Operating Instructions
Table Of Contents
- Preface
- Before using this product
- Use an SD memory card
- Operation window
- Basic operation
- Login operation at startup
- Monitor live images
- Record images
- Play recorded images
- Play images from a designated point
- Search and play
- Play back copied images
- Event function
- Copy recorded images
- About the face matching function
- Operate the camera
- Configure the network settings
- Network security of the recorder
- Display the operation window
- About the operation window
- Monitor live images from cameras
- Play recorded images
- Play image recorded at a designated date & time
- Search and play recording events (REC event search)
- Motion detection search and playback (VMD search)
- Check a list of copied recorded images
- Event function
- Copy recorded images
- Download recorded images currently being played
- Play the copied/downloaded recorded images
- Operate the camera
- Setup
- Notification by e-mail
- Troubleshooting
- Glossary

18
19
Step 1
Click the [Login] button on the operation screen.
→ The "Login" window will be displayed.
Step 2
Enter a user name and password. For character entry,
refer to "About the operation of on-screen keyboard"
(☞ page 16).
• RefertotheInstallationGuideforhowtoregister
users.
Note:
• When"On"isselectedfor"Quicklogin",theuser
name can be selected from the pull-down menu.
The password entered will be displayed as "*"
marks.
• Whenausertriestooperateanunauthorized
function in the logged-out state, the login window
will be displayed.
Login operation at startup
When "Off" is selected for "Auto login" (☞ Installation Guide), the recorder will start up in the logged-out state
after completing the system check.
When the operation window is displayed on the main monitor, enter a user name and password as follows:
Step 3
Click the [OK] button.
→ When the entered user name and password are
correct, the login window will disappear and the
login button will change to the logout button.
When the entered user name and password are
incorrect, the error window will be displayed.
Close the error window and log in again.
Note:
• Thedefaultadministratornameandpasswordare
as follows.
Administrator name: ADMIN
Password: 12345
• Toenhancethesecurity,changethedefault
administrator name and password before running
the recorder. Change the password periodically.
Refer to the Installation Guide for how to change
the password.
• Tologout,clickthe[Logout]buttonontheopera-
tion screen.
• Whenauserlogsoutorwhenautologoutisacti-
vated during copying, the copying will be can-
celed. (When operating the recorder using a web
browser, it will take around 90 seconds until copy-
ing is stopped after the web browser is closed.)
• Displayingimagesinthelogged-outstate
After startup with "Auto login" set to "Off", the
"4Screen-A" will be displayed.
When logging out during the login process, the
same screen as right before logout will be dis-
played.
(Which camera images the user is authorized to
display depends on the user level set up.)
• When"On"isselectedfor"Autologin",itis
unnecessary to perform the operations described
on this page.










