Operating Instructions
Table Of Contents
- Preface
- Before using this product
- Use an SD memory card
- Operation window
- Basic operation
- Login operation at startup
- Monitor live images
- Record images
- Play recorded images
- Play images from a designated point
- Search and play
- Play back copied images
- Event function
- Copy recorded images
- About the face matching function
- Operate the camera
- Configure the network settings
- Network security of the recorder
- Display the operation window
- About the operation window
- Monitor live images from cameras
- Play recorded images
- Play image recorded at a designated date & time
- Search and play recording events (REC event search)
- Motion detection search and playback (VMD search)
- Check a list of copied recorded images
- Event function
- Copy recorded images
- Download recorded images currently being played
- Play the copied/downloaded recorded images
- Operate the camera
- Setup
- Notification by e-mail
- Troubleshooting
- Glossary

20
21
Camera number panel
The camera number panel shows all camera-related
information, such as registration status, camera title
and recording status.
Camera number:
(Character color)
White: Camera is registered.
Gray: Camera is not registered.
(Background color)
Aqua: Image display area is displaying images
Blue: Camera is registered and image display
area is not displaying images.
Gray: Recording is not possible or camera is
not registered.
Camera title: Shows the first 8 characters of the pre-
viously entered camera title.
(Character color)
Same as camera number
(Background color)
Red: In the alarm state
Gray: Camera is not registered.
1-screen display (control screen only)
To display live images on a 1-screen, take the following procedures.
Displaying images on a 1-screen
Step 1
Click the camera number panel of the desired image
from the camera.
→ The background color of the selected camera
number will turn aqua, and live images will be dis-
played.
Displaying images on a multiscreen
Step 1
Click the 1-screen button for the screen pattern of
multiscreen.
→ The image display area will be displayed on a
1-screen.
Step 2
→ The background color of the selected camera
number panel will turn aqua, and live images will
be displayed.
Note:
• Anotherwaytodisplayimagesona1-screenisto
double-click the camera number panel of the
camera to be selected in the image display area.
• Inthemultiscreendisplayarea,double-clicking
the camera selection frame is also possible to dis-
play an image on a 1-screen.
• Theaudioofthecamerawhoseimagesarebeing
displayed will be output.
• Atthedefault,blackzoneswillbedisplayedon
the top and bottom of images with the aspect
ratio of 16:9. Refer to the Installation Guide for the
setting to enlarge the vertical size of displayed
images.
Recording indicator: Lights red when recording is
being performed. Display of [
] indicates a
connection error.
Multiscreen buttons
The 1-screen/4-screen/16-screen buttons are dis-
played.
Digital zoom buttons
When displaying images on a 1-screen or 4-screen,
the images can be enlarged/reduced (☞ page 24).
Mute button
Each click of this button toggles between mute and
mute cancel of the camera audio.










