Operating instructions

111
1
Copying Stills on DVD-RAM Disc to Card (Copy)
You can copy stills recorded on DVD-RAM disc to card.
1Set the power switch to “O VIDEO” or
“N PHOTO“.
2Press the DISC NAVIGATION button.
3Select the still to be copied.
4Press the MENU button.
5Choose “Copy” on the
“Scene” menu screen,
and then press the A
button.
6The “Copy to card”
screen will appear: If you
are sure you want to copy
the selected still, press the
A button.
If you want to change the
still to be copied, you can change it on this
screen.
7The screen for verifying
copy will appear: Choose
“YES”, and then press the
A button.
Choose “NO” to cancel
copy.
After Yes or No setting, the “Copy to card”
screen will be restored.
Repeat steps 6 and 7 to copy other stills to card.
8Press the C button to quit.
Note:
• No movie can be copied.
• When you can copy stills recorded on DVD-RAM disc to
card, recording quality will automatically be set to “FINE”.
• If you press the MENU button before pressing the A
button in step 6, the submenu screen will appear. (P.104)
• See “Category” (P.132) to check the stills recorded on
DVD-RAM disc.
• You can also select multiple scenes (P.100).
• Even if all scenes, including movies, are selected to be
copied, only stills will be copied.
• Data on card cannot be copied to disc.
• Stills recorded on a device other than this DVD
Palmcorder may not be copied normally.
Scene
RAM
ENTER RETURN
Delete
Ed i t
Copy
Sel ect
Det a i l
ETC
Copy to card 003/014
RAM
ENTER EX I T
ENTER
Copy PHOTO scenes
to card?
Copy to card
YES NO