Panasonic Owner's Manual Instrucciones de funcionamiento 3D Conversion Lens Model No. VW-CLT1 Before connecting, operating or adjusting this product, please read the instructions completely. Antes del uso, lea completamente estas instrucciones. #1.' [EJ For Canadian assistance, please call: 1-800-561-5505 or visit us at www.panasonic.
Before use Contents Before use To Avoid Malfunctions Cautions for use Accessories Parts identification and handling Attaching/Detaching the Lens to/ from the video camera Adjust the attachment position and record Specifications Limited Warranty (ONLY FOR U.S.A. AND PUERTO RICO) Warranty (For Canadian Customers) Useful Information (Only For Latin American Cou ntries) I ••••••••••••••••••••••••••••••••••••••••••••••••••• 1 •••••••••• 1.
English lO~VQid···Malfunctions • About the Handling of the 3D Conversion Lens • Sand or dust will cause malfunctions in the 3D Conversion Lens. Be careful not to allow sand or dust to get inside the 3D Conversion Lens when using at the beach or similar. • The 3D Conversion Lens is not waterproof. Wipe with a dry cloth if any water gets on it. Contact the retailer or the service center when it does not operate properly.
Do not drop or strike the 3D Conversion Lens when carrying it. Also, be careful not to apply strong force to the 3D Conversion Lens. • Be careful that no shock is applied to the 3D Conversion Lens by dropping or striking the bag with the 3D Conversion Lens stored within. It may cause a malfunction or stop images from being recorded. It may also damage the 3D Conversion Lens. • Do not carry the video camera with the 3D Conversion Lens attached by holding onto the 3D Conversion Lens only.
Do not allow any insecticide or volatile substance to get on the 3D Conversion Lens if they are used in the surrounding area. • Failure to observe this may result in deformation or the coating peeling off. Do not use solvents such as benzine, thinner, alcohol, etc., for cleaning. • Solvents may cause discoloration or damage. • Do not touch or contaminate the surface of the protective glass. Blow any dust off using a commercially available blower brush and wipe gently with a dry soft cloth if contaminated.
• About 3D viewing Anyone who is hyper sensitive to light, suffers from heart disease or is otherwise unwell should avoid viewing 3D video. • Doing so may have an adverse affect on such medical conditions. If you feel tired, uncomfortable or otherwise strange when viewing 3D video, stop viewing at once. • Continuing to view may cause illness. • Please rest appropriately after stopping the viewing. When viewing 3D video, we recommend taking a break every 30 to 60 minutes.
·lllssories Check the accessories before using the lens. Keep the accessories out of reach of children to prevent swallowing. Product numbers correct as of Dec. 2010. These may be subject to change. VFC4619 Lens storage bag VYK4K64 Lens front cap*1 VGOOM57 Lens rear cap*1 (for the 3D Conversion Lens) VYK4V31 *1 *2 • Step up ring Lens rear cap*2 (for the step up ring) (the product number of the lens rear cap: VGOOU39) This is attached to the 3D Conversion Lens at the time of purchase.
liiI1l1!I~i'_lgIIIII11!,llllgi:!!ig!_'!1,1_1!1gBlliglll'liII'I:I:,'! 1 2 3 4 5 6 ~_ 4 I 5 6 8 VQT3A68(ENG) Attachment screw Protective glass (front) Lens Adjustment dial cover Protective glass (rear) Camera body attachment part (convex)
7 8 9 Vertical position adjustment dial [fJ] Vertical alignment adjustment dial [I)] Horizontal image position adjustment dial [0] Lens front cap ~ 7 8 ~-~ 9 - -• . _. ....'_.., ........w..,..• 10 10 Horizontal line for adjustment • Use to adjust the lens attachment position.
• To attach the 3D Conversion Lens to [HDC-SD90]/[HDC-TM90], a supplied step up ring is required. 1 Rotate the lens rear cap (for the 3D Conversion Lens) in the direction indicated by the arrow. • Rotate the lens rear cap while pushing on the attachment screw with your fingers. • For users who have [HDC-SD800]/[HDC-TM900]/ 1IIBmmIO, proceed to step 3.
2 For users who have [HDC-SD90]/[HDC-TM90] Remove the lens rear cap from the step up ring and attach the step up ring to the 3D Conversion Lens. • Attach the step up ring to the 3D Conversion Lens first, and then attach the step up ring part to the video camera. • Video is not recorded properly when only the step up ring is attached to the video camera. • Attach the step up ring to the 3D Conversion Lens with the [.. UP] mark side up .
4 Tighten the attachment screw by rotating to LOCK. • [H DC-SDBOO j / [H DC-TM900 j I III!I!1mmml Rotate the attachment screw of the 3D Conversion Lens. • Be careful not to overtighten. If the 3D Conversion Lens is overtightened, you may not be able to remove it from the video camera. • Attach the 3D Conversion Lens securely so it will not tilt or move. LOCK • Removing the 3D Conversion Lens Rotate the attachment screw to UNLOCK to loosen and then remove.
• When not using the 3D Conversion Lens Attach the lens rear cap to the 3D Conversion Lens • It can be stored inside the supplied storage bag. ~ • Rotate the lens rear cap holding the attachment screw with your fingers. • (HDC-SD90]/(HDC-TM90] 3D Conversion Lens can be stored in the supplied storage bag with the step up ring attached.
• Attaching/Detaching the lens front cap • If you use the lens front cap as a stand as shown below, you can leave the video camera with the 3D Conversion Lens attached. • Be careful not to lose the lens caps. • When storing, always attach the lens caps to avoid scratching the protective glass.
