Installation Guide

ManualsBrandsPanasonic ManualsDVD-playersWJ-ND400

Notes for installation of the ActiveX control/viewer software

When installing the ActiveX control or the viewer software, refer to the following together with the manuals

supplied to the recorder.

When the top page is displayed for the first time, the install wizard of the ActiveX control required to display

images from the camera will be displayed.

Since the viewer software will be installed along with ActiveX, downloading from the web browser by click-

ing the [VIEWER] button will not be required.

The viewer software can be downloaded from the web browser by clicking the [VIEWER] button.

Install the downloaded viewer software to a PC which is not connected to this unit. The name of the down-

loaded viewer software is "wvasetup.exe". When referring to the manuals supplied to the recorder, substi-

tute "n3vsetup.exe" with "wvasetup.exe".

Select "WebVideo ActiveX" from "Change or remove programs" on the "Control Panel".

ActiveX control and the viewer software will be uninstalled.

Uninstall the older version of the ActiveX control or the viewer software for WJ-ND400 first before starting

the installation of the newer version.

Note: Model number suffixes are not shown for the model numbers described above.

Notes on the viewer software

The viewer software that can be downloaded from WJ-ND400 has been changed.

When referring to the "Operating Instructions" (PDF) supplied to these products, substitute the following

with "How to use the viewer software" respectively.

Model No. Sections and their pages to be substituted

WJ-ND400

"Play downloaded images using the viewer software" to "Perform the alteration detec-

tion" (Pages 50 to 53)

Summary of content (4 pages)

PAGE 1
Notes for installation of the ActiveX control/viewer software When installing the ActiveX control or the viewer software, refer to the following together with the manuals supplied to the recorder. When the top page is displayed for the first time, the install wizard of the ActiveX control required to display images from the camera will be displayed.
PAGE 2
How to use the viewer software Select "ND_Viewer" from the start menu ("All programs" – "Panasonic" – "Network Disk Recorder" – "ND_ Viewer") or double-click the ND_Viewer icon on the desktop. Playback operation button Search box Image display area List display area Playback operation window when images are displayed on a full screen Select recorded images currently being played Note: • Do not change the file name of the copied or downloaded image data.
PAGE 3
• When there is a data in the same directory as the viewer software or the "data" folder in the same directory, the data will automatically be loaded for playback. • It is possible to change the aspect ratio of the image display area by selecting the ratio from . Select the setting in accordance with the aspect ratio and the image capture size of the image data. Playback downloaded images Use the playback operation button to play downloaded images.
PAGE 4
Save still images Save an image displayed in the image display area as a JPEG file on a PC. Step 1 button. Click the → The "Save As" window will be displayed. Step 2 Enter the file name and select "Save as type: JPEG (*.jpg)". Designate the folder and click the [Save] button. → The image data will be saved. Save image data (copy) Save selected image data (filename.n3r) in any folder on the PC. Step 1 Right-click the list and select [Copy] from the displayed menu.