12 (Standard) 1/2" (6.4 (H) x 4.8 (V) mm) WV-LF4R5C3A (Wide Angle) WV-LF9C3A (Standard) 1/3" (4.8 (H) x 3.6 (V) mm) Focal Length 4.5 mm 6 mm 12 mm 4.5 mm 9 mm Maximum Aperture Ratio 1 : 1.4 1 : 1.4 1 : 1.4 1 : 1.2 1 : 1.2 56.9° 43.5° 22.2° 56.4° 29.6° Angular Field of View 1/3” H V Iris 43.6° 32.9° 16.7° 43.3° 22.
For lenses other than those listed on pages 9, 10, 11, 12 and 13, use a C-mount or CS-mount and make sure that the lens weight is less than 450g (0.99 lbs.). If not, both the lens and camera should be secured. The protrusion of the rear of the lens should be as shown below. 2. Mounting the Lens Caution: Always turn the Flange-back Adjusting Ring clockwise by loosening the screws on the ring before mounting the lens. Otherwise the inner glass and CCD image sensor could be damaged by the lens.
FLANGE-BACK ADJUSTMENT INSTALLATION OF CAMERA 1. Loosen the screws on the Flange-back Adjusting Ring. The mounting bracket can be fixed either on the top or bottom cover of the camera. • Mounting from the top Remove the mount adapter from the bottom of the camera as shown. The hole is for the standard photographic pan-head screw size (1/4” - 20). Make sure that two original screws are used when mounting the mount adapter; longer type screws may damage the inner components.
• Installation on the wall • Installation on the ceiling • Installation on a shelf or stand VIDEO OUT VIDEO OUT A B VIDEO OUT VIDEO OUT Fig. A, B Fig. C INSTALLING PROCEDURE Fig. D Coaxial Cable The explanation is for Fig. A, but applies equally to Figs, B, C and D. Fixing Screw 1. Install the camera mounting bracket on the wall with 2 screws. Note: The coaxial cable can be passed through the centre hole of the camera mounting bracket.
2. Insert the camera fixing screw into the camera mounting hole and tighten the screw firmly. 3. Connect the camera and monitor with the coaxial cable and turn on the power switch of the monitor. 4. While viewing the monitor picture, loosen the angular control screw slightly. Adjust the camera’s angle to the desired position, and then tighten the screw firmly. Unit: mm (inch) 90° φ120 (φ4-3/4) 164 (6-7/16) 83.5 (3-5/16) 6.
PREVENTION OF BLOOMING AND SMEAR When the camera is faced toward spotlights or other bright lights and light reflecting objects, smear or blooming may appear. Therefore, the camera should be operated carefully in the vicinity of extremely bright objects to avoid smear or blooming.
SPECIFICATIONS Pick-up Device: Scanning Area: Synchronization: Scanning System: Scanning: Horizontal: Vertical: Horizontal Resolution: Video Output: Signal-to-Noise Ratio: Electronic Light Control: Minimum Illumination: Gain Control: White Balance: Detail: BLC: Audio: Lens Mount: Ambient Operating Temperature: Ambient Operating Humidity: Power Source: Interline Transfer CCD, 512 (H) x 582 (V) pixels. 4.8 (H) x 3.
Dimensions (without lens): Weights (without lens): 71 (W) x 65 (H) x 125.5 (D) mm [2-13/16” (W) x 2-9/16” (H) x 4-15/16” (D)] 440g (0.97 lbs.) Weights and dimensions indicated are approximate. Specifications are subject to change without notice. STANDARD ACCESSORIES Body Cap ...............................................................1 pc. Camera Mounting Bracket .....................................1 pc. OPTIONAL ACCESSORIES Lenses : WV-LA2.
Matsushita Electric Industrial Co., Ltd. Central P.O.
