Operating instructions

36
Viewing Image on LCD Monitor Screen
1
Open the LCD monitor.
The LCD monitor has a portion where you can
hook your finger. Hook the finger there to open
the monitor.
Note
:
•
See “LCD/EVF Setup” (P. 85) for information on displaying
the viewfinder image regardless of whether the LCD
monitor is open or closed.
z
Range where the LCD monitor can
be moved
The LCD monitor can be opened up to
approximately 90°.
If the LCD monitor is open 90°, it can be tilted with
the screen down as much as 90°, and can also be
tilted with screen up and turned up to 180° so the
screen faces in the same direction as the lens.
If the LCD monitor is turned 180° so the screen
faces in the same direction as the lens during
recording, subject image will also appear in the
viewfinder as an mirror image (left/right reversed).
Tilt the LCD monitor to adjust its vertical angle so
that you can see the screen easily.
Note
:
•
If no image appears on LCD monitor screen, refer to
“Check 7” on page 140.
•
Be sure to open the LCD monitor approximately 90
°
before changing its vertical angle.
•
Do not record for a prolonged time with the LCD monitor
facing outside in close contact with the DVD Video
Camera body (see diagram, right): Doing this could
cause the DVD Video Camera and LCD monitor to
become hot.
Grab the bottom
with your finger
and pull it out.
90°
180°
VDR-M75M55EB.book Page 36 Tuesday, May 17, 2005 10:32 AM