LSQT1022(TC_GC).book 1 ページ ２００６年２月７日 火曜日 午前１１時５９分 Cover 使用說明書 Operating Instructions DVD 攝錄放影機 DVD Video Camera VDR-D300GC VDR-D250GC Model No. ≥ 圖例說明的是 VDR-D300 型。 ≥ VDR-D250 型沒有內置閃光燈。 ≥ The illustration shows VDR-D300. ≥ VDR-D250 does not have a built-in flash. 使用前，請仔細閱讀本說明書。 Before use, please read these instructions completely.
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).book 4 ページ ２００６年２月７日 火曜日 午前１１時５９分 目錄 使用之前 拍攝 特點 ........................................................ 6 附件 ........................................................ 8 部件的識別和操作................................. 10 拍攝之前 .............................................. 50 拍攝動態影像 ....................................... 52 使用 LCD 顯示屏 ..................................... 16 使用取景器 .............................................. 16 使用遙控器 ..............................................
LSQT1022(TC_GC).book 5 ページ ２００６年２月７日 火曜日 午前１１時５９分 編輯 用計算機 編輯場景............................................... 87 和計算機一起使用之前........................118 刪除場景 .................................................. 87 分割場景 .................................................. 89 合併場景 .................................................. 90 可以用計算機做什麼.............................. 118 提供的 CD-ROM 上的內容 .................... 119 操作環境................................................ 121 終端用戶許可協議 ........................
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).book 20 ページ ２００６年２月７日 火曜日 午前１１時５９分 光碟和記憶卡 光碟和記憶卡 本機上可以使用的光碟 使用之前 光碟類型 DVD-RAM 8 釐米 單面／雙面 DVD-RW 8 釐米 單面／雙面 DVD-R 8 釐米 單面／雙面 （DVD-RAM 2.1 版） [DVD-RW 1.1 版 / 2X-SPEED (2X/1X)] （DVD-R 常規 2.
LSQT1022(TC_GC).book 21 ページ ２００６年２月７日 火曜日 午前１１時５９分 光碟和記憶卡 ≥ 不能用本機將靜態圖片拍攝在光碟上。 ≥ 當使用雙面光碟時，不能從光碟的一面到另一面連續拍攝或播放。需要彈出光碟並將其翻轉。 ≥ 不能使用插入到光碟抽屜、光碟盒或光碟匣中的光碟。 在使用之前，一定要從這些盒子中取出裸 碟。 ≥ 建議您使用 Panasonic 光碟。 一般情況下，可以用符合 DVD 標準的光碟來進行流暢地拍攝和重播。 但是，一些商業可用光碟在質量和性能上不符合 DVD 標準。如果您使用這些光碟當中的任何一 種，則可能無法進行正常地拍攝或重播。 （會出現 “建議使用 Panasonic 光碟”訊息。） 有關經 Panasonic 證實的可兼容光碟的資訊，請訪問下列支持網站。 http://panasonic.co.
LSQT1022(TC_GC).
LSQT1022(TC_GC).book 23 ページ ２００６年２月７日 火曜日 午前１１時５９分 光碟和記憶卡 本機可以使用的記憶卡 記憶卡類型 容量 SD 記憶卡 8 MB、16 MB、32 MB、64 MB、128 MB、256 MB、 512 MB、1 GB、2 GB （最大容量） (SD) 本說明書中的指示 寫保護開關 鎖定狀態 ≥ 讓記憶卡遠離兒童的接觸範圍，以防止兒童吞服。 ≥ 不能在本機上使用 MultiMediaCard。 使用之前 ≥ 不能用本機將動態影像拍攝在 SD 記憶卡上。 ≥ 請在下列網站上確認最新資訊。 （本網站僅為英文。） http://panasonic.co.
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).book 27 ページ ２００６年２月７日 火曜日 午前１１時５９分 電源 充電時間和可拍攝時間 下表中所示的時間是指溫度為 25 oC，濕度為 60% 時的時間。 如果溫度高於或低於 25 oC，則充電 時間將會變長。 ∫ 充電時間 ≥ 表中所示的充電時間為估計值。 ≥“2 h 25 min”表示 2 小時 25 分鐘。 電池型號 電壓／容量 充電時間 提供的電池／ CGA-DU12 （可選件） 7.2 V/1150 mAh 2 h 25 min CGA-DU14 （可選件） 7.2 V/1360 mAh 2 h 45 min CGA-DU21 （可選件） 7.
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).book 30 ページ ２００６年２月７日 火曜日 午前１１時５９分 電源 如何關閉電源 在按 A 按鈕的同時，將 OFF/ON 開關設定為 OFF。 當關閉電源時，狀態指示燈 B 會熄滅。 ≥ ( 僅 VDR-D300 型 ) 在光碟錄製模式或記憶卡拍攝模式中，鏡頭蓋會關閉。 A B 設定 當更換光碟或電池以後第一次開啟電源時，本機會執行識別程式以核實光碟沒有問題。 關於 DVD-RAM，該程式會花費約 25 秒的時間。 如果想一開啟電源就開始使用本機，按下列步驟操作。 1) 開啟電源。 2) “正在讀取光碟 ...
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).book 46 ページ ２００６年２月７日 火曜日 午前１１時５９分 設定日期和時間 設定日期和時間 當第一次開啟本機時，將出現一條要求您設定日期和時間的訊息。 ≥ 選擇 [ 是 ]，然後按下操縱桿。 執行下面的步驟 2 和 3 以設定日期和時間。 如果螢幕顯示出不正確的日期和時間，則請進行調整。 ¬ 轉動模式轉盤以選擇 或 。 1 按 MENU 按鈕，然後選擇 [ 基本功能 ] # [ 設定 ] # [ 是 ] 並按下操縱桿。 時鐘 2 左右移動操縱桿，選擇要設定的選項。然後，上下移 動操縱桿，設定想要的值。 ≥ 年份將按下列順序改變： 2000, 2001, ..., 2099, 2000, ...
LSQT1022(TC_GC).book 47 ページ ２００６年２月７日 火曜日 午前１１時５９分 設定日期和時間 ∫ 改變日期和時間顯示類型 按 MENU 按鈕，然後選擇 [ 設定 ] # [ 日期／時間 ] # 想要的顯 示類型，並按下操縱桿。 也可以通過反復按遙控器上的 DATE/TIME 按鈕來顯示或改變日期和時 間顯示。 [ 日期 ] [ 日期／時間 ] 15.12.2006 [關] 15:30 15.12.2006 ≥ 在光碟播放模式中，不顯示拍攝時間。 設定 ] # [ 日期格式 ] # 想要的顯示 顯示類型 年／月／日 月／日／年 日／月／年 螢幕顯示 15:30 2006.12.15 15:30 12.15.2006 15:30 15.12.
LSQT1022(TC_GC).
LSQT1022(TC_GC).book 49 ページ ２００６年２月７日 火曜日 午前１１時５９分 調整 LCD 顯示屏／取景器 ∫ 改變 LCD 顯示屏上的圖片質量 按 MENU 按鈕，然後選擇 [ 設定 ] # [ [ 動態 ] 或 [ 標準 ] 並按下操縱桿。 動態 : 標準 : LCD AI] # LCD 顯示屏上的影像變得清楚而生動。根據拍攝的 場景，設定最佳的對比度和亮度。再現出清晰而明亮 的影像。 切換到標準圖片質量。 ≥ 根據拍攝的場景，效果將發生變化。 ≥ 取景器上的圖片質量不會受到影響。 ≥ 當 LCD 顯示屏的亮度增大 （[ ] 指示出現在 LCD 顯示屏上）時，該功能會自動設定為 [ 動態 ]，並且 不能單獨設定為 [ 標準 ]。 ≥ 這將不影響錄製的影像。 ≥ 當將 LCD 顯示屏朝鏡頭方向旋轉 180° 時，[LCD AI]會 設定為 [ 標準 ]。 調整視野 15.12.2006 15.12.2006 15.12.
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).book 55 ページ ２００６年２月７日 火曜日 午前１１時５９分 拍攝靜態圖片 拍攝靜態圖片 (SD) 在 SD 記憶卡上拍攝靜態圖片。 ≥ 在購買本機時，[ 圖片尺寸 ] 被設定為 [ 2 ]（VDR-D300 型）／ [ 1.
LSQT1022(TC_GC).book 56 ページ ２００６年２月７日 火曜日 午前１１時５９分 拍攝靜態圖片 5 完全按下 PHOTO SHOT 按鈕。 ≥ 關於在 SD 記憶卡上可拍攝靜態圖片的數量，請參閱 (l 166) ≥ 當 [ 圖片尺寸 ] 設定為除 [ 0.
LSQT1022(TC_GC).
LSQT1022(TC_GC).book 58 ページ ２００６年２月７日 火曜日 午前１１時５９分 拍攝靜態圖片 錄製的靜態圖片的像素數和圖片質量 ∫ 圖片尺寸 改變錄製的尺寸。 按 MENU 按鈕，然後選擇 [ 基本功能 ] # [ 寸 ] # 想要的選項，並按下操縱桿。 VDR-D300 圖示 寬高比 像素數 3.1M 4:3 2048k1512 1M 4:3 1280k960 0.3M 4:3 640k480 16:9 1920k1080 2 VDR-D250 圖示 寬高比 像素數 2.3M 4:3 1760k1320 1M 4:3 1280k960 0.3M 4:3 640k480 16:9 1760k992 拍攝 1.7 58 LSQT1022 ≥ 在購買本機時，[ 圖片尺寸 ] 被設定為 [ 2 ] (VDR-D300)/[ 1.
LSQT1022(TC_GC).
LSQT1022(TC_GC).book 60 ページ ２００６年２月７日 火曜日 午前１１時５９分 各種拍攝功能 各種拍攝功能 放大／縮小功能 (RAM) (-RW‹VR›) (-RW‹V›) (-R) (SD) 光學放大可達 10k。 ¬ 轉動模式轉盤以選擇 或 。 移動變焦桿。 拍攝 T 側： W 側： 60 LSQT1022 特寫拍攝 （放大） 廣角拍攝 （縮小） ≥ 當手持本機將目標放大時，我們建議使用影像穩定 器功能。 (l 72) ≥ 當拉近遠距物體時，它們在約 1 m (VDR-D300 型 ) ／ 1.2 m (VDR-D250 型 ) 或更遠的距離被對焦。 ≥ 當變焦放大率為 1k 時，本機可以對距離鏡頭約 3.
