Operating Instructions

82
83
[Password]
To copy with password protection, mark the corre-
sponding checkbox and enter a password. (5 to 8
alphanumeric characters) The password will be
required to play back the copied data.
[Data size]
When the [Measurement] button is clicked, size of the
data to be copied will be displayed.
[Free]
The remaining capacity of the destination medium
(SD memory card/DVD disc) will be displayed.
Step 4
Click the [OK] button. The confirmation window will
be displayed. Then, click the [OK] button of the win-
dow.
→ The data copy window will close. Copying will
start and the "COPY" icon will be displayed in the
status display area. When copying is complete,
the "COPY" icon will disappear.
Important:
 • DonotremovetheSDmemorycardduringcopy-
ing on the SD memory card. It may damage data
on the SD memory card.
 • Whenthecopyendtimeissetearlierthanthe
start time, copying will not start even when the
[OK] button is clicked.
 • Whencopymediumlacksenoughstoragespace,
data will be copied until the copy medium is full.
Use a medium with sufficient storage capacity to
avoid left over data that is not copied.
 • Copyingwillbeperformedinthefollowingorder:
Viewer Software → Images → Audio Depending
on the designated time range for copying and the
remaining space of the storage medium, images
and audio may not be copied.
 • Whenclickingthebuttoninthe[Copy]boxduring
copying, the confirmation window for cancellation
of the current copying will be displayed. It is pos-
sible to cancel the current copying on this win-
dow.
 • Donotturnoffthepoweroftherecorderwhile
copy is in progress. If the power is turned off while
copying, the storage media copied on will become
unusable.
 • Whenanotheruseroperatingtherecorderhas
opened the copy panel or when the destination
medium has been selected by another user, the
copy window cannot be displayed.
 • Refertopage9forhowtoejecttheDVDdisc.