FP0 Series Programmable Controllers 07/2007 1
FP0 – Super Compact PLC Control FPWIN Pro PLC Programming Incredibly Small, Alone Software or Even conforming as Multiple to IEC61131-3 Combined Units From I/O 10-points… MM Actual size «ÕÌÉÕÌ«ÕÌÊÌiÀ> MM 4HE PHOTO SHOWS A CONTROL UNIT WITH ) /S 4HIS SIZE IS UNIFORM FOR ALL EXCEPT THE ) / POINT CONTROL UNIT 3UPPLY VOLTAGE 6$# /"" Ê«ÀÌ (OOKS UP BY USING THE PROGRAMMING SOFTWARE #ONTROL &07).
Either 10 Points or the Maximum of 128 Points You Save This Much Space! …up to 128 I/Os MM #ONTROL UNIT %XPANSION UNIT %XPANSION UNIT %XPANSION UNIT ■ Networking: - ETHERNET - Modbus - PROFIBUS - S-LINK - MEWNET-F ■ Analogue modules featuring different numbers of input and output channels ■ Programming software: - Control FPWIN Pro according to IEC 61131-3 - Control FPWIN GR easy, conventional programming 4HE PHOTO ILLUSTRATES ADDING THREE POINT ) / EXPANSION UNITS TO AN POINT ) / CONTROL U
FP0 CPU Units A Rich Line-Up of Both Single and Combined Units Control units Relay output type 10 points Input 6 points Output 4 points Transistor output type 10 points Input 6 points FP0-C10RSA 14 points Output 4 points Input 8 points FP0-C10CRSA 14 points Output 6 points Input 8 points FP0-C14RSA with 2nd RS232C 16 points Output 6 points Input 8 points 16 points Output 8 points Input 8 points Output 8 points 32 points 32 points Input Output 16 points 16 points Input Output 16 poin
FP0 Expansion Units Choose the Number of I/O Points to Suit the Application Digital I/O units Relay output type 8 points Input 4 points Output 4 points Input only type 16 points Input 8 points FP0-E8RSA Output 8 points FP0-E16RSA Transistor output type 32 points 8 points 16 points 8 points Input Output 16 points 16 points Input 8 points Input 16 points Output 8 points FP0-E32RS FP0-E8XA FP0-E16XA FP0-E8YPA (PNP) FP0-E16PA (PNP) FP0-E16YPA (PNP) FP0-E32PA (PNP) FP0-E8YTA (NPN) FP0-E16T
FP0 – Impressive Capabilities High Specifications for Both Speed and Capacity 0.9µs per basic instruction. Pulse catch and interrupt input functions meet the need for high-speed response. High-speed execution Execution speed of 0.9µs per basic instruction. 500 step programme yields a scanning time of 1ms.
FP0 – Impressive Capabilities FP0 Functions Equipped with 2-axis independent positioning and high-speed counter for support of PWM output. Pulse output function The unit comes equipped with 2 channels for the output of up to 10kHz pulses (5kHz during 2-channel output). Since these two channels can be separately controlled, the PLC is also suitable for independent 2axis positioning.
FP0 Communication Serial Interfaces and Modem Compatible Communication – Simple and efficient via two serial interfaces: TOOL port and COM port (RS232C interface). Programming interface TOOL port (also for communication) In MEWTOCOL-COM Slave mode, this port offers access to the entire FP0 memory area. For example during data exchange between a host PC running SCADA software and an FP0 PLC, the Windows® based FP OPC Server assumes total control of the communications protocol (MEWTOCOL.COM).
FP0 Communication Easier Maintenance Than Ever Before Maintenance saving Program memory uses EEPROM. In addition, programmes can be changed even in RUN mode! ■ Overwrite function in RUN mode It is possible to overwrite a program while the FP0 is running, such as during program debugging and startup adjustments. ■ Backup battery unnecessary The program memory uses EEPROM. The program and device contents can be stored without a backup battery, and even programming for a machine builder is safe.
