CCTV Cameras WV-BP120/WV-BP124 WV-BP120 (Lens : option) WV-BP124 Before attempting to connect or operate this product, please read these instructions completely.
For U.K. ENGLISH VERSION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK), NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is interned to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
We declare under our sole responsibility that the product to which this declaration relates is in conformity with the standards or other normative documents following the provisions of Directive EEC/89/336. The wires in this mains lead are coloured in accordance with the following code. Green-and-yellow: Earth Blue: Neutral Brown: Live As the colours of the wire in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows.
CONTENTS PREFACE ...................................................................................................................................................................... 3 FEATURES .................................................................................................................................................................... 3 PRECAUTIONS ..........................................................................................................................................
PREFACE FEATURES Panasonic's WV-BP120 series cameras introduce a new level of high picture quality through the use of a 1/3 inch interline transfer CCD having 512 horizontal pixels (picture elements). High performance-to-cost ratio is achieved through the use of newly developed Sync IC's and ability to shoot indoor scenes with a fixed iris lens by use of Electronic Light Control (ELC) function. • Minimum illumination of 0.15 lx at F1.
PRECAUTIONS • Do not attempt to disassemble the camera. To prevent electric shock, do not remove screws or cover. There are no user-serviceable parts inside. Refer servicing to qualified service personnel. • Never face the camera toward the sun. Whether the camera is in use or not, never face it toward the sun. Do use caution when operating the camera in the vicinity of spot lights or other bright lights and light reflecting objects. • Handle the camera with care. Do not abuse the camera.
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS WV- ALC BP120 ELC DC VIDEO (5) (4) (3) (6) (2) (1) (8) AC 24V IN GND 1 VIDEO OUT 2 VIDEO OUT (7) (7) WV-BP120 WV-BP124 -5-
A 4-pin male connector, which can be mated with the camera's female connector, is supplied as a standard accessory (Part No. YFE4191J100). This male connector can be installed on lenses which have incompatible type connector. See page 14 for installation details. (1) Lens (Option) See pages 10, 11, 12 and 13 for details on lens selection. (2) Flange-back Adjusting Ring This ring is used to adjust the back focal length or picture focus by rotating this ring to clockwise.
ELC (Electronic Light Control) In this mode a continuously variable electronic shutter is employed to automatically control exposure times in the CCD Image Sensor, according to the incoming light level. With this mode selected, fixed or manual iris lens can be used instead of an ALC type lens. Cautions: 1. Under bright conditions such as outdoors, use an ALC type lens as the ELC control range is not wide enough under these conditions. 2.
Video Cable CONNECTIONS 1. It is recommended to use a video monitor whose resolution is at least equal to the camera’s. 2. Terminate the camera output with 75Ω resistor at the furthest end of its cable run. • It is recommended to use 75Ω coaxial cable. • Always set the last monitor’s termination switch to 75Ω, and set the termination switches of intermediate monitors to high impedance (Hi-Z) position. Power Source ■ WV-BP120 Connect the AC Power Cord to a electrical outlet of 220V - 240V AC 50 Hz.
Table 1 Type of coaxial cable Recommended maximum cable length RG-59/U (3C-2V) RG-6U (5C-2V) RG-11/U (7C-2V) RG-15/U (10C-2V) (m) 250 500 600 800 (ft) 825 1,650 1,980 2,640 3. Wiring precautions: • Do not bend coaxial cable into a curve whose radius is smaller than 10 times the cables diameter. • Never staple the cable-not even with circular staples. Mismatching will occur. • Never crush or pinch the cable. All of these will change the impedance of the cable and cause poor picture quality.
LENSES 1. Selection of Lens Models Specifications WV-LA2.8 (Wide Angle) WV-LA6B2 (Wide Angle) Image Size WV-LA12B2 (Standard) WV-LA18 (Telephoto) WV-LA36 (Telephoto) 1/2" (6.4 (H) x 4.8 (V) mm) Focal Length 2.8 mm 6 mm 12 mm 18 mm 36 mm Maximum Aperture Ratio 1 : 1.4 1 : 1.4 1 : 1.4 1 : 1.4 1 : 1.8 H 107.0° [87.5°] 56.8° [43.5°] 30.4° [22.8°] 20.4° [15.5°] 10.2° [7.7°] V 88.0° [69.2°] 43.5° [33.0°] 22.8° [17.1°] 15.2° [11.5°] 7.7° [5.7°] 0.27 m - ∞ 0.
