Operating instructions

Macro Recording

Use the macro function when recording a small object from close-up position: You can shoot the subject

as close as approximately 13/16” (2 cm) from the lens surface, magnifying the image to fill the screen.

1Aim the DVD Palmcorder at the subject, and

press down the zoom lever to “W” control side.

Note:

• Zoom can be used, but the subject may not be focused,

depending on the distance to the subject. In this case,

move the zoom to “W” control side to focus.

• The amount of light tends to be insufficient during macro

recording: If the subject image is too dark, use additional

lighting.

Using Conversion Lens (Optional-User Provided)

Use optional-user provided tele-conversion lens or wide-conversion lens with filter diameter of 30.5 mm.

Remove the lens hood on the top surface of lens, and then attach the conversion lens over the lens.

Note:

The four corners of screen may be dim depending on the

conversion lens used.

(Attach)

Conversion lensLens hood

(Remove)