Installation Guide

86
Menu/Tab
Setting item (including those of
the "Advanced setup" menu)
Available range Default Remarks
Schedule to record
(Time table2-Schedule
recording-HDD saving mode)
Checked/Not checked Schedule bar 1: Not checked
Schedule bar 2: Not checked
Schedule bar 3: Not checked
d
Schedule to record
(Time table2-Event recording)
--:--, 00:00 - 24:00 Schedule bar 1: --:-- - --:--
Schedule bar 2: --:-- - --:--
Schedule bar 3: --:-- - --:--
d
Schedule to record
(Time table2-Event recording-e-
Mail)
Checked/Not checked Schedule bar 1: Not checked
Schedule bar 2: Not checked
Schedule bar 3: Not checked
d
Schedule to record
(Time table2-Event recording-
Panasonic alarm protocol)
Checked/Not checked Schedule bar 1: Not checked
Schedule bar 2: Not checked
Schedule bar 3: Not checked
d
Advanced recording setup
Model (Registered information will be
displayed.)
(Registered information will
be displayed.)
d
Compression (Registered information will be
displayed.)
(Registered information will
be displayed.)
d
Image capture size When the aspect ratio is 4:3
QVGA(320x240)/
VGA(640x480)/
SXVGA(1280x960)/
SXVGA(800x600)
When the aspect ratio is 16:9
QVGA(320x180)/
HVGAW(640x360)/
HD(1280x720)/
FHD(1920x1080)
VGA(640x480)
d
Rate 1 ips, 3 ips, 5 ips, 10 ips,
15 ips, 30 ips
10 ips
d
Quality XF, SF, FQ, NQ FQ
d
Audio Off, On Off
d
Recording Off, On, Anytime On
d
Saving Depend, Except Depend
d
Referenced recording days (Calculated result will be dis-
played.)
(Calculated result will be dis-
played.)
d
Event setup Alarm action
Output duration 0 s, 2 s, 5 s, 10 s, 20 s, 30 s,
1 min, Ext., Rec.
2 s
d
Buzzer duration 0 s, 2 s, 5 s, 10 s, 20 s, 30 s,
1 min, Ext., Rec.
2 s
d
Auto reset time 2 s, 5 s, 10 s, 20 s, 30 s,
1 min, 3 min, 5 min, Ext.
Ext.
d
Message display Off, On On
d
Main monitor action Off, On Off
d
Advanced terminal alarm setup
Mode Off, Recording only, Recording
& alarm action
Recording & alarm action
d
Setup by terminal
(Recording camera)
Off, Cam.1, ..., Cam.16, All Camera number associated
with the terminal number
d
Setup by terminal (Preset) 001 - 256, --- ---
d
Setup by terminal (Terminal
output)
Off, On On
d
Setup by terminal
(Terminal input)
N.O., N.C. N.O.
d
Advanced camera site alarm setup
Mode Off, Recording only, Recording
& alarm action
Recording & alarm action
d
Setup by camera
(Recording camera)
Off, Cam.1, ..., Cam.16 Camera number
d
Setup by camera (Preset) 001 - 256, --- ---
d
Setup by camera
(Terminal output)
Off, On On
d