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).book 80 ページ ２００６年２月７日 火曜日 午前１１時５９分 手動拍攝功能 手動快門速度／光圈調整 快門速度： 光圈： (RAM) (-RW‹VR›) (-RW‹V›) (-R) (SD) 當拍攝快速移動的物體時，請調整快門速度。 當螢幕太亮或太暗時，請調整光圈。 ¬ 轉動模式轉盤以選擇 或 。 MNL 1 將 AUTO/MANUAL/FOCUS 開關設定為 MANUAL。 自動顯示圖例中顯示的圖示。 4/4 NEXT 2 左右移動操縱桿以選擇 [ 速度）。 ] （光圈）或 [ ] （快門 MNL 4/4 NEXT 3 左右移動操縱桿進行調整。 A A 快門速度： 拍攝 1/50 到 1/8000 VDR-D300 1/25 到 1/2000 VDR-D250 1/25 到 1/500 ≥ 快門速度越接近 1/8000 速度越快。 B 光圈／增益值： CLOSE # (F16 到 F2.
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).book 111 ページ ２００６年２月７日 火曜日 午前１１時５９分 用電視機 ∫ 要在常規電視 (4:3) 上觀看寬高比為 16:9 的影像 當在寬高比為 4:3 的電視上重播用 16:9 寬高比錄製的動態影像 （[ 寬高比 ] 被設定為 [16:9]）或者 用 16:9 寬高比錄製的靜態圖片 （[ 圖片尺寸 ] 被設定為 [ 2 ] （VDR-D300 型）／ [ 1.
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).book 122 ページ ２００６年２月７日 火曜日 午前１１時５９分 和計算機一起使用之前 ≥ 即使本使用說明書中提到的系統需求全部滿足了，但是有些計算機可能還是無法使用。 ≥ 該軟體不能在 Macintosh 上使用。 ≥ 在安裝提供的軟體過程中，DirectX 9.0b 將被自動安裝。 ≥ 該軟體與多 CPU 環境不兼容。 ≥ 無法保證在 Microsoft Windows XP Media Center Edition、Tablet PC Edition 和 64-bit 操作系統上的 操作正常。 ≥ 根據您計算機環境的不同，如果它不支持 USB 2.0 （Hi-Speed），則在重播錄製的影像時可能發 生比如畫面丟失、聲音中斷或軟體運行緩慢等現象。 如果將 DVD-RAM 和 DVD-RW （VR 格式） 插入到計算機內部兼容 DVD-RAM/DVD-RW （VR 格式）的驅動器中，也可以使用。 用計算機 ∫ DVDfunSTUDIO 2.
LSQT1022(TC_GC).book 123 ページ ２００６年２月７日 火曜日 午前１１時５９分 和計算機一起使用之前 ≥ 即使本使用說明書中提到的系統需求全滿足了，但是有些計算機還是無法使用。 ≥ 該軟體不能在 Macintosh 上使用。 ≥ 在安裝提供的軟體過程中，DirectX 9.0b 將被自動安裝。 ≥ 在非預先安裝的操作系統中，無法保證操作正常。 ≥ 在不兼容的 PC/AT 計算機上，無法保證操作正常。 ≥ 不支持英語、德語、法語、義大利語、西班牙語和簡體中文以外的語言的輸入。 ≥ 無法保證在所有 DVD 驅動器上的操作正常。 ≥ 無法保證用本軟體創作的 DVD 光碟可在所有 DVD 播放機上播放。 ≥ 無法保證在 Microsoft Windows XP Media Center Edition 和 Tablet PC Edition 上的操作正常。 ≥ 該軟體不與 Microsoft Windows 3.
LSQT1022(TC_GC).book 124 ページ ２００６年２月７日 火曜日 午前１１時５９分 和計算機一起使用之前 終端用戶許可協議 打開 CD-ROM 包之前，請閱讀下列內容。 您 （“被許可者”）被授權許可使用本終端用戶軟體協議 （“協議”）中規定的軟體，前提是您同意 本協議中規定的條款和條件。 如果被許可者不同意本協議中的條款和條件，請儘快將軟體返回給 Matsushita Electric Industrial Co., Ltd.
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).book 127 ページ ２００６年２月７日 火曜日 午前１１時５９分 安裝 安裝 DVD-MovieAlbumSE 1 將 CD-ROM 插入到計算機中。 將出現 [Setup Menu] 螢幕。 ≥ 如果沒出現 [Setup Menu] 螢幕，請雙擊 [My Computer] 中的 CD-ROM 驅動 圖示。 2 單擊 [DVD-MovieAlbumSE 4.2]。 ≥ 如果在任何一點取消安裝，比如按 [Cancel]，則軟體應用程式不會正常運 行。 ≥ 根據操作環境的情況，可能需要安裝 DirectX 9.0b。 在這種情況下，單擊 [Yes]，然後安裝。 如果在與 DirectX 9.0b 或 9.
LSQT1022(TC_GC).book 128 ページ ２００６年２月７日 火曜日 午前１１時５９分 安裝 安裝 DVDfunSTUDIO 1 將 CD-ROM 插入到計算機中。 將出現 [Setup Menu] 螢幕。 ≥ 如果沒出現 [Setup Menu] 螢幕，請雙擊 [My Computer] 中的 CD-ROM 驅動 圖示。 2 單擊 [DVDfunSTUDIO 2.4]。 ≥ 如果在任何一點取消安裝，比如按 [Cancel]，則軟體應用程式不會正常運 行。 ≥ 根據操作環境的情況，可能需要安裝 DirectX 9.0b。 在這種情況下，單擊 [Yes]，然後安裝。 如果在與 DirectX 9.0b 或 9.
LSQT1022(TC_GC).book 129 ページ ２００６年２月７日 火曜日 午前１１時５９分 安裝 閱讀軟體應用程式的使用說明書 關於如何使用軟體應用程式的詳細情況，請閱讀 PDF 說明書。 ≥ 將需要 Adobe Acrobat Reader 5.
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).book 132 ページ ２００６年２月７日 火曜日 午前１１時５９分 連接和識別 ∫ 在記憶卡播放模式中（當存取記憶卡時） [Removable Disk] 顯示在 [My Computer] 中。 SD 記憶卡的資料夾結構的例子： Removable Disk DCIM 100CDPFP MISC ≥ JPEG 格式的靜態圖片 （IMGA0001.
LSQT1022(TC_GC).
LSQT1022(TC_GC).book 134 ページ ２００６年２月７日 火曜日 午前１１時５９分 在計算機上製作 DVD- 視頻光碟 在計算機上製作 DVD- 視頻光碟 在計算機上將 DVD-RAM 或 DVD-RW （VR 格式）製作成 DVD視頻 使用 DVD-MovieAlbumSE 和 DVDfunSTUDIO，可以將在本機上錄製的影像製作成一張 DVD- 視頻 光碟 （DVD-RW/DVD-R 光碟）。 ≥ 在計算機上使用 DVD-RW （VR 格式）之前，一定要在本機上將其封存。 ≥ 當使用 DVD-MovieAlbumSE 或 DVDfunSTUDIO 時，用管理員或與管理員具有相同權限的登錄名登 錄到您的計算機。 如果您用管理員以外的登錄名登錄，則您不能使用該應用程式。 ≥ 當軟體第一次啟動時，顯示終端用戶許可協議，因此請仔細閱讀其款項和條件，然後單擊 [I agree.
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).book 141 ページ ２００６年２月７日 火曜日 午前１１時５９分 指示 指示 指示 ∫ 拍攝指示 動態影像拍攝 R 0h00m 靜態圖片拍攝 0h00m00s 10× ; 2 10× R 100 MNL ; MEGA MNL AWB AWB 1/100 OPEN 3dB 15:30 15.12.2006 1/100 OPEN 3dB 15:30 15.12.2006 剩餘電池電量 1/100 快門速度 R 0h00m 剩餘拍攝時間 OPEN, F2.0 F值 0h00m00s 耗用拍攝時間 0dB 增益值 15:30 15.12.
LSQT1022(TC_GC).book 142 ページ ２００６年２月７日 火曜日 午前１１時５９分 指示 5 AWB 運動模式 肖像模式 低光模式 聚光燈模式 水上及雪地模式 自動白平衡 室內模式 （在白熾燈下拍攝） 室外模式 手動調整模式 光碟類型 DVD-RAM DVD-RW （VR 格式） DVD-RW （影片格式） DVD-RW （未格式化） DVD-R ß/ßi/ßj/ ßA/ßAi/ ßAj/ 閃光燈 （僅 VDR-D300 型） 紅眼降低 ( 僅 VDR-D300 型 ) ± （白色） ¥ （綠色） 連續攝影標記 Ø 自拍計時器拍攝 其他 MEGA 142 LSQT1022 MEGA OIS （僅 VDR-D300 型） 靜態圖片的拍攝像素數 VDR-D300 2048k1512 1920k1080 VDR-D250 1760k1320 1760k992 VDR-D300/VDR-D250 1280k960 640k480 3.1M 2 2.3M 1.7 1M 0.
LSQT1022(TC_GC).book 143 ページ ２００６年２月７日 火曜日 午前１１時５９分 指示 ∫ 重播指示 動態影像重播 靜態圖片重播 1 重播 ; 暫停 5/6 快進搜索／倒帶搜索重播 7/8 最後一個／第一個場景暫停 9/: 跳躍重播 D/E 慢動作重播 ;1/2; 逐格重播 0h00m00s 動態影像重播時間 播放模式 顯示光碟上的所有場景 顯示所選日期拍攝的場景 顯示所選播放列表中的場景 1M 0.3M 用其他產品拍攝的與以上所示的圖片尺寸不同 的靜態圖片的圖片尺寸不會顯示。 ∫ 確定的指示 –– （時 間顯示） 內置電池電量低。 (l 47) ° 投影片播放重播 當 LCD 顯示屏向鏡頭一側轉動 時，會出現警告／報警指示。將 LCD 顯示屏的方向返回到正常位 置，並檢查警告／報警指示。 靜態圖片資料夾／檔案號碼顯示 無光碟插入。 當連接與 PictBridge 兼容的印表 機時 光碟不可用 場景號碼 音量調整 R 2.3M 1.
