Operating Instructions

54
55
Set up mask areas
Set up mask areas of the camera. For further information about this function, refer to the operating instructions
of the camera in use.
Step 1
Click the [Start] button.
→ A grid will appear over the image display area and
the segments designated as mask areas are cov-
ered with white translucent masks.
Step 2
Click a segment in the image display area.
→ Each click of the segment toggles between On
and Off for the mask area setting.
Step 3
Click the [End] button.
→ The mask area setting will be completed and the
grid will disappear.
Step4
Click the [Back] button.
The camera setup window closes, and the display
returns to the "Camera control [Advanced]" panel.
Note:
 • Itispossibletoresetallthemaskareasettingsby
clicking the [Reset] button.