Operating Instructions
Table Of Contents
- Preface
- Before using this product
- Use an SD memory card
- Operation window
- Basic operation
- Login operation at startup
- Monitor live images
- Record images
- Play recorded images
- Play images from a designated point
- Search and play
- Play back copied images
- Event function
- Copy recorded images
- About the face matching function
- Operate the camera
- Configure the network settings
- Network security of the recorder
- Display the operation window
- About the operation window
- Monitor live images from cameras
- Play recorded images
- Play image recorded at a designated date & time
- Search and play recording events (REC event search)
- Motion detection search and playback (VMD search)
- Check a list of copied recorded images
- Event function
- Copy recorded images
- Download recorded images currently being played
- Play the copied/downloaded recorded images
- Operate the camera
- Setup
- Notification by e-mail
- Troubleshooting
- Glossary
12
13
Image display area
The number of images that can be displayed on the multiscreen differs for the control screen and the wide view
screen. Playback of images on a 16-screen is not possible while working with the control screen.
The default screen on startup (default screen) can be set for each login user in the image display area.
The following screen patterns can be selected. Refer to the Installation Guide for further information about the
settings of the default screen.
Camera 1 to 16: Each camera displayed on a 1-screen
4Screen-A: Camera 1 to 4 displayed on a 4-screen
4Screen-B: Camera 5 to 8 displayed on a 4-screen
4Screen-C: Camera 9 to 12 displayed on a 4-screen
4Screen-D: Camera 13 to 16 displayed on a 4-screen
16Screen: Camera 1 to 16 displayed on a 16-screen
Note:
• If"16Screen"hasbeenselectedasdefaultscreen,the4-screendisplayingCamera1toCamera4automati-
cally becomes the default screen of the web browser on the PC.