Operating Instructions

90
91
When displaying live images from a camera with the panning/tilting function, the following camera controls are
available. It may be impossible to operate the camera or some functions may be inoperable depending on the
model of the camera.
 • Panning/Tilting:Adjuststhehorizontal/verticalpositionofthecamera.
 • Zoom:Zoomin/outthedisplayedimage.
 • Focus:Adjustthefocalpoint.
 • Brightness:Adjuststhelensirisofthecamera.
 • Presetpositionoperation:Movethecameratothepresetposition(thatisdeterminedonthecamera'ssetup
menu and registered in the recorder).
 • Automode:Activatestheautomodefunctionofthecamera.
To operate the camera, display the [CAM] tab of the top page.
Panning/Tilting
When displaying live images on a 1-screen, moves a camera horizontally/vertically in the following ways.
Control buttons
Click to move (pan/tilt) a camera in the clicked direction.
Control pad
Click to move (pan/tilt) a camera in the clicked direction. Panning/ tilting speed will be faster if a clicked point
gets farther from the center point of the control pad.
Note:
 • Clickthedesiredpointtobelocatedatthecenteroftheangularfieldofview.Thecamerawillmoveto
locate the clicked point as the center point in the image display area.
Zooming
Zooms in/out the displayed image. Depending on the models of the connected cameras, the available zooming
factors may be different. Refer to the operating instructions of the camera for further information.
Zooming can be adjusted by clicking the [–] button (wide) or the [+] button (tele). Click the [x1] button to reset
the zoom factor to x1.
Note:
 • Itispossibletoadjustzoomingbyturningthemousewheel.
 • Whenselectinganareaintheimagedisplayareabydraggingthemouse,theselectedareawillbelocated
at the center of the image display area and the zoom ratio will be adjusted automatically.
Operate the camera
Control buttons/Control pad