Operating Instructions WV-CM1020 POWER ON OFF INPUT A B MENU –AUDIO+ Video Monit or WV-CM Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. ESPAÑOL FRANÇAIS DEUTSCH Model No.
ENGLISH VERSION We declare under our sole responsibility that the product to which this declaration relates is in conformity with the standards or other normative documents following the provisions of Directives EEC/73/23 and EEC/89/336. Vi deklarerar härmed värt fulla ansvar för att den produkt till vilken denna deklaration hänvisar är i överensstämmelse med standarddokument, eller andra normativa dokument som framställs i EEC-direktiv nr. 73/23 och 89/336.
PREFACE ........................................................................................................................................................................................ 4 FEATURES ...................................................................................................................................................................................... 4 PRECAUTIONS ...............................................................................................................
PREFACE The Panasonic‘s Video Monitor WV-CM1020 produces sharp colour pictures and audio output. FEATURES • Approx. 223 mm (8-3/4” inches) actual diagonal visual size. • Automatic frequency control activated from setup menu. • A or B channel selectable for input and output signals. • Looped through RCA connectors for audio input and output. • Looped through BNC connectors for video inputs and outputs. • Maximum 0.5 W speaker output. • Operations controlled by moving the cursor in the setup menu.
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS FOCUS VIDEO B IN VIDEO A IN AUDIO IN AC IN POWER ON OFF Video Monitor WV-CM INPUT A MENU –AUDIO+ B OUT q we r t y q Power Switch (POWER, ON/OFF) This is a push-push type switch which turns the power of this monitor on and off. Press once (switch remains down (;)) to turn on the power of the monitor. Press again (switch comes up (l)) to turn off the power of the monitor. Note: There may be a delay of several seconds until the monitor display comes on.
!1 Video A input Connector (VIDEO A IN) For input of the PAL composite video signal from an outboard device. !4 Video B output Connector (VIDEO B OUT) The video input signal connected to the video input connector !3 is looped through to this connector and terminated automatically. !2 Video A output Connector (VIDEO A OUT) The video input signal connected to the video input connector !1 is looped through to this connector and terminated automatically.
SYSTEM CONNECTION ■ Single Monitor Connection • Monitoring the Playback picture Connect the Video Input terminal A or B of the monitor to the Video Output Connector of the VTR with a 75ohm coaxial cable. ● Connecting Cameras Camera • Monitoring the sound Connect the Audio Out Terminal of VTR to the Audio Input Connector of the monitor. VIDEO OUT ● Multiple Monitor Connection Camera VIDEO OUT FOCUS VIDEO B IN VIDEO A IN AUDIO IN AC IN OUT OUT Monitor (1) OUT Camera VIDEO OUT 1.
ADVANCED CONTROL OPERATION ■ Displaying the Setup Menu 1. Press the power switch once (switch remains down (;)) to turn on the power of the monitor. 2. Power Indicator is on. 3. Select the input channel by pressing the input signal select switch. Press the MENU button to open the setup menu. It will close automatically if no operation takes place within about 3 seconds. BRIGHT CONTRAST PICTURE COLOUR AFC 0 0 0 0 SHORT LANGUAGE ENGLISH NORMAL SETTINGS ■ Adjustment 4.
7. To reset the monitor to the default settings, move the cursor to NORMAL SETTINGS by pressing the (D) or (C) button. Then press the (–) or (+) button to restore the factory default settings. BRIGHT CONTRAST PICTURE COLOUR AFC -12 +8 -16 -6 LONG LANGUAGE ENGLISH NORMAL SETTINGS – or + BRIGHT CONTRAST PICTURE COLOUR AFC 0 0 0 0 SHORT LANGUAGE ENGLISH NORMAL SETTINGS 8. To exit the setup display, press the Menu button or wait for about 3 seconds until it closes automatically.
Matsushita Electric Industrial Co., Ltd. Central P.O.
