User Guide

-12-

SYSTEM 1

The input video signals for this unit are not synchronized.

Notes :

• When pressing the ALARM RESET/QUAD/SEQ/ECS button or the VIDEO SELECT/CURSOR/SELECT buttons, the pic-

ture on the video monitor may roll briefly at the time of switching.

• The video signal to be recorded by the VTR should be supplied from the VTR OUT connector of this unit and not from

the VIDEO OUT/ESC connector of this unit, unless VTR servo control disturbances are allowable when setting the

ALARM RESET/ QUAD/SEQ/ECS button or the VIDEO SELECT/CURSOR/SELECT buttons.

Connections

• Connect the VIDEO IN connectors of this unit to the video output connectors of the cameras.

• Connect the VTR OUT connector of this unit to the video input connector of the time lapse VTR for recording.

• Connect the VIDEO OUT connector of this unit to the video input connector of the video monitor.

VTR

OUT

VIDEO

OUT

ALARM/REMOTE

INOUT

VIDEO

INOUT

SIGNAL GND

Monitor

VTR

WJ-MS424

VIDEO

SYSTEM CONNECTIONS