LSQT1022(TC_GC).book 144 ページ ２００６年２月７日 火曜日 午前１１時５９分 指示 訊息 不能錄製。 向光碟或記憶卡寫入資料失敗。 無資料 光碟或記憶卡上沒有拍攝的影像。 不能兼容此光碟 插入了一張不兼容的光碟 （複製保護的光碟等）。 請檢查光碟。 插入了一張無法在本機上讀取的光碟 （以 NTSC 視頻格式錄製 的光碟等）。 建議使用 Panasonic 光碟 插入了一張質量和性能不符合 DVD 標準的光碟，因此無法進行 正常錄製。 有關經 Panasonic 證實的可兼容光碟的資訊，請訪問 下列支持網站。 http://panasonic.co.
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).book 159 ページ ２００６年２月７日 火曜日 午前１１時５９分 使用時的注意事項 ≥ SD 記憶卡標簽上標出的內存容量是版權保護 和管理的容量總和，此容量是可以在本機、計 算機等設備上使用的。 ≥ 在很長的使用過程中，本機表面和 SD 記憶卡 會輕微變熱。 這是正常現象。 當插入或取出 SD 記憶卡時，通常將 OFF/ON 開關設定為 OFF。 當本機存取 SD 記憶卡 （正顯示 或 ／存 取指示燈點亮）時，請不要取出 SD 記憶卡、操 作模式轉盤、關閉電源、振動或撞擊本機。） LCD 顯示屏／取景器 ≥ 當 LCD 顯示屏變髒，請用乾的軟布進行擦拭。 ≥ 當處於溫度急劇變化的環境中時，LCD 顯示屏 上會出現水汽凝結。 請用乾的軟布將其擦袪。 ≥ 當本機變得很涼時，比如由於在寒冷的地方存 放，在電源剛剛開啟以後，LCD 顯示屏會比 平時稍微暗些。 當本機的內部溫度昇高時，將 恢復到正常亮度。 LCD 顯示屏螢幕的製造採用了極高的精密技 術，總像素約達到 123,000。 約有超過 99.99% 的像素為有效像素，僅有約 0.
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).
LSQT1022(TC_GC).book 163 ページ ２００６年２月７日 火曜日 午前１１時５９分 規格 規格 DVD 攝錄放影機 安全注意事項 信號系統 CCIR： 625 線，50 格 PAL 彩色信號 錄製格式 DVD 錄影格式 （DVD-RAM、DVD-RW） DVD 影片格式 （DVD-RW、DVD-R） 影像感測器 1/6z 3CCD 影像感測器 總計： 800 Kk3 有效像素： VDR-D300 動態圖像： 630 Kk3 (4:3)、540 Kk3 (16:9) 靜態圖片： 710 Kk3 (4:3)、540 Kk3 (16:9) VDR-D250 動態圖像： 400 Kk3 (4:3)、380 Kk3 (16:9) 靜態圖片： 530 Kk3 (4:3)、400 Kk3 (16:9) 鏡頭 自動光圈，F1.8 到 F2.8 焦距： VDR-D300 3.0 mm 到 30.0 mm VDR-D250 2.45 mm 到 24.5 mm 微距 （全範圍 AF） 濾鏡直徑 37 mm 變焦 10k 光學變焦，25/700k 數位變焦 顯示屏 2.
LSQT1022(TC_GC).book 164 ページ ２００６年２月７日 火曜日 午前１１時５９分 規格 標準照度 1,400 lx 最低照度 12 lx (1 lx 帶全彩夜視功能 ) 視頻輸出標準 1.0 Vp-p, 75 ™ S 視頻輸出標準 Y： 1.0 Vp-p, 75 ™ C： 0.3 Vp-p, 75 ™ 音頻輸出標準 （線路） 316 mV, 600 ™ 麥克風輸入 麥克風靈敏度 j50 dB （0 dB=1 V/Pa，1 kHz） （立體聲小型插孔） USB 記憶卡讀／寫功能 （不支持版權保護） 適應 USB 2.0 （Hi-Speed） 兼容 PictBridge 動態影像傳輸 其他 閃光燈 （僅 VDR-D300 GN 4.
LSQT1022(TC_GC).book 165 ページ ２００６年２月７日 火曜日 午前１１時５９分 規格 動態影像 錄製媒體 8 cm DVD-RAM 2.1 版 8 cm DVD-RW 1.1/2X-SPEED (2X/1X) 版 8 cm DVD-R 常規 2.0 版 壓縮 MPEG2 拍攝模式和傳輸率 XP： 9 Mbps (VBR) （在單面的 DVD-RAM 上的錄製時間約是 18 min） SP： 5 Mbps (VBR) （在單面的 DVD-RAM 上的錄製時間約是 37 min） LP： 2.5 Mbps (VBR) （在單面的 DVD-RAM 上的錄製時間約是 75 min） 音頻壓縮 Dolby Digital （Dolby AC3），16 位 （48 kHz/2 ch） 靜態圖片 錄製媒體 SD 記憶卡 （8 MB/16 MB/32 MB/64 MB/128 MB/256 MB/512 MB/ 1 GB/2 GB （最大容量）） 壓縮 JPEG (Design rule for Camera File system，基於 Exif 2.
LSQT1022(TC_GC).book 166 ページ ２００６年２月７日 火曜日 午前１１時５９分 規格 SD 記憶卡上可拍攝的圖片數量 VDR-D300 圖片尺寸 3.1M (2048k1512) (1920k1080) 2 圖片質量 8 MB 3 5 4 7 16 MB 8 13 10 17 32 MB 18 29 24 39 64 MB 39 61 51 81 128 MB 75 120 98 155 256 MB 160 250 210 330 512 MB 320 490 410 650 1 GB 630 990 820 1290 2 GB 1290 2010 1680 2630 VDR-D250 其他 圖片尺寸 166 LSQT1022 2.3M (1760k1320) 1.
LSQT1022(TC_GC).book 167 ページ ２００６年２月７日 火曜日 午前１１時５９分 規格 VDR-D300 和 VDR-D250 1 M (1280k960) 0.
LSQT1022(ENG).book 168 ページ ２００６年１月３１日 火曜日 午後１０時２分 Left/Right As this equipment gets hot during use, operate it in a well-ventilated place; do not install this equipment in a confined space such as a bookcase or similar unit. To reduce the risk of fire, electric shock or product damage, do not expose this equipment to rain, moisture, dripping or splashing and ensure that no objects filled with liquids, such as vases, shall be placed on the equipment.
LSQT1022(ENG).book 169 ページ ２００６年１月３１日 火曜日 午後１０時２分 ENGLISH ∫ Indemnity concerning recording content The manufacturer shall in no event be liable for the loss of recordings due to malfunction or defect of this unit, its accessories or recordable media. ∫ Carefully observe copyright laws Recording of pre-recorded tapes or discs or other published or broadcast material for purposes other than your own private use may infringe copyright laws.
LSQT1022(ENG).book 170 ページ ２００６年１月３１日 火曜日 午後１０時２分 Contents Before using Recording Features ............................................ 172 Accessories ...................................... 174 Parts identification and handling.... 176 Before recording .............................. 216 Recording motion pictures ............. 218 Using the LCD monitor .......................... 182 Using the viewfinder .............................. 182 Using the remote control .......................
LSQT1022(ENG).book 171 ページ ２００６年１月３１日 火曜日 午後１０時２分 Editing With a computer Editing scenes.................................. 253 Before using with a computer .........284 Deleting scenes ..................................... 253 Dividing a scene .................................... 255 Combining scenes ................................. 256 What you can do with a computer......... 284 Contents on provided CD-ROM ............ 285 Operating environment .........................
LSQT1022(ENG).book 172 ページ ２００６年１月３１日 火曜日 午後１０時２分 Before using Features Features ∫ Easy recording! (l 218) Before using No need to search for the recording start position. The new recording will not overwrite any previously recorded scene. ∫ Easy playback! (l 247) Recorded scenes are displayed as thumbnails. You can easily search for the scenes you want to watch.
LSQT1022(ENG).book 173 ページ ２００６年１月３１日 火曜日 午後１０時２分 Features ∫ Using with DVD player/recorder! (l 278) ∫ Using with a computer! (l 284) You can enjoy editing scenes with the software on the supplied CD-ROM and creating original DVD-Video discs. Before using Just insert the disc into a DVD player/recorder compatible with 8 cm discs to play back the scenes recorded with this unit on it. If you have a DVD recorder with hard disk, you can dub scenes recorded on a disc with this unit to the hard disk.
LSQT1022(ENG).book 174 ページ ２００６年１月３１日 火曜日 午後１０時２分 Accessories Accessories Check the accessories before using this unit.
LSQT1022(ENG).book 175 ページ ２００６年１月３１日 火曜日 午後１０時２分 Accessories Optional accessories Some optional accessories may not be available in some countries.
LSQT1022(ENG).
LSQT1022(ENG).book 177 ページ ２００６年１月３１日 火曜日 午後１０時２分 Parts identification and handling 21 Accessory shoe 21 ≥ Accessories, such as a stereo microphone (optional), are attached here.
LSQT1022(ENG).book 178 ページ ２００６年１月３１日 火曜日 午後１０時２分 Parts identification and handling Using grip belt Adjust the belt length so it fits your hand. Adjust the belt length and the pad position. 1 Flip the belt. 2 Adjust the length. 3 Fix the belt. 2 1 3 Shoulder strap fixture Put the strap through the fixture 1 and through the stopper 2 so it will not come off. Extend part 3 by at least 2 cm.
