Operating Instructions
Table Of Contents
- Preface
- Before using this product
- Use an SD memory card
- Operation window
- Basic operation
- Login operation at startup
- Monitor live images
- Record images
- Play recorded images
- Play images from a designated point
- Search and play
- Play back copied images
- Event function
- Copy recorded images
- About the face matching function
- Operate the camera
- Configure the network settings
- Network security of the recorder
- Display the operation window
- About the operation window
- Monitor live images from cameras
- Play recorded images
- Play image recorded at a designated date & time
- Search and play recording events (REC event search)
- Motion detection search and playback (VMD search)
- Check a list of copied recorded images
- Event function
- Copy recorded images
- Download recorded images currently being played
- Play the copied/downloaded recorded images
- Operate the camera
- Setup
- Notification by e-mail
- Troubleshooting
- Glossary
56
57
Step 6
Select [Use the following IP address] and set "IP
address" and "Subnet mask" as follows:
• IPaddress:192.168.0.9
• Subnetmask:255.255.255.0
Depending on the network configuration, it is neces-
sary to configure "Default gateway". Refer to a sys-
tem administrator for further information about the
settings.
Step 7
Click the [OK] button and close the window.