Models Specifications Image Size WV-LZ81/10 (Motorized Zoom) 1/3" (4.8 (H) x 3.6 (V) mm) 8 - 80 mm (10X) 4.5 mm 9 mm 6 - 60 mm (10X) 1 : 1.4 (Wide) 1 : 1.7 (Tele) 1 : 1.2 1 : 1.2 1 : 1.6 (Wide) 1 : 2.6 (Tele) H Wide : 41.9° [31.4°] Tele : 7.2° [5.5°] Wide : 44.6° [33.5°] Tele : 4.6° [3.5°] 56.4° 29.6° Wide : 43.7° Tele : 4.6° V Wide : 31.3 [23.5°] Tele : 5.5° [4.1°] Wide : 33.5° [25.2°] Tele : 3.5° [2.6°] 43.3° 22.2° Wide : 33.0° Tele : 3.5° 1m-∞ 3.3 ft - ∞ 1.
Models Specifications WV-LA4510 (Wide Angle) Image Size WV-LA608 (Wide Angle) WV-LA1208 (Standard) WV-LZ83/6 (Motorized Zoom) 1/2" (6.4 (H) x 4.8 (V) mm) Focal Length 4.5 mm 6 mm 12 mm 8.5 - 51 mm (6X) Maximum Aperture 1 : 1.0 1 : 0.75 1 : 0.8 1 : 0.8 (Wide) 1 : 1.0 (Tele) H 73.2° [56.9°] 57.5° [43.8°] 31.7° [23.8°] Wide : 41.6° [31.3°] Tele : 7.2° [5.5°] V 56.9° [43.6°] 43.9° [33.1°] 23.6° [17.6°] Wide : 31.3° [23.4°] Tele : 5.4° [4.
Models Specifications WV-LM4R5A (Wide Angle) Image Size WV-LM6B2 (Wide Angle) WV-LM12B2 (Standard) WV-LF4R5C3A (Wide Angle) 1/2" (6.4 (H) x 4.8 (V) mm) WV-LF9C3A (Standard) 1/3" (4.8 (H) x 3.6 (V) mm) Focal Length 4.5 mm 6 mm 12 mm 4.5 mm 9 mm Maximum Aperture Ratio 1 : 1.4 1 : 1.4 1 : 1.4 1 : 1.2 1 : 1.2 H 72.6° [56.9°] 56.8° [43.5°] 30.4° [22.8°] 56.4° 29.6° V 56.7° [43.6°] 43.5° [33.0°] 22.8° [17.1°] 43.3° 22.
(3) Put the heat shrinkable tubes or equivalent tubes on the inner cables of the iris control cable. (4) Solder the inner cable of the iris control cable at the pin-plug block according to the following pin assignment and cover the heat shrinkable tubes or equivalent tubes over the soldered area and heat on the tubes to shrink them. Pin 1 : Power source : +9V DC, 50mA Max. Pin 2 : Not used Pin 3 : Video signal : 0.
(5) Both the connector cover and connector should be positioned to interlock. Note: Cut off the rib on the connector, when the iris control cable is too thick and the connector cover and connector can not be interlocked. Connector Cover Heat Shrinkable Tubes C-mount : Less than 11.5 mm (7/16") CS-mount : Less than 7.
DC: FOCUS OR FLANGE-BACK ADJUSTMENT The mounted lens is one of the lenses listed on pages 10, 11 and 12 or one that requires the DC control signal for auto iris control. VIDEO: The mounted lens requires video signal for auto iris control. Note: Refer to item on page 6 for the lens selection switch. The following adjustment should be made by qualified service personnel or system installers. 1. Loosen screws on the flange-back adjusting ring.
INSTALLATION OF CAMERA PREVENTION OF BLOOMING AND SMEAR • Mounting from the bottom This camera is originally designed to be mounted from the bottom as shown. The hole is the standard photographic pan-head screw size (1/4" 20). • Mounting from the top Remove the mount adaptor from the bottom of the camera by removing two fixing screws. Attach the mount adaptor to the top as shown in the diagram, then mount the camera on the mounting bracket.
SPECIFICATIONS Pick-up Device: Scanning Area: Synchronization: Scanning System: Scanning: Horizontal: Vertical: Horizontal Resolution: Video Output: Signal-to-Noise Ratio: Automatic Light compensation: Electronic Light Control: Minimum Illumination: Lens Mount: Ambient Operating Temperature: Ambient Operating Humidity: Power Source: Power Consumption: Dimensions (without lens): Weights (without lens): 512 (H) x 582 (V) pixels. Interline Transfer CCD 4.8 (H) x 3.
STANDARD ACCESSORIES ALC Lens Connector (YFE4191J100) ................... 1 pc. Body Cap .............................................................. 1 pc. OPTIONAL ACCESSORIES Lenses : WV-LA2.
Matsushita Electric Industrial Co., Ltd. Central P.O.
