Installation Guide

[Date]

Set the current date. Select the year, month and day from

the calendar.

[<<Y]/[Y>>] button: Selects the previous or next year.

[<M]/[M>] button: Selects the previous or next month.

[Time]

Set the current time.

Step 3

Click the [Apply] button after setting the date & time.

→ The second will be set to "00".

[Set time zone]

Select your time zone.

GMT-12:00 - GMT+13:00

Default: GMT-5:00(WJ-NV200K, WJ-NV200VK)

GMT(WJ-NV200K/G)

Marking the checkbox for [Activate the Daylight saving time]

will active daylight saving time.

Step 4

Click the [Next] button.

→ The camera registration window opens.

Step 5

Note:

 • TousetheexistingIPaddressoftheconnectedcamer-

as, refer to "Detect cameras for registration [Detect cam-

eras]" (☞ page 46) instead of this section.

The minimum settings required to operate the recorder, such as the date & time, camera registration, recording, can be config-

ured on the setup menu - the "Quick setup" menu - "Easy Start".

First, configure the minimum settings on "Easy Start", and to configure more advanced settings, go to each setup page.

Available settings on "Easy Start"

 • Date&timeoftherecorder • Cameraregistration

 • Orderchangeoftheregisteredcameranumbers • Recordingframerateandimagequality

* Other settings will remain default or will be conformed to the camera settings.

Configure the minimum settings [Easy Start]

Step 1

Click the [Easy Start] button on the top screen of the setup

menu.

Refer to "Basic operations" (☞ page 36) for how to display

the setup menu.

→ The setup menu for the date & time will be displayed.

Step 2

Set the date & time.