LSQT1022(ENG).book 179 ページ ２００６年１月３１日 火曜日 午後１０時２分 Parts identification and handling Lens hood In order to remove the lens hood, rotate it counter-clockwise A. In order to fit it, place into slot B, and then rotate it clockwise C. ≥ (VDR-D300 only) The lens hood has a built-in lens cover. B A C ≥ When 2 lens accessories, such as the ND filter and tele conversion lens, are fitted and the W/T lever is pressed toward the W side, the 4 corners of an image will be darkened.
LSQT1022(ENG).book 180 ページ ２００６年１月３１日 火曜日 午後１０時２分 Parts identification and handling Fitting the lens cap (Supplied: VDR-D250 only)/(Included in the Filter Kit (VW-LF37WE; optional)) Fit the lens cap to protect the surface of the lens. ≥ When the MC protector or the ND filter of the Filter Kit (VW-LF37WE; optional) is attached to the front of the lens hood, use the lens cap included in the Filter Kit. 1 Pass the end of the lens cap cord through the belt.
LSQT1022(ENG).book 181 ページ ２００６年１月３１日 火曜日 午後１０時２分 Parts identification and handling Tripod receptacle Before using This is a hole for attaching the unit to the optional tripod. (Please carefully read the operating instructions for how to attach the tripod to the unit.) ≥ When the tripod is used, operate the unit from the free style remote control for convenience. (When not using the remote control, attach the clip to the grip belt for convenience.
LSQT1022(ENG).book 182 ページ ２００６年１月３１日 火曜日 午後１０時２分 Parts identification and handling Using the LCD monitor You can record the image while viewing it on the LCD monitor. 1 Place your finger on OPEN and pull the LCD monitor out in the direction of the arrow. ≥ It can open up to 90o. 2 Adjust the angle of the LCD monitor according to your preference. Before using ≥ It can rotate up to 180o A towards the lens or 90o B towards the viewfinder.
LSQT1022(ENG).
LSQT1022(ENG).book 184 ページ ２００６年１月３１日 火曜日 午後１０時２分 Parts identification and handling Caution Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the equipment manufacturer. Discard used batteries according to manufacturer’s instructions. Warning Risk of fire, explosion and burns. Do not recharge, disassemble, heat above 100 xC or incinerate. Keep the Button-Type battery out of the reach of children. Never put Button-Type battery in mouth.
LSQT1022(ENG).book 185 ページ ２００６年１月３１日 火曜日 午後１０時２分 Parts identification and handling Using the free style remote control (VDR-D300 only) This remote control can be used from different high and low angles. It is also handy when a tripod is used. When you do not use the remote control, attach the clip to the grip belt. Left-handed users can use this unit more easily.
LSQT1022(ENG).book 186 ページ ２００６年１月３１日 火曜日 午後１０時２分 Discs and cards Discs and cards Discs that can be used on this unit Before using DIsc type DVD-RAM 8 cm Single sided/ double sided DVD-RW 8 cm Single sided/double sided DVD-R 8 cm Single sided/ double sided (DVD-RAM Ver. 2.1) [DVD-RW Ver. 1.1/ 2X-SPEED (2X/1X)] (DVD-R for General Ver. 2.
LSQT1022(ENG).book 187 ページ ２００６年１月３１日 火曜日 午後１０時２分 Discs and cards ≥ Still pictures cannot be recorded on a disc with this unit. ≥ When using double sided disc, you cannot record or play continuously from one side of the disc to the other. You will need to eject the disc and turn it over. ≥ Discs inserted in a holder, cartridge, or caddy case cannot be used. Always remove bare discs from these containers prior to use. ≥ It is recommended that you use Panasonic discs.
LSQT1022(ENG).book 188 ページ ２００６年１月３１日 火曜日 午後１０時２分 Discs and cards When using brand-new DVD-RW When using DVD-RW, select whether to record in DVD Video Recording format (VR format) or DVD-Video format (Video format) and then format the disc. (l 187, About format types) 1 When a brand-new DVD-RW is inserted in this unit, the screen on the right appears. Select [YES], then press the joystick. 2 Select format type, then press the joystick.
LSQT1022(ENG).book 189 ページ ２００６年１月３１日 火曜日 午後１０時２分 Discs and cards Cards that you can use with this unit Card type SD Memory Card Capacity 8 MB, 16 MB, 32 MB, 64 MB, 128 MB, 256 MB, 512 MB, 1 GB, 2 GB (Maximum) Indication in these instructions ≥ Motion pictures cannot be recorded on an SD card with this unit. ≥ Please confirm the latest information on the following website. (This website is in English only.) http://panasonic.co.
LSQT1022(ENG).book 190 ページ ２００６年１月３１日 火曜日 午後１０時２分 Discs and cards Disc and card handling ∫ How to hold a disc or card Do not touch the recorded surface or the terminal surface. Before using ∫ If there is dirt on the disc Clean it with the supplied disc cleaning cloth. Wipe the disc from the centre to the outer edge to remove the dirt. Do not use force when wiping the disc as it may scratch it. Also, do not use solvents (thinner, water, antistatic agent, detergent etc.).
LSQT1022(ENG).book 191 ページ ２００６年１月３１日 火曜日 午後１０時２分 Setup Power supply Power supply Charging the battery When this unit is purchased, the battery is not charged. Charge the battery before using this unit. ≥ If the DC cable is connected to the AC adaptor, then the battery will not charge. Remove the DC cable from the AC adaptor. 1 Connect the AC cable to the AC adaptor and the AC outlet. 2 Put the battery on the battery mount by aligning the mark, and then securely plug it in.
LSQT1022(ENG).book 192 ページ ２００６年１月３１日 火曜日 午後１０時２分 Power supply Fitting the battery Push the battery against the battery holder and slide it until it clicks. Removing the battery While sliding the BATTERY RELEASE lever, slide the battery to remove it. Setup ≥ Hold the battery with your hand so it does not fall. 192 LSQT1022 ≥ Before removing the battery, be sure to set the OFF/ ON switch to OFF and check that the status indicator is off before removing the battery.
LSQT1022(ENG).book 193 ページ ２００６年１月３１日 火曜日 午後１０時２分 Power supply Charging time and recordable time The times shown in the tables below are for when the temperature is 25 oC and the humidity is 60%. If the temperature is higher or lower than 25 oC, the charging time will become longer. ∫ Charging time ≥ The charging time shown in the table are approximations. ≥ “2 h 25 min” indicates 2 hours 25 minutes. Battery model number Voltage/capacity Charging time Supplied battery/ CGA-DU12 (optional) 7.
LSQT1022(ENG).book 194 ページ ２００６年１月３１日 火曜日 午後１０時２分 Power supply VDR-D250 Battery model number Supplied battery/ CGA-DU12 (optional) CGA-DU14 (optional) Setup CGA-DU21 (optional) 194 LSQT1022 (When using a DVD-RAM disc) Voltage/ capacity 7.2 V/ 1150 mAh 7.2 V/ 1360 mAh 7.
LSQT1022(ENG).book 195 ページ ２００６年１月３１日 火曜日 午後１０時２分 Power supply Connecting to the AC outlet 1 Connect the AC cable to the AC adaptor and the AC outlet. 2 Connect the DC cable to the AC adaptor. 3 Connect the DC cable to this unit. ≥ Do not use the AC cable for other equipment since the AC cable is exclusively designed for this unit. Do not use the AC cable from other equipment for this unit. ≥ While the DC cable is connected to the AC adaptor, the battery will not charge.
LSQT1022(ENG).book 196 ページ ２００６年１月３１日 火曜日 午後１０時２分 Power supply How to turn off the power While pressing the button A, set the OFF/ON switch to OFF. The status indicator B goes off when the power turns off. ≥ (VDR-D300 only) In disc recording mode or card recording mode, the lens cover closes. Setup When the power is turned on for the first time after changing the disc or battery, the unit carries out a recognition procedure to check that there are no problems with the disc.
LSQT1022(ENG).book 197 ページ ２００６年１月３１日 火曜日 午後１０時２分 Power supply How to turn the power on and off with the LCD monitor/viewfinder When the OFF/ON switch is set to ON, the power can be turned on and off with the LCD monitor and the viewfinder when the unit is in disc recording mode or card recording mode. To turn on the power Open the LCD monitor or extend the viewfinder. The status indicator lights and the power turns on. To turn off the power Close the LCD monitor and retract the viewfinder.
LSQT1022(ENG).book 198 ページ ２００６年１月３１日 火曜日 午後１０時２分 Inserting/removing a disc Inserting/removing a disc When inserting or removing the disc, fit the charged battery pack or connect the AC adaptor to the unit. The cover of the disc compartment will not open unless the unit is powered. 1 Slide the DISC EJECT lever once and release it. A few moments after the ACCESS/PC lamp blinks, the cover of the disc compartment will open slightly.
LSQT1022(ENG).book 199 ページ ２００６年１月３１日 火曜日 午後１０時２分 Inserting/removing a disc ∫ Identifying recording/playback sides of disc Single sided disc: The recording/playback side is opposite to the labelled side. Double sided disc: The “SIDE A” recording/playback side is opposite to the “SIDE A” marked side. The “SIDE B” recording/playback side is the “SIDE A” marked side. D DV -RAM / SIDE A The opposite side is the “SIDE A” recording/ playback side.
LSQT1022(ENG).book 200 ページ ２００６年１月３１日 火曜日 午後１０時２分 Inserting/removing an SD card Inserting/removing an SD card Before inserting/removing an SD card, be sure to set the OFF/ON switch to OFF. If the SD card is inserted or removed while the OFF/ON switch is set to ON, this unit may malfunction or the data recorded on the SD card may be lost. 1 Set the OFF/ON switch to OFF to turn off the power. ≥ Check that the status indicator has gone off. 2 Open the card slot cover.
LSQT1022(ENG).book 201 ページ ２００６年１月３１日 火曜日 午後１０時２分 Selecting a mode Selecting a mode The mode dial is used to switch between recording and playback modes. Rotate the mode dial slowly but surely. Disc recording mode (l 218) Use this to record motion pictures on a disc. Disc playback mode (l 247) Use this to play back motion pictures on a disc. Card recording mode (l 221) Use this to record still pictures on an SD card. Card playback mode (l 251) Use this to play back still pictures on an SD card.
