Operating Instructions
Table Of Contents
- Preface
- Before using this product
- Use an SD memory card
- Operation window
- Basic operation
- Login operation at startup
- Monitor live images
- Record images
- Play recorded images
- Play images from a designated point
- Search and play
- Play back copied images
- Event function
- Copy recorded images
- About the face matching function
- Operate the camera
- Configure the network settings
- Network security of the recorder
- Display the operation window
- About the operation window
- Monitor live images from cameras
- Play recorded images
- Play image recorded at a designated date & time
- Search and play recording events (REC event search)
- Motion detection search and playback (VMD search)
- Check a list of copied recorded images
- Event function
- Copy recorded images
- Download recorded images currently being played
- Play the copied/downloaded recorded images
- Operate the camera
- Setup
- Notification by e-mail
- Troubleshooting
- Glossary

94
95
Notification by e-mail
Alarm mail
The following mail will be sent to notify of an alarm occurrence to a registered address when the alarm occurs.
Contents of the alarm mail (example)
In NV200 (192.168.0.250), alarm was occurred.
Alarm date : Jan-01-2010 12:00:00 GMT-5:00
Cause of alarm : COMMAND ALARM 5CH
URL : http://192.168.0.250/
Warning mail
The following mail will be sent to notify of a trouble occurrence to a registered address when the trouble occurs.
Contents of the warning mail (example)
NV200 (192.168.0.250) STATUS REPORT.
Date : Jan-01-2010 12:00:00 GMT-5:00
Status : THERMAL ERROR
Indication Description
Date Date & time when the trouble occurred will be displayed.
Status The description of the trouble will be displayed. xx is the camera number, y is the disk
number and f is the cooling fan number.
Thermal trouble : THERMAL ERROR
Alteration detected : ALTERED xxch
HDD smart warning : HDDy SMART WARNING
HDD hour meter warning : HDDy HOUR METER WARNING
Auto remove of link : HDDy LOGICALLY REMOVED
Cooling fan error : FANf ERROR
NW link error : NETWORK LINK ERROR
NW camera error detection : CAM xx COMMUNICATION ERROR
Network camera error
detection (audio)
: CAM xx COMMUNICATION ERROR(AUDIO)
NW camera error recovery : CAM xx COMMUNICATION RECOVERED
Network camera error
recovery (audio)
: CAM xx COMMUNICATION RECOVERED(AUDIO)
HDD remove error : HDDy SWAP WARNING










