Operating instructions

ManualsBrandsPanasonic ManualsCamcordersVDRM30PP

100

123

Initial Settings

Switching Operating Sound On or Off (Beep)

This DVD Palmcorder will emit sound when the power switch is changed over, the REC button is pressed,

or other operations are engaged. If you do not need operating sound, you can switch it off.

1Press the MENU button,

choose “Beep” on the

“Initial Setup” menu

screen, and then press the

A button.

2Select “On” or “Off”, and then press the A

button.

3Press the MENU button to end the setting.

Note:

The “Beep” setting will be stored in memory even when the

DVD Palmcorder is turned off.

Turning DVD Palmcorder Off Automatically (Power Save)

This DVD Palmcorder is equipped with power save function. Specify “Power Save: On”: If the DVD

Palmcorder is left in the recording pause status without being operated for 5 minutes, it will automatically

turn off to prevent the battery pack from discharging needlessly.

1Press the MENU button,

choose “Power Save” on

the “Initial Setup” menu

screen, and then press the

A button.

2Select “On” or “Off”, and

then press the A button.

3Press the MENU button to end the setting.

Note:

• To turn the DVD Palmcorder on again from automatic off

activated by the power save function, set the power

switch to “POWER OFF”, and then set it to “

O VIDEO”,

“

N PHOTO” or “P PHOTO”

• The Power Save setting will not appear in the on-screen

information display.

• The Power Save setting will be stored in memory even

when the DVD Palmcorder is turned off.

Setting Content

On Beep is heard

Off No beep is heard

Ini t ial Setup

Of f

RAM

Power Save

Beep

ENTER RETURN

Reset

Language

Record LED