LSQT1022(ENG).book 202 ページ ２００６年１月３１日 火曜日 午後１０時２分 How to use the joystick How to use the joystick This unit has a joystick for selecting functions, performing operations, etc. so it is easy to operate this unit with one hand. Basic operations Operations on the menu screen and selection of files on the thumbnail view screen, etc. Move the joystick up, down, left, or right to select an item or scene, and then press the joystick to set it. 1 3 4 2 5 1 2 3 4 5 Select by moving up.
LSQT1022(ENG).book 203 ページ ２００６年１月３１日 火曜日 午後１０時２分 How to use the joystick Operations during playback ¬ Rotate the mode dial to select or . 1 Move the joystick up, down, left or right to select the scene to be played back and press the joystick. The selected scene is played back on the full screen. The operation icon is automatically displayed on the screen. 2 Move the joystick up, down, left or right to operate.
LSQT1022(ENG).
LSQT1022(ENG).
LSQT1022(ENG).
LSQT1022(ENG).book 207 ページ ２００６年１月３１日 火曜日 午後１０時２分 How to use the joystick ∫ Help mode The help mode explains the operation icons displayed when the AUTO/MANUAL/FOCUS switch is set to AUTO in disc/card recording mode. ¬ Rotate the mode dial to select or . 1 Press the joystick to display the icon during the recording pause. 1/3 NEXT 2 Move the joystick right to select [ ]. 1/3 NEXT 3 Move the joystick up, left or right to select the desired icon.
LSQT1022(ENG).book 208 ページ ２００６年１月３１日 火曜日 午後１０時２分 Switching the language Switching the language You can switch the language on the screen display or the menu screen. 1 Press the MENU button, then select [ LANGUAGE] and press the joystick. Setup 2 Select [English] and press the joystick.
LSQT1022(ENG).book 209 ページ ２００６年１月３１日 火曜日 午後１０時２分 Using the menu screen Using the menu screen Refer to “Menu list” (l 303) for information about the menus. 1 While stopped, press the MENU button. The menu displayed differs depending on the position of the mode dial. ≥ Do not switch the mode dial when the menu is displayed. MENU 2 Move the joystick up or down in order to select the desired top menu A. A 3 Move the joystick right or press the joystick.
LSQT1022(ENG).book 210 ページ ２００６年１月３１日 火曜日 午後１０時２分 Using the menu screen 5 Move the joystick right or press the joystick. 6 Move the joystick up or down in order to select the desired item. 7 Press the joystick to enter the selection. To get back to the previous screen Setup Move the joystick left. To exit the menu screen Press the MENU button. MENU ≥ The menu screen does not appear during recording or playing. You cannot start other operations while the menu screen appears.
LSQT1022(ENG).book 211 ページ ２００６年１月３１日 火曜日 午後１０時２分 Using the menu screen Operating with remote control The menu screen transition is the same as when the buttons on the main unit are used. 1 Press the MENU button. MENU ENTER 2 Select a menu item. ≥ Use the direction buttons (3,4,2,1) and ENTER button in place of the joystick on the main unit. MENU ENTER 3 Press the MENU button to exit the menu screen.
LSQT1022(ENG).book 212 ページ ２００６年１月３１日 火曜日 午後１０時２分 Setting date and time Setting date and time When the unit is turned on for the first time, a message asking you to set the date and time will appear. ≥ Select [YES] and press the joystick. Perform steps 2 and 3 below to set the date and time. If the screen shows the incorrect date and time, then adjust it. ¬ Rotate the mode dial to select or . 1 Press the MENU button, then select [ BASIC] # [ CLOCK SET] # [YES] and press the joystick.
LSQT1022(ENG).book 213 ページ ２００６年１月３１日 火曜日 午後１０時２分 Setting date and time ∫ Changing the date and time display style Press the MENU button, then select [ SETUP] # [ DATE/ TIME] # desired display style and press the joystick. You can also show or change the date and time display by repeatedly pressing the DATE/TIME button on the remote control. [DATE] 15.12.2006 [D/T] [OFF] 15:30 15.12.2006 ≥ The recording time is not displayed in disc playback mode.
LSQT1022(ENG).book 214 ページ ２００６年１月３１日 火曜日 午後１０時２分 Adjusting LCD monitor/viewfinder Adjusting LCD monitor/viewfinder Adjusting the brightness and colour level 1 Press the MENU button, then select [ SETUP] # [ LCD SET] or [ EVF EVF SET] # [YES] and press the joystick. 2 Move the joystick up or down to select the item to be adjusted. Then, move the joystick left or right to make the adjustment. The bar display moves.
LSQT1022(ENG).book 215 ページ ２００６年１月３１日 火曜日 午後１０時２分 Adjusting LCD monitor/viewfinder ∫ Changing the picture quality on the LCD monitor Press the MENU button, then select [ SETUP] # [ LCD AI] # [DYNAMIC] or [NORMAL] and press the joystick. DYNAMIC: NORMAL: The image on the LCD monitor becomes clear and vivid. Optimum contrast and brightness are set depending on the scenes recorded. Clear and brilliant images are presented. Switches to the standard picture quality.
LSQT1022(ENG).book 216 ページ ２００６年１月３１日 火曜日 午後１０時２分 Recording Before recording Before recording Basic camera positioning 1 4 3 2 Recording 5 216 LSQT1022 1 Hold the camera with both hands. 2 Run your hand through the grip belt. 3 Do not cover the microphones or sensors with your hands. 4 Keep your arms near your body. 5 Slightly open your legs. ≥ When you are outdoors, record pictures with the sunlight behind you. If the subject is backlit, it will become dark in the recording.
LSQT1022(ENG).book 217 ページ ２００６年１月３１日 火曜日 午後１０時２分 Before recording ∫ About auto mode Set the AUTO/MANUAL/FOCUS switch to AUTO, and colour balance (white balance) and focusing will be adjusted automatically. – Auto white balance (l 327) – Auto focusing (l 328) Depending on the brightness of the subject etc., the aperture and shutter speed are automatically adjusted for an optimum brightness. (When set to the disc recording mode: The shutter speed is adjusted to a maximum of 1/250.
LSQT1022(ENG).book 218 ページ ２００６年１月３１日 火曜日 午後１０時２分 Recording motion pictures Recording motion pictures (RAM) (-RW‹VR›) (-RW‹V›) (-R) Record motion pictures onto a disc. ≥ When the unit is purchased, the aspect ratio is set to [16:9] for recording images compatible with a wide-screen TV. To watch images on a regular TV (4:3), change the aspect ratio setting (l 237) before recording the images or when watching them on the connected TV (l 277).
LSQT1022(ENG).book 219 ページ ２００６年１月３１日 火曜日 午後１０時２分 Recording motion pictures To end the recording Press the recording start/stop button again to pause recording. ≥ [¥] and [;] are red during recording. Do not move this unit until [;] is green. ≥ The images recorded between pressing the recording start/stop button to start recording and pressing it again to pause recording become one scene.
LSQT1022(ENG).book 220 ページ ２００６年１月３１日 火曜日 午後１０時２分 Recording motion pictures Changing the recording mode of the motion picture Press the MENU button, then select [ BASIC] # [ REC MODE] # desired item and press the joystick. Recording modes and recordable time available for the motion picture Recording mode Recordable time (on single side) XP (High quality) Approx. 18 min SP (Normal) Approx. 37 min LP (Long play) Approx.
LSQT1022(ENG).book 221 ページ ２００６年１月３１日 火曜日 午後１０時２分 Recording still pictures Recording still pictures (SD) Record the still picture on an SD card. ≥ When this unit is purchased, [PICTURE SIZE] is set to [ 2 ] (VDR-D300)/[ 1.7 ] (VDR-D250) for recording pictures compatible with a wide-screen TV (16:9). To record pictures with a 4:3 aspect ratio, change the [PICTURE SIZE] setting before recording (l 224). ≥ (VDR-D250 only) Remove the lens cap before turning the unit on.
LSQT1022(ENG).book 222 ページ ２００６年１月３１日 火曜日 午後１０時２分 Recording still pictures 5 Press the PHOTO SHOT button fully. Recording ≥ For information about the number of recordable still pictures on an SD card (l 332) ≥ When the [PICTURE SIZE] is set to other than [ 0.3M ], the mega pixel recording mode is set. ≥ The sound cannot be recorded. ≥ If the write protection switch on the SD card is set to LOCK, it cannot be used for recording.
LSQT1022(ENG).book 223 ページ ２００６年１月３１日 火曜日 午後１０時２分 Recording still pictures Screen indications in card recording mode A Remaining number of still pictures (Flashes in red when [R 0] appears.) B Size of still pictures C Quality of still pictures A R 100 B C ≥ The shutter chance mark does not appear or has difficulty displaying in the following cases. – When the zoom magnification is high. – When the unit is shaken. – When the subject is moving. – When the subject stands in front of a light source.
LSQT1022(ENG).book 224 ページ ２００６年１月３１日 火曜日 午後１０時２分 Recording still pictures Number of pixels and picture quality for still picture recording ∫ PICTURE SIZE Changing the recording size. Press the MENU button, then select [ BASIC] # [ PICTURE SIZE] # desired item and press the joystick. VDR-D300 Icon Aspect Number of pixels 3.1M 4:3 2048k1512 1M 4:3 1280k960 0.3M 4:3 640k480 16:9 1920k1080 Icon Aspect Number of pixels 2.3M 4:3 1760k1320 1M 4:3 1280k960 0.
LSQT1022(ENG).book 225 ページ ２００６年１月３１日 火曜日 午後１０時２分 Recording still pictures ∫ PICT. QUALITY Selecting the picture quality. Press the MENU button, then select [ BASIC] # [ PICT. QUALITY] # desired item and press the joystick. : Still pictures with a high picture quality are recorded. : Priority is given to the number of still pictures recorded. Still pictures are recorded in normal picture quality. Switching the shutter effect on/off You can add a shutter sound when recording still pictures.
