User Guide

-11-
4. Sequential Time Adjustment
(SEQ TIME ADJ)
** SET UP MENU **
CAMERA ID 1 2 3 4
1 CAMERA
AUDIO SELECT SEQ
TIMING SELECT INT
SEQ TIME ADJ 1 SEC
ALARM BUZZER ON
ALARM TIME ADJ 60 SEC
AUTO RESET ON
BRIGHT COMP 1 2 3 4
END SET UP DISABLE
** SET UP MENU **
CAMERA ID 1 2 3 4
1 CAMERA
AUDIO SELECT SEQ
TIMING SELECT INT
SEQ TIME ADJ 1 SEC
ALARM BUZZER ON
ALARM TIME ADJ 60 SEC
AUTO RESET ON
BRIGHT COMP 1 2 3 4
END SET UP DISABLE
4-1. Move the cursor to the SEQ TIME ADJ.
4-2. Select the sequential time by using the Left (A)(17) or
Right (B)(18) Switch.
Sequential time can be selected from approx. 1, 2, 3,
4, 5, 6, 7, 8, 9, 10, 15, 20, 25 or 30 sec.
5. Alarm Sound On/Off (ALARM BUZZER)
5-1 Move the cursor to the ALARM BUZZER.
5-2. Alarm Sound On/Off mode can be selected by using
the Left (A)(17) or Right (B)(18) Switch.
This monitor sounds the alarm for the preset time when
an alarm signal is received.
6. Alarm Time Adjustment
(ALARM TIME ADJ)
** SET UP MENU **
CAMERA ID 1 2 3 4
1 CAMERA
AUDIO SELECT SEQ
TIMING SELECT INT
SEQ TIME ADJ 1 SEC
ALARM BUZZER ON
ALARM TIME ADJ 60 SEC
AUTO RESET ON
BRIGHT COMP 1 2 3 4
END SET UP DISABLE
6-1. Move the cursor to the ALARM TIME ADJ.
6-2. Set the time duration of the alarm buzzer by using the
Left (A)(17) or Right (B)(18) Switch.
Alarm buzzer can be selected from approx. 1, 5, 10,
20, 30, 40, 50 or 60 sec.
7. Auto Reset Setting (AUTO RESET)
** SET UP MENU **
CAMERA ID 1 2 3 4
1 CAMERA
AUDIO SELECT SEQ
TIMING SELECT INT
SEQ TIME ADJ 1 SEC
ALARM BUZZER ON
ALARM TIME ADJ 60 SEC
AUTO RESET ON
BRIGHT COMP 1 2 3 4
END SET UP DISABLE
7-1. Move the cursor to AUTO RESET.
7-2. Auto Reset On/Off mode can be selected by using the
Left (A)(17) or Right (B)(18) Switch.
The alarm mode will be reset automatically at 60 sec.
after the sensor signal is received.
8. Bright Compensation Setting
(BRIGHT COMP)
8-1. Move the cursor to the “BRIGHT COMP”.
8-2. The desired camera can be selected by using the Left
(A)(17) or Right (B)(18) Switch.
8-3. Bright Compensation On/Off mode can be selected by
using the Set Up Switch.In the sequential mode, this
function can give the suitable condition to the picture
1234
1234
"BRIGH COMP" ON OFF OFF ON
** SET UP MENU **
CAMERA ID 1 2 3 4
1 CAMERA
AUDIO SELECT SEQ
TIMING SELECT INT
SEQ TIME ADJ 1 SEC
ALARM BUZZER ON
ALARM TIME ADJ 60 SEC
AUTO RESET ON
BRIGHT COMP 1 . . 4
END SET UP DISABLE
Caution:
This function only works on the screen in the
sequential mode.
The video signal can not be supplied from Video
Output Connector (26).
When observing the playback picture, picture
adjustment should be made by using the Bright
(8) or Contrast (10) Control on the front panel.