FP0 PROFIBUS DP Slave or Remote I/O Unit For Cost Effective Control of Distributed Field Device The FP0 DPS2 can operate either as a DP Slave module or as a remote I/O system to which different decentralised inputs and outputs can be connected. A DIP switch can be used to switch between the two modes: Mode 1: DP Slave module. Connect the FP0 or FPΣ (Sigma) CPU + expansion modules to the PROFIBUS network. Mode 2: Remote I/O. Connect up to three expansion modules without CPU to the PROFIBUS network.
FP0 S-LINK Unit Connects Directly to the S-LINK for Reduced Wiring S-Link is a system which simplifies connection of rapidly increasing control devices accompanying progressing automation and is useful in reducing your costs and construction time. Features 1. Small size of only W30xH90xD60mm. Makes use of the T-shaped connectability of the S-LINK for reduced wiring and reduced size of the control panel. 2. Controls 64 input points and 64 output points.
FP0 MEWNET-F Unit Networking Units MEWNET-F The FP0 can be used as a slave station for MEWNET-F (remote I/O system) by adding I/O link unit. MEWNET-F is a reduced-wiring, remote I/O system that connects PLCs located separately and I/O slave stations with 2-core cabling. By adding an I/O link unit to the FP0, you can link master station PLC and FP0 inputs and outputs via the network.
Analogue Signal Processing FP0 Analogue Units Features FP0-A21 FP0-A80 FP0-A04V FP0-A04I 2 Inputs/1 Output 8 Inputs 4 Outputs 4 Outputs ■ Multimode A/D, D/A conversion Voltage, current and temperature selectable ■ High resolution: 12-bit ■ 2 analogue inputs (FP0-A21): -10 to + 10V, 0 to 5V, 0 to 20mA, 8 analogue inputs (FP0-A80): -10 to + 10V, 0 to 5V, -100 to + 100mV, 0 to 20mA ■ High conversion speed FP0-A04V, FP0-A04I: 500µs ■ PID instruction with auto tuning ■ 1 analogue output (FP0-A21): -
Analogue Signal Processing FP0 Analogue Units General specifications Item Rated operating voltage Description 24VDC Operating voltage range 21.6 to 26.
FP0 Thermocouple Input Expansion Units Enable High Precision Temperature Control at Low Cost Temperature control The FP0-TC4 and FP0-TC8 thermocouple units are suitable for user-friendly temperature acquisition using standard thermocouples with high precision. ■ Up to three units can be added to each control unit, enabling temperature control of up to 24 channels. ■ The temperature data obtained using the thermocouple is converted to the digital value to be read into the FP0 control unit.
FP0 RTD Input Expansion Unit User Friendly Acquisition of Temperatures with High Precision Features ■ The module can be easily installed in an existing system. Special connection cables, backplanes, and so forth are unnecessary as the expansion unit employs a stacking system that uses expansion connectors and lock levers on the surface of the unit itself. ■ Multiple RTD types are allowed in one module, creating a cost-effective solution.
FP0 Series Specification Tables FP0 specifications 4YPE OF CONTROL UNIT # SERIES # SERIES # SERIES # SERIES 2ELAY OUTPUT TYPE ONLY 2ELAY OUTPUT TYPE ONLY 4RANSISTOR OUTPUT TYPE ONLY 4RANSISTOR OUTPUT TYPE ONLY 3 ,).+ TYPE 4 SERIES 4RANSISTOR OUTPUT TYPE ONLY 0ROGRAMMING METHOD #ONTROL METHOD 2ELAY SYMBOL #YCLIC OPERATION 4OTAL .