LSQT1022(ENG).book 226 ページ ２００６年１月３１日 火曜日 午後１０時２分 Various recording functions Various recording functions Zoom in/out function (RAM) (-RW‹VR›) (-RW‹V›) (-R) (SD) You can zoom in up to 10k optically. ¬ Rotate the mode dial to select or . Move the zoom lever. Recording T side: Close-up recording (zoom in) W side: Wide-angle recording (zoom out) 226 LSQT1022 ≥ When zooming in while holding this unit by hand, we recommend using the image stabilizer function.
LSQT1022(ENG).book 227 ページ ２００６年１月３１日 火曜日 午後１０時２分 Various recording functions Digital zoom function (RAM) (-RW‹VR›) (-RW‹V›) (-R) If the zoom magnification exceeds 10k, then the digital zoom function will be activated. The maximum magnification provided by the digital zoom can be switched. ¬ Rotate the mode dial to select . Press the MENU button, then select [ ADVANCED] # [ D.ZOOM] # desired item and press the joystick.
LSQT1022(ENG).book 228 ページ ２００６年１月３１日 火曜日 午後１０時２分 Various recording functions Recording yourself (RAM) (-RW‹VR›) (-RW‹V›) (-R) (SD) You can record yourself while viewing the LCD monitor. You can record persons in front of the unit while showing them the image. ¬ Rotate the mode dial to select or . Rotate the LCD monitor towards the lens side. The image is horizontally flipped as if you see a mirror image. (However the image recorded is the same as a normal recording.
LSQT1022(ENG).book 229 ページ ２００６年１月３１日 火曜日 午後１０時２分 Various recording functions Backlight compensation function This is for protecting a backlit subject from being darkened. (RAM) (-RW‹VR›) (-RW‹V›) (-R) (SD) Use this function when the light is emanating from behind the subject and the subject appears dark. ¬ Rotate the mode dial to select or . 1 Press the joystick. Then move the joystick down to display the icon shown in the illustration. 1/3 NEXT 2 Move the joystick up to select [ª].
LSQT1022(ENG).book 230 ページ ２００６年１月３１日 火曜日 午後１０時２分 Various recording functions Fade in/fade out function (RAM) (-RW‹VR›) (-RW‹V›) (-R) Fade in: The image and audio gradually appear. Fade out: The image and audio gradually disappear. ¬ Rotate the mode dial to select . To fade in 1 While recording is paused, press the joystick. Then move the joystick down to display the icon shown in the illustration. 2 Move the joystick left to select [ 1/3 NEXT ]. 1/3 NEXT 3 Press the recording start/stop button.
LSQT1022(ENG).book 231 ページ ２００６年１月３１日 火曜日 午後１０時２分 Various recording functions 2 Move the joystick left to select [ ]. 3 Press the recording start/stop button. Pause recording. (Fade out) The image/audio gradually disappears. After the image/audio completely disappears, recording stops. ≥ After recording, the fade setting is cancelled. To cancel fading Select [ ] again. To select the colour for fade in/out The colour which appears in fading pictures can be selected.
LSQT1022(ENG).book 232 ページ ２００６年１月３１日 火曜日 午後１０時２分 Various recording functions Soft skin mode This makes skin colours appear softer for a more attractive appearance. (RAM) (-RW‹VR›) (-RW‹V›) (-R) (SD) This is more effective if you record the bust image of a person. ¬ Rotate the mode dial to select or . 1 Press the joystick. Then move the joystick down to display the icon shown in the illustration. 2 Move the joystick left to select [ 2/3 NEXT ].
LSQT1022(ENG).book 233 ページ ２００６年１月３１日 火曜日 午後１０時２分 Various recording functions Tele macro function This is for bringing only what you want to record into focus to take close-ups. (RAM) (-RW‹VR›) (-RW‹V›) (-R) (SD) By focusing only on the subject and blurring the background, the image can be impressive. VDR-D300 The unit can focus on the subject at a distance of approx. 50 cm. VDR-D250 The unit can focus on the subject at a distance of approx. 40 cm. ¬ Rotate the mode dial to select or .
LSQT1022(ENG).book 234 ページ ２００６年１月３１日 火曜日 午後１０時２分 Various recording functions Colour night view functions This allows recording in dark locations. (RAM) (-RW‹VR›) (-RW‹V›) (-R) This function allows you to record colour subjects in dark locations to stand out against the background. Attach this unit to a tripod, and you can record images free from vibration. ≥ Only manual focusing can be used. ≥ Recorded scene is seen as if frames were missed.
LSQT1022(ENG).book 235 ページ ２００６年１月３１日 火曜日 午後１０時２分 Various recording functions Self-timer recording This is for recording shots of yourself as well. (SD) You can record still pictures on an SD card using the timer. ¬ Rotate the mode dial to select . 1 Press the joystick. Then move the joystick down to display the icon shown in the illustration. 1/2 NEXT 2 Move the joystick left to select [Ø]. 1/2 NEXT 3 Press the PHOTO SHOT button. To stop the timer midway through Press the MENU button.
LSQT1022(ENG).book 236 ページ ２００６年１月３１日 火曜日 午後１０時２分 Various recording functions Wind noise reduction function This is for reducing the wind noise coming into the microphone when recording. (RAM) (-RW‹VR›) (-RW‹V›) (-R) ¬ Rotate the mode dial to select . Press the MENU button, then select [ BASIC] # [ WIND CUT] # [ON] and press the joystick. To cancel the wind noise reduction function Press the MENU button, then select [ joystick. BASIC] # [ Recording ≥ This function’s default setting is [ON].
LSQT1022(ENG).book 237 ページ ２００６年１月３１日 火曜日 午後１０時２分 Various recording functions Wide mode This is for selecting the screen’s aspect ratio when recording motion pictures. (RAM) (-RW‹VR›) (-RW‹V›) (-R) This allows you to record images compatible with wide-screen TVs (16:9) and regular TVs (4:3). ∫ Recording images with a 16:9 aspect ratio ¬ Rotate the mode dial to select . Press the MENU button, then select [ BASIC] > [ REC ASPECT] > [16:9] and press the joystick.
LSQT1022(ENG).book 238 ページ ２００６年１月３１日 火曜日 午後１０時２分 Various recording functions Image stabilizer function This is for reducing image shakes during recording. VDR-D300 (RAM) (-RW‹VR›) (-RW‹V›) (-R) (SD) VDR-D250 (RAM) (-RW‹VR›) (-RW‹V›) (-R) Reduces the image shaking due to hand movement when recording. ∫ VDR-D300 ¬ Rotate the mode dial to select or . Press the MENU button, then select [ ADVANCED] # [ O.I.S.] # [ON] and press the joystick.
LSQT1022(ENG).book 239 ページ ２００６年１月３１日 火曜日 午後１０時２分 Various recording functions Built-in flash (VDR-D300 only) (SD) Use the built-in flash in order to record still pictures in dark places. ¬ Rotate the mode dial to select . 1 Press the MENU button, then select [ ADVANCED] > [ß FLASH] > desired item and press the joystick. ß: Forced flash ßA: Auto ≥ When [ßA] is set, the ambient brightness is automatically detected, and only when the flash is judged necessary will it flash.
LSQT1022(ENG).book 240 ページ ２００６年１月３１日 火曜日 午後１０時２分 Various recording functions Red eye reduction function Reduces the phenomena where human eyes become red from flashes. Press the MENU button, then select [ ADVANCED] # [ RED EYE] # [ON] and press the joystick. ≥ The flash is activated 2 times. Do not move until the second flash is finished. ≥ Use this when you take pictures of people in dark places. ≥ Red eye phenomenon may appear depending on the recording conditions.
LSQT1022(ENG).book 241 ページ ２００６年１月３１日 火曜日 午後１０時２分 Manual recording functions Manual recording functions Scene mode This is for recording in various situations. (RAM) (-RW‹VR›) (-RW‹V›) (-R) (SD) When you record images in different situations, this mode automatically sets optimum shutter speeds and apertures. ¬ Rotate the mode dial to select . or 1 Set the AUTO/MANUAL/FOCUS switch to MANUAL.
LSQT1022(ENG).book 242 ページ ２００６年１月３１日 火曜日 午後１０時２分 Manual recording functions To cancel the scene mode function Press the MENU button, then select [ BASIC] # [ SCENE MODE] # [OFF] and press the joystick. ≥ You can also cancel the scene mode function by setting the AUTO/MANUAL/FOCUS switch to AUTO. Recording Sports mode ≥ For slow-motion playback or playback pause of recorded pictures, this mode helps diminish camera shake. ≥ During normal playback, the image movement may not look smooth.
LSQT1022(ENG).book 243 ページ ２００６年１月３１日 火曜日 午後１０時２分 Manual recording functions Manual focus adjustment (RAM) (-RW‹VR›) (-RW‹V›) (-R) (SD) If auto focusing is difficult due to the conditions, then manual focusing is available. ¬ Rotate the mode dial to select or . 1 Set the AUTO/MANUAL/FOCUS switch to MANUAL. 2 Move the switch down and set it to FOCUS position. MNL The manual focus indication [1MF] and the icon shown in the illustration appear.
LSQT1022(ENG).book 244 ページ ２００６年１月３１日 火曜日 午後１０時２分 Manual recording functions White balance This is for recording in natural colours. (RAM) (-RW‹VR›) (-RW‹V›) (-R) (SD) The automatic white balance function may not reproduce natural colours depending on the scenes or lighting conditions. If so, you can adjust the white balance manually. ¬ Rotate the mode dial to select or . MNL 1 Set the AUTO/MANUAL/FOCUS switch to MANUAL. 4/4 NEXT The icon shown in the illustration is displayed automatically.
LSQT1022(ENG).book 245 ページ ２００６年１月３１日 火曜日 午後１０時２分 Manual recording functions To set the white balance manually 1 Select [ ], fill the screen with a white subject. MNL BACK 2 Move the joystick up to select [ When the [ complete. ]. ] display changes from flashing to on, setting is ≥ When the [ ] display continues flashing green, the white balance cannot be set because the place is dark etc. In this case, use the automatic white balance.
