Operating Instructions

Note:

R These settings apply to all registered email addresses.

2.8 Managing wireless access points

A wireless access point is a device that allows your mobile device to connect to a network via Wi-Fi. (In most situations,

your wireless access point is your wireless router.) A wireless access point is identified by the SSID (wireless network

name) that is assigned to it.

The app maintains a list of up to 10 wireless access points that it can use to connect to your main monitor. In the

following situations, use the procedure described in 2.8.1 Adding wireless access points (Page 14) to add additional

wireless access points to the list.

When the main monitor is connected to a wireless access point that has multiple SSIDs (wireless network

names)

In this case, add each SSID of the wireless access point to the list. This allows the app to connect to the main monitor

regardless of which SSID your mobile device is connected to.

When there are multiple wireless access points with different SSIDs placed throughout your house in order

to create a single network with wide wireless range

In this case, add the SSID of each wireless access point to the list. This allows the app to connect to the main monitor

as you move between different areas of your house.

Note:

R Wireless access points are identified by their SSIDs, therefore, you do not need to register additional wireless

access points if they use the same SSID as a wireless access point that you have already registered.

2.8.1 Adding wireless access points

Automatically adding wireless access points

If your mobile device is connected to a new wireless access point (i.e., an access point whose SSID has not been

added to the wireless access point list), the [Video Intercom] app prompts you to add the wireless access point.

When [Connected to a new wireless access point (SSID). Do you want to add it?] is displayed when using the

[Video Intercom] app, tap [OK].

Manually adding wireless access points

1. Connect to the wireless access point that you wish to add.

2. Start the [Video Intercom] app.

3. From the [Video Intercom] app’s top screen, tap

® [Wireless access point].

4. Tap [+] displayed on the top-right corner of the screen.

5. Confirm the message ® [OK].

Confirming the list of wireless access points

1. From the [Video Intercom] app’s top screen, tap ® [Wireless access point].

R The wireless access point list is displayed.

Deleting wireless access points

1. From the [Video Intercom] app’s top screen, tap ® [Wireless access point].

R The wireless access point list is displayed.

2. Select the wireless access point that you wish to delete.

3. Confirm the message ® [OK].

2. Using the app