When using for the first time, be sure to adjust the 3D Conversion Lens attachment position. • Change the mode to .;; on the video camera. 1 Attach the 3D Conversion Lens to the video camera. (.. 10) 2 Turn on the video camera. • Turn on with the video camera in a horizontal state. • The 3D Conversion Lens adjustment mode screen will appear automatically after performing the initial setting.
5 Open the adjustment dial cover. 6 (After checking the operation description, touch [NEXT].) Adjust the horizontal position by rotating the horizontal image position adjustment dial D to place the black vertical line between the images at right and left in between the red guidelines O. • When turning the adjustment dials, hold the video camera in the palm of your hand from the bottom and operate with the fingers of your other hand without applying too much force from above.
7 (After checking the operation description, touch [NEXT].) To adjust the vertical position, rotate the vertical position adjustment dial fJ so that the black horizontal line at the right of the screen is in the center of the red guidelines f). 9 (After checking the operation description, touch [NEXT].) Adjust the vertical alignment adjustment dial to align the vertical position of the subject shown duplicated. D • :.)~.e: r;::~:... ~:. 2::": a:.J::::":S: • • Touch [NEXT].
• It is recommended to stabilize the video camera using the lens front cap as a platform when performing the adjustment. (~ 14) • Touch [COMPLETE]. 10 Touch [EXIT] to end the adjustment. • After adjustment, a single screen appears. • When re-attaching the 3D Conversion Lens or after an impact etc., it is recommended that you perform the adjustment again. 11 Press the recording start/stop button to start recording.
• 3D Conversion Lens Dimensions: 78 mm (W)X59 mm (H)x97 mm (0) [3.07" (W)x2.32" (H)x3.82" (0)] [Without Lens Cap (front/rear) and step up ring] 78 mm (W)X59 mm (H)x 111 mm (0) [3.07" (W)x2.32" (H)x4.37" (0)] [With the step up ring, without Lens Cap (front/rear)] Mass (Weight): Approx. 195 g (Approx. 0.429 Ibs.) [Without Lens Cap (front/rear) and step up ring] Approx. 219 g (Approx. 0.482 Ibs.
Panasonic Consumer Electronics Company, Division of Panasonic Corporation of North America One Panasonic Way, Secaucus, New Jersey 07094 Panasonic Camcorder 3D Conversion Lens Limited Warranty Limited Warranty Coverage (For USA and Puerto Rico Only) If your product does not work properly because of a defect in materials or workmanship, Panasonic Consumer Electronics Company (referred to as "the warrantor") will, for the length of the period indicated on the chart below, which starts with the date of origin
Carry-In or Mail-In Service To find a service center please visit http://www.panasonic.com/help or call 1-800-211-PANA (7262). When shipping the unit, carefully pack, include all accessories, and send it prepaid, adequately insured and preferably in the original carton. When shipping Lithium Ion batteries please visit our Web Site at www.panasonic.com/BatteryHandling as Panasonic is committed to providing the most up to date information.
(As examples, this excludes damages for lost time, travel to and from the servicer, loss of or damage to media or images, data or other memory or recorded content. The items listed are not exclusive, but for illustration only.) ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY.
Accessory Purchases (United States and Puerto Rico) Purchase Parts, Accessories and Instruction Books online for all Panasonic Products by visiting our Web Site at: http://www.pstc.panasonic.com Or, send your request by E-mail to: npcparts@us.panasonic.
War,.ant!(~~~i~~_itJ~.us~~~~~) Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 PANASONIC PRODUCT - LIMITED WARRANTY Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship under normal use and for a period as stated below from the date of original purchase agrees to, at its option either (a) repair your product with new or refurbished parts, (b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase price.
adjustments, misadjustment of consumer controls, improper maintenance, improper batteries, power line surge, lightning damage, modification, introduction of sand, humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the product, or service by anyone other than an Authorized Servicer, or damage that is attributable to acts of God. Dry cell batteries are also excluded from coverage under this warranty.
Customer Service Customer Services Directory Obtain product information and operative assistant; localize the closer distributor or Service Center; buy spare parts and accessories by our web site to Latin American: .tJ.np://www.lar.panasonic.
Mexico Service To obtain information in the Republic of Mexico contact us at: email: atencion.clientes@mx.panasonic.com Or you may contact us in the next following phones numbers: 01800-VIP-PANA (01800-847-7262) - Interior (55) 5000-1200 - Mexico D.F.
VQC8308 ENGLISH Basic recording method for 3D video 3D video recorded using the 3D Conversion Lens will appear three-dimensional using the difference in the images seen with your left and right eyes. You may feel tired due to the difference in the image seen by each eye. Also, depending on the image being viewed, you may feel like you are moving, and feel motion sickness due to the image. To enjoy 3D video safely and comfortably, pay attention to the following points when recording 3D video.
G> co 0) N r 0 < -G) 0 0 0 Z r r --i 0 0 ::0 m m I () » c G) -; » » OJ I en C < m • J) . m J) J) <. 0 J) m-J) . m J) J) 0 < OJ I m-m en C < J) » » ---i -; 0 0 ::0 m m I () » c G) ~ C () () "T1 I -; -; . . . . Z ."1l. A .A. m r :::0 0 C ~ ~ _. --._. - CDCIl-o CIl' CIl m·~. Ql-CIl _. Ql ..., ~ CIl CD_c: CIl (") ..., "'0 0 CD o ~ C" c:-o ..., c: 0 (") CIl CD s,"'O ..., Ql 0 "'0 ~ a. "'0_ CD Ql 0 • ..., c: Ql ~. CIl "'0 ~-~ CD Ql ..., CIl CD Ql "'0 0 "'0 c: Ql ...