FP0 Series Specification Tables Interfaces Item Description Programming TOOL port RS232, mini DIN socket (5 pin), 9600 or 19200 BAUD, (8 data bits, odd parity, 1 stop bit), Computer link for programming and communication with MEWTOCOL-COM, user configurable modem connection Communication COM port RS232 (SD, RD, GND) 3 way screw terminal, 300 to 19200 BAUD, (7 or 8 data bits, none/even/odd parity, 1 or 2 stop bits, start code: none/STX, end code: CR/CR+LF/ETX/none, CCU mode for programming and communica
Control FPWIN Pro Programming According to the International Standard IEC 61131-3 FPWIN Pro is the Panasonic programming software developed according to the international standard IEC 61131-3 (for Windows 98, NT V4.0, 2000, ME or XP). This new version is a result of experience gained over many years. We were one of the first PLC manufacturers to offer an IEC 61131-3 programming software, and we are a leading member of the international organisation PLCopen.
FP Web-Server Programme/Operate the FP0 Using a LAN or WAN Network The multifunctional FP Web-Server provides users with the option of connecting the FP0 or any other FP Series PLC to the Internet/Intranet thus enabling bi-directional communication. No changes to the PLC programs are necessary. Simply assign an IP address to the FP Web-Server and connect the PLC to the FP Web-Server via the serial RS232C interface. A standard browser e.g.
Control CommX, PCWAY, OPC Server Visualisation Software for Ready Made or Customised Solutions Control CommX The connection in ActiveX technology. ■ Connects your Visual Basic application to Panasonic PLCs. ■ Gives you the possibility to easily develop highly customised control solutions. ■ Create your own application very quickly by simply adding the functionality of ActiveX control to your code written with Visual Basic. ■ No knowledge of MEWTOCOL (Panasonic's PLC communication protocol) needed.
FP0 Control and Expansion Units Products and Order Numbers Control units Relay output type 10 points 10 points 14 points 14 points Input 6 points Output 4 points Screw terminal type Input 6 points Output 4 points Screw terminal type Input 8 points Output 6 points Screw terminal type Input 8 points Output 6 points Screw terminal type Order number: FP0-C10RSA Order number: FP0-C10CRSA with 2nd RS232C interface Order number: FP0-C14RSA Order number: FP0-C14CRSA with 2nd RS232C interface Transist
FP0 Analogue and Networking Units Products and Order Numbers Analogue units 3 points 8 points 4 points 4 points Input 2 points Output 1 points Screw terminal type Input 8 points Output 4 points Output 4 points Order number: FP0-A21A Screw terminal type Order number: Screw terminal type FP0-A80A Order number: FP0-A04V Screw terminal type Order number: FP0-A04I Temperature control units 4 points 8 points 6 points Input 4 points Screw terminal type Input 8 points Screw terminal type Inp
Accessories Products and Order Numbers Options Wiring tools Parts for attachment I/O cables & networks Attachment example Terminal screwdriver Necessary when wiring relay output type & terminals (Phoenix). Order number: AFP0806 Slim attachment plate model Transistor output type I/O cable Screw-stop attachment plate. Slim model.
Programming Tools and Current Consumption List Products and Order Numbers Programming software and cables Control FPWIN Pro English, German, French, Italian, Spanish, Japanese menu selectable.
FP0 Series Power Supplies Features ■ Small size: - FP0 power supply: 90 x 60 x 30.4mm - FP power supply: 115 x 75 x 42mm ■ Maximum output current: - FP0 power supply: 0.7A (24VDC) - FP power supply: 2.1A (24VDC) ■ Multiple voltage input: 85 to 265VAC ■ Optimal protection: overvoltage, overcurrent, overheating, etc. ■ Global approvals (UL/cUL, EN, CE-marking) ■ DIN-rail mounting (FP0 power supply also side mounting) Performance specifications 30.
FP0 Product Overview Order Numbers Product Name Part Number 1.
Global Network Services Global Network North America Europe Asia Pacific China Japan Panasonic Electric Works Please contact our Global Sales Companies in: Europe ! Headquarters ! Austria Panasonic Electric Works Europe AG Panasonic Electric Works Austria GmbH PEW Electronic Materials Europe GmbH ! Benelux Panasonic Electric Works Sales Western Europe B.V. ! Czech Republic Panasonic Electric Works Czech s.r.o. ! France Panasonic Electric Works Sales Western Europe B.V.