Operating Instructions

32
33
Step 1
Display the images from the camera to search on a
1-screen. (☞ Page 20)
Step 2
Click the [Search] button on the playback operation
panel. (☞ Page 26)
→ The VMD search panel is displayed.
Step 3
Designate the time range to search.
Set the year, month, day and time of the start and end
point by clicking the respective [D] / [C] buttons.
Search and play recorded images triggered by motion
detection (VMD search)
Search images recorded with a camera supporting the VMD search function by the date motion was detected
and play them. Click a date & time on the result list to play corresponding recorded images.
Important:
 • Toperformthemotiondetectionsearch,itisnecessarytoconfigurethesettingsoftheconnectedcameras
that support the motion detection search function in advance. Refer to the "readme.txt" on the provided
CD-ROM about the supported camera. Refer to the operating instructions of the camera in use for further
information.
Step 4
Click the [Search] button.
→ This will run a VMD search within the designated
search range and display a list of results. Switch
between list pages by clicking the [Previous]/
[Next] buttons.
Note:
 • Upto100logsaresavedinthelist.Whenmore
than 100 logs are filed in the search result, "> 100"
will be indicated.
Step 4
To stop playback and return to live images, click the
stop button on the playback operation panel.
(☞ Page 26)
→ Playback will stop, and live images will be dis-
played.
Note:
 • Playbackcanalsobestoppedandliveimages
can also be displayed by the following operations:
 • Clickingthe[x]buttononthedate&timeoper-
ation panel (playback display)
 • Changingtheplaybackmedium