LSQT1022(ENG).book 246 ページ ２００６年１月３１日 火曜日 午後１０時２分 Manual recording functions Manual shutter speed/aperture adjustment Shutter Speed: Aperture: (RAM) (-RW‹VR›) (-RW‹V›) (-R) (SD) Adjust it when recording fast-moving subjects. Adjust it when the screen is too bright or too dark. ¬ Rotate the mode dial to select or . MNL 1 Set the AUTO/MANUAL/FOCUS switch to MANUAL. 4/4 NEXT The icon shown in the illustration is displayed automatically.
LSQT1022(ENG).book 247 ページ ２００６年１月３１日 火曜日 午後１０時２分 Playback Motion picture playback Motion picture playback (RAM) (-RW‹VR›) (-RW‹V›) (-R) Play back the motion pictures recorded on the disc. 1 Rotate the mode dial to select . The motion pictures recorded on the disc are displayed as thumbnails. ≥ (VDR-D300 only) The lens cover closes. 2 Select the scene to be played back. A Scene number B Scroll bar display The selected scene will be encircled by a red frame.
LSQT1022(ENG).book 248 ページ ２００６年１月３１日 火曜日 午後１０時２分 Motion picture playback ≥ No sound will be heard except during normal playback. ≥ If pause play is continued for 5 minutes, the screen returns to the thumbnails. ≥ When the amount of time recorded on the scene is short, playback may not be possible. ≥ The thumbnails of motion pictures that cannot be played back are displayed in shades of blue and white. ≥ The power will not turn off when the LCD monitor and the viewfinder are closed and retracted.
LSQT1022(ENG).book 249 ページ ２００６年１月３１日 火曜日 午後１０時２分 Motion picture playback Frame-by-frame playback The motion picture is advanced one frame at a time. 1 Move the joystick up during playback to pause the playback. 2 Move the joystick right. (The frames will be advanced one at a time in the reverse direction when you move the joystick left.) ≥ Normal playback is restored when you move the joystick up. ∫ Operating with the remote control 1 Press the ; button. 2 Press the E or D button.
LSQT1022(ENG).book 250 ページ ２００６年１月３１日 火曜日 午後１０時２分 Motion picture playback Playing back motion pictures by date Recorded scenes are grouped by date on this unit. Scenes recorded on the same day can be played back in succession. 1 Press the MENU button, then select [ PLAY SETUP] # [ PLAY MODE] # [BY DATE] and press the joystick. ≥ When [PLAY MODE] is set to [VIEW ALL], all recorded motion pictures will be played back in succession. ([ ALL] is displayed.
LSQT1022(ENG).book 251 ページ ２００６年１月３１日 火曜日 午後１０時２分 Still picture playback Still picture playback (SD) Play back the still pictures recorded on the card. 1 Rotate the mode dial to select . The still pictures recorded on the SD card are displayed as thumbnails. ≥ (VDR-D300 only) The lens cover closes. 2 Select the file to be played back. A File number B Scroll bar display The selected file will be encircled by a red frame.
LSQT1022(ENG).book 252 ページ ２００６年１月３１日 火曜日 午後１０時２分 Still picture playback Playing back still pictures as a slide show Press the MENU button, then select [ PLAY SETUP] # [ PLAY MODE] # [SLIDE SHOW] and press the joystick. ∫ About still picture compatibility ≥ This unit is compliant with the unified standard DCF (Design rule for Camera File system) established by JEITA (Japan Electronics and Information Technology Industries Association). ≥ The file format supported by this unit is JPEG.
LSQT1022(ENG).book 253 ページ ２００６年１月３１日 火曜日 午後１０時２分 Editing Editing scenes Editing scenes Deleting scenes This is for deleting scenes recorded on discs. (RAM) (-RW‹VR›) The deleted scenes cannot be restored. ≥ Scenes on DVD-RW (Video format) and DVD-R cannot be deleted. Deleting scenes one at a time ¬ Rotate the mode dial to select 1 Press the . button during playback. Editing 2 When the confirmation message appears, select [YES], then press the joystick.
LSQT1022(ENG).book 254 ページ ２００６年１月３１日 火曜日 午後１０時２分 Editing scenes Deleting multiple scenes from the thumbnail display ¬ Rotate the mode dial to select . 1 Press the MENU button, then select [ DELETE] # [ SELECT] or [ ALL] and press the joystick. ≥ When [ALL] is selected, the following scenes will be deleted. Proceed to step 4.
LSQT1022(ENG).book 255 ページ ２００６年１月３１日 火曜日 午後１０時２分 Editing scenes Dividing a scene This is for dividing a scene into two. (RAM) (-RW‹VR›) To delete unnecessary portion of scene, first divide the scene, and then delete the unnecessary portion. ¬ Rotate the mode dial to select . 1 Press the MENU button, then select [ EDIT SCENE] # [ DIVIDE] and press the joystick. 2 Select the scene to be divided, then press the joystick. The selected scene is played back.
LSQT1022(ENG).book 256 ページ ２００６年１月３１日 火曜日 午後１０時２分 Editing scenes Combining scenes This function is only for combining two consecutive scenes into one. (RAM) (-RW‹VR›) ¬ Rotate the mode dial to select . 1 Press the MENU button, then select [ EDIT SCENE] # [ COMBINE] and press the joystick. 2 Select the scene to be combined, then press the joystick. ≥ The selected scene and the next scene are combined.
LSQT1022(ENG).book 257 ページ ２００６年１月３１日 火曜日 午後１０時２分 Using playlists Using playlists What is a playlist? You can create a playlist by gathering your favourites from the recorded scenes. Since the playlist is not created by copying data, you will consume little of the disc capacity by making a playlist. ≥ If you create or delete playlists, the original scenes will not be modified. Editing scenes on a playlist will not affect the original scenes.
LSQT1022(ENG).book 258 ページ ２００６年１月３１日 火曜日 午後１０時２分 Using playlists Creating a new playlist (RAM) (-RW‹VR›) ¬ Rotate the mode dial to select . 1 Press the MENU button, then select [ PLAY SETUP] # [ PLAY MODE] # [PLAYLIST] and press the joystick. 2 Select [CREATE], then press the joystick. 3 Select the scene to be added to the playlist, then press the joystick. The selected scene is encircled by a yellow frame. ≥ When the joystick is pressed again, the selected scene will be cancelled.
LSQT1022(ENG).book 259 ページ ２００６年１月３１日 火曜日 午後１０時２分 Using playlists Playing back a playlist (RAM) (-RW‹VR›) ¬ Rotate the mode dial to select . 1 Press the MENU button, then select [ PLAY SETUP] # [ PLAY MODE] # [PLAYLIST] and press the joystick. 2 Select the playlist to be played back, then press the joystick. Scenes in the selected playlist are displayed as thumbnails. 3 Select the scene to start playback, then press the joystick.
LSQT1022(ENG).book 260 ページ ２００６年１月３１日 火曜日 午後１０時２分 Using playlists Editing a playlist (RAM) (-RW‹VR›) Editing scenes on a playlist will not affect the original scenes. Adding scenes to playlist ¬ Select playlist playback mode. (l 259, steps 1 and 2) 1 Press the MENU button, then select [ press the joystick. EDIT] and 2 Select the playlist to be edited, then press the joystick. Editing 3 Select [ ADD], then press the joystick. 4 Select the scene to be added, then press the joystick.
LSQT1022(ENG).book 261 ページ ２００６年１月３１日 火曜日 午後１０時２分 Using playlists Moving scenes The scenes in a playlist can be moved. ¬ Select playlist playback mode. (l 259, steps 1 and 2) 1 Press the MENU button, then select [ press the joystick. EDIT] and 2 Select the playlist to be edited, then press the joystick. 3 Select [ MOVE], then press the joystick. 4 Select the scene to be moved, then press the joystick. 5 Select the position to insert the scene, then press the joystick.
LSQT1022(ENG).book 262 ページ ２００６年１月３１日 火曜日 午後１０時２分 Using playlists Dividing a scene You can divide a scene into two parts. ≥ Dividing scenes on a playlist will not affect the original scenes. ¬ Select playlist playback mode. (l 259, steps 1 and 2) 1 Press the MENU button, then select [ press the joystick. EDIT] and 2 Select the playlist to be edited, then press the joystick. 3 Select [ DIVIDE], then press the joystick. 4 Select the scene to be divided, then press the joystick.
LSQT1022(ENG).book 263 ページ ２００６年１月３１日 火曜日 午後１０時２分 Using playlists Combining scenes Two consecutive scenes can be combined into one. ≥ Combining scenes on a playlist will not affect the original scenes. ¬ Select playlist playback mode. (l 259, steps 1 and 2) 1 Press the MENU button, then select [ press the joystick. EDIT] and 2 Select the playlist to be edited, then press the joystick. 3 Select [ COMBINE], then press the joystick. 4 Select the scene to be combined, then press the joystick.
LSQT1022(ENG).book 264 ページ ２００６年１月３１日 火曜日 午後１０時２分 Using playlists Deleting scenes ≥ Deleting scenes on a playlist will not affect the original scenes. Deleting scenes one at a time: ¬ Select playlist playback mode. (l 259, steps 1 and 2) 1 Press the button during playback. 2 When the confirmation message appears, select [YES], then press the joystick. Deleting multiple scenes from the thumbnail display: ¬ Select playlist playback mode.
LSQT1022(ENG).book 265 ページ ２００６年１月３１日 火曜日 午後１０時２分 Using playlists 3 Select [ DELETE] # [ press the joystick. SELECT] or [ ALL] and ≥ When [ALL] is selected, the selected playlist will be erased. Proceed to step 6. 4 (Only when [SELECT] is selected in step 3) Select the scene to be deleted, then press the joystick. The selected scene is encircled by a yellow frame. ≥ When the joystick is pressed again, the selected scene will be cancelled.
LSQT1022(ENG).book 266 ページ ２００６年１月３１日 火曜日 午後１０時２分 Editing still pictures Editing still pictures Deleting still pictures This is for deleting still picture files recorded on SD cards. (SD) The deleted files cannot be restored. Deleting files one at a time ¬ Rotate the mode dial to select 1 Press the . button during playback. Editing 2 When the confirmation message appears, select [YES], then press the joystick.
