Operating Instructions

72
73
Step 1
Click the [Cam. select] button on the top page of the
operation window, and select a camera for playback
from the camera selection box. (☞ Page 63)
Step 2
Click the [HDD] tab. (☞ Page 61)
Step 3
Click the [C] button and determine the date & time of
the desired images.
Step 4
Click the [Date search] button.
→ "Playback" and "Step 1" will be displayed in the
status display area, and playback will start from
the image corresponding to the designated date &
time.
(Playback operation: "Playback downloaded
images" (☞ page 88))
Note:
 • WhenplayingH.264/MPEG-4imagebydesignat-
ing date & time, playback may start from a point
several seconds before or after the designated
date & time.
 • Whennorecordedimagefoundatthedesignated
date & time, playback of images recorded after
and at the closest to the designated date & time
will start.
Play image recorded at a designated date & time
Start playback by designating the desired date & time of a recorded image. Playback operation can be made
while recording.