Operating Instructions
Table Of Contents
- Preface
- Before using this product
- Use an SD memory card
- Operation window
- Basic operation
- Login operation at startup
- Monitor live images
- Record images
- Play recorded images
- Play images from a designated point
- Search and play
- Play back copied images
- Event function
- Copy recorded images
- About the face matching function
- Operate the camera
- Configure the network settings
- Network security of the recorder
- Display the operation window
- About the operation window
- Monitor live images from cameras
- Play recorded images
- Play image recorded at a designated date & time
- Search and play recording events (REC event search)
- Motion detection search and playback (VMD search)
- Check a list of copied recorded images
- Event function
- Copy recorded images
- Download recorded images currently being played
- Play the copied/downloaded recorded images
- Operate the camera
- Setup
- Notification by e-mail
- Troubleshooting
- Glossary
10
11
Operation window
The recorder can be operated using the provided mouse connected to the mouse connection port on the front
side of the recorder. When operating the recorder using a web browser, refer to "Configure the network set-
tings" (☞ page 55).
Ctrl (control) screen display
The control screen is the default screen at startup. The main operations of the recorder are performed from this
screen.
q Image display area
Displays images from the camera. (☞ Page 19)
w Status display panel
Displays the statuses of the recorder. Also dis-
plays alarm/error status and remedies.
(☞ Page 14)
e Operation panel
Used to switch between screens, to play back
recordings, operate the camera and so on.
Displays the current date & time. While daylight
saving time is activated, the time will be displayed
with an asterisk (*).
r [Wide view] button
Switches the main monitor to wide view display.
e
r
w
q