Operating Instructions

14
15
e Error button
Indicates that an error has occurred. Turn yellow in the error state. Clicking the buttons will toggle between
displaying/not displaying buttons such as the error log button and the error reset button.
r Alarm log display button
The alarm logs are displayed on the operation panel of the control screen.
Up to 750 error logs are saved. When more than 750 logs are filed, the older logs will be overwritten by the
newer logs. In this case, the oldest log is the first to be overwritten.
t Alarm reset button
Cancels the alarm action. Clickable only in the alarm state.
y Error log display button
The error (trouble) logs are displayed on the operation panel of the control screen.
Up to 1000 error logs are saved. When more than 1000 logs are filed, the older logs will be overwritten by
the newer logs. In this case, the oldest log is the first to be overwritten.
u Error reset button
Cancels the error (trouble) action. Clickable only in the error state.
i Face matching start/stop button
Starts/stops face matching actions manually. Face matching will resume when this button is clicked during
pause. Face matching will stop when this button is clicked during face matching actions.
o Face display (Thumbnail) button
The latest face matching results are displayed on the operation panel of the control screen. (☞ Page 45)
Live monitor (monitor for display of live images only)
Important:
 • Configurationandoperationoftherecorderfromthelivemonitorisnotpossible.
Live images from a camera set up in advance can be displayed on a 1-screen on the live monitor. When several
cameras are selected, camera images will be switched sequentially at the selected switching interval (sequence
display). In addition, camera images can be switched according to the signal input triggered by a terminal
alarm. (☞ Installation Guide)
Note:
 • Multiscreendisplayisnotpossible.
 • Thecameratitleanddate&timearenotdisplayedonthelivescreen.
 • Thedate&timeandcameraalsoappearonthecameraimagedisplayedonthelivemonitor,butsomechar-
acters may be cut off.
 • Todisplayimages,itisnecessarytoselectthecamerastobedisplayedinthesetupmenuinadvance.The
recorder is not configured to display camera images by default.
 • Dependingontheselectedswitchinginterval,ablackscreenmayappearbeforecameraimagesaredis-
played.
 • Whenthesecretviewfunctionisselected,thesinglescreenonthemainmonitororselectedimagesona
multiscreen will not be displayed.
 • Whilethesequencedisplayisbeingperformed,thesecretviewimageswillbeskipped(notdisplayed).
 • Theimageofacamerawhereanerrorhasoccurredwillnotbedisplayed.
 • Thesizeofdisplayedimageswillbefitintothescreenregardlessoftheaspectratio.