LSQT1022(ENG).book 267 ページ ２００６年１月３１日 火曜日 午後１０時２分 Editing still pictures Deleting multiple files from the thumbnail display ¬ Rotate the mode dial to select . 1 Press the MENU button, then select [ DELETE] # [ SELECT] or [ ALL] and press the joystick. ≥ When [ALL] is selected, all files on the SD card except the locked files will be erased. Proceed to step 4. 2 (Only when [SELECT] is selected in step 1) Select the file to be deleted, then press the joystick.
LSQT1022(ENG).book 268 ページ ２００６年１月３１日 火曜日 午後１０時２分 Editing still pictures Locking still pictures This is for preventing still picture files from being deleted by mistake. (SD) Still picture files recorded on an SD card can be locked so that they may not be deleted by mistake. (However even if you lock some files on an SD card, formatting the card will delete all the files.) ¬ Rotate the mode dial to select . 1 Press the MENU button, then select [ PLAY SETUP] # [ LOCK] # [YES] and press the joystick.
LSQT1022(ENG).book 269 ページ ２００６年１月３１日 火曜日 午後１０時２分 Editing still pictures DPOF setting This is for writing the printing data on an SD card. (SD) You can write the data of still pictures to be printed and number of copies (DPOF data) onto the SD card. ¬ Rotate the mode dial to select . 1 Press the MENU button, then select [ PLAY SETUP] # [ DPOF SET] # [SET] and press the joystick. 2 Select the file to be set, then press the joystick. The number of prints set to be in DPOF is displayed.
LSQT1022(ENG).book 270 ページ ２００６年１月３１日 火曜日 午後１０時２分 Disc and card management Formatting discs and cards Formatting discs and cards Formatting discs This is for initializing discs. (RAM) (-RW‹VR›) (-RW‹V›) Please be aware that if a disc is formatted, then all the data recorded on the disc will be erased. ¬ Rotate the mode dial to select . 1 Press the MENU button, then select [ SETUP] # [ FORMAT DISC] # [YES] and press the joystick. ≥ When formatting a DVD-RAM, skip to step 3.
LSQT1022(ENG).book 271 ページ ２００６年１月３１日 火曜日 午後１０時２分 Formatting discs and cards Formatting an SD card This is for initializing cards. (SD) Please be aware that if an SD card is formatted, then all the data recorded on the card will be erased. Store important data on a computer, etc. ¬ Rotate the mode dial to select . 1 Press the MENU button, then select [ SETUP] # [ FORMAT CARD] # [YES] and press the joystick. 2 When the confirmation message appears, select [YES], then press the joystick.
LSQT1022(ENG).book 272 ページ ２００６年１月３１日 火曜日 午後１０時２分 Finalizing a disc Finalizing a disc Finalizing a disc This is for enabling discs to be played on other devices. (-RW‹VR›) (-RW‹V›) (-R) To play back a DVD-RW (Video format) or a DVD-R on other devices e.g. a DVD player, finalize the disc. ∫ Finalizing video format discs Be sure to finalize the disc on this unit, before using it on other devices. DVD-RW (Video format): After finalizing, the disc becomes play-only.
LSQT1022(ENG).book 273 ページ ２００６年１月３１日 火曜日 午後１０時２分 Finalizing a disc Un-finalizing a DVD-RW This is for un-finalizing a DVD-RW (Video format) so that it can be used for recording. (-RW‹V›) ¬ Rotate the mode dial to select . 1 Press the MENU button, then select [ SETUP] # [ UN-FINALIZE] # [YES] and press the joystick. 2 When the confirmation message appears, select [YES], then press the joystick. ≥ When un-finalizing is complete, press the MENU button to exit the message screen.
LSQT1022(ENG).book 274 ページ ２００６年１月３１日 火曜日 午後１０時２分 Protecting a disc Protecting a disc (RAM) (-RW‹VR›) This is for preventing recorded contents from being deleted or edited by mistake. Further recording and editing is not possible on protected discs until the protection is released. ¬ Rotate the mode dial to select . 1 Press the MENU button, then select [ SETUP] # [ DISC PROTECT] and press the joystick. 2 When the confirmation message appears, select [YES], then press the joystick.
LSQT1022(ENG).book 275 ページ ２００６年１月３１日 火曜日 午後１０時２分 Displaying disc information Displaying disc information (RAM) (-RW‹VR›) (-RW‹V›) (-R) Information such as the number of recorded scenes, the remaining space and whether or not the disc is finalized or protected is displayed. ¬ Rotate the mode dial to select . Press the MENU button, then select [ SETUP] # [ INFORMATION] # [YES] and press the joystick. To exit the information screen Disc and card management Press the MENU button.
LSQT1022(ENG).book 276 ページ ２００６年１月３１日 火曜日 午後１０時２分 With other products With a TV With a TV Playback on TV (RAM) (-RW‹VR›) (-RW‹V›) (-R) (SD) The motion pictures and still pictures recorded by this unit can be played back on a TV. ≥ Use the AC adaptor to free you from worrying about the battery running down. 1 Connect this unit and a TV. A AV/S cable (supplied) ≥ Insert the plugs as far as they will go. A * If the TV has an S Video terminal, also connect the S Video plug to it.
LSQT1022(ENG).book 277 ページ ２００６年１月３１日 火曜日 午後１０時２分 With a TV ∫ To watch images with a 16:9 aspect ratio on a regular TV (4:3) When playing back motion pictures recorded with a 16:9 aspect ratio ([REC ASPECT] was set to [16:9]) or still pictures recorded with a 16:9 aspect ratio ([PICTURE SIZE] was set to [ 2 ] (VDR-D300)/[ 1.7 ] (VDR-D250)) on a TV with a 4:3 aspect ratio, the images may be squeezed horizontally.
LSQT1022(ENG).book 278 ページ ２００６年１月３１日 火曜日 午後１０時２分 With a DVD recorder/player With a DVD recorder/player Playback on DVD recorder/player ≥ When playing back a disc on a DVD recorder/player, place the device so that the disc lies flat. Playing back a DVD-RAM or a DVD-RW (VR format) (RAM) (-RW‹VR›) Insert the disc in the DVD recorder/player, then play it back. ≥ Playback is only possible on devices that support 8 cm DVD-RAM or DVD-RW (VR format). See the operating instructions for DVD recorder/player.
LSQT1022(ENG).book 279 ページ ２００６年１月３１日 火曜日 午後１０時２分 With a DVD recorder/player Copying recordings onto a DVD recorder’s hard disk (RAM) (-RW‹VR›) (-RW‹V›) (-R) If you have a DVD recorder with hard disk, images recorded by this unit can be stored on the hard disk. ≥ If you want to dub a disc that the DVD recorder is not compatible with, connect this unit and the DVD recorder with the AV/S cable and then dub the disc.
LSQT1022(ENG).book 280 ページ ２００６年１月３１日 火曜日 午後１０時２分 With a VCR With a VCR Dubbing images onto other video devices (RAM) (-RW‹VR›) (-RW‹V›) (-R) You can dub images played back on this unit onto other video devices. You can create a playlist by gathering the scenes you want to dub, then dub the scenes in this playlist only to other devices. (l 258) ≥ Use the AC adaptor to free you from worrying about the battery running down. 1 Connect this unit and a video device.
LSQT1022(ENG).book 281 ページ ２００６年１月３１日 火曜日 午後１０時２分 With a printer (PictBridge) With a printer (PictBridge) (SD) To print pictures by directly connecting this unit to the printer, use a printer compatible with PictBridge. (Read the operating instructions for the printer.) ≥ Use the AC adaptor to free you from worrying about the battery running down. ¬ Insert an SD card with recorded images in the unit, turn on the unit and then rotate the mode dial to select .
LSQT1022(ENG).book 282 ページ ２００６年１月３１日 火曜日 午後１０時２分 With a printer (PictBridge) 4 Move the joystick up or down to select the desired number of prints, then press the joystick. ≥ You can set up to 9 prints. ≥ To cancel the setting, set the number of prints to [0]. ≥ Up to 8 files displayed on a page can be set in succession by repeating steps 3 and 4. 5 Press the MENU button to display the PictBridge menus. 6 Select the date print setting on [ DATE PRINT].
LSQT1022(ENG).book 283 ページ ２００６年１月３１日 火曜日 午後１０時２分 With a printer (PictBridge) 8 Select the layout setting on [ PAGE LAYOUT]. STANDARD: Layout specific to the printer : No frame print : Frame print ≥ You cannot set page layouts not supported on the printer. 9 Select [ PRINT] # [YES] and press the joystick. The pictures are printed. ≥ Exit PictBridge by disconnecting the USB cable after the pictures have been printed. When you stop printing halfway Move the joystick down.
LSQT1022(ENG).book 284 ページ ２００６年１月３１日 火曜日 午後１０時２分 With a computer Before using with a computer Before using with a computer What you can do with a computer ∫ When using a DVD-RAM or DVD-RW (VR format) recorded on this unit ≥ Before using DVD-RW (VR format) on a computer, be sure to finalize it on this unit.
LSQT1022(ENG).book 285 ページ ２００６年１月３１日 火曜日 午後１０時２分 Before using with a computer Contents on provided CD-ROM The following software applications are contained on the provided CD-ROM. ∫ DVD-RAM Driver This is necessary to configure the unit as a drive on a computer. DVDForm: This is used to format DVD-RAM on a computer. ∫ DVD-MovieAlbum DVD-MovieAlbumSE: This software is for playing back and editing* VR format motion pictures.
LSQT1022(ENG).book 286 ページ ２００６年１月３１日 火曜日 午後１０時２分 Before using with a computer ∫ DVDfunSTUDIO This software is for creating a DVD-Video disc. Use this software when burning a DVD-Video disc from motion pictures edited using DVD-MovieAlbumSE. For details, refer to page 300. 1 2 3 DVD-RW/ DVD-R DVD-RAM/ DVD-RW(VR) A DVD-Video B C 1 Export the images from a DVD-RAM or DVD-RW (VR format) with DVD-MovieAlbumSE.
LSQT1022(ENG).book 287 ページ ２００６年１月３１日 火曜日 午後１０時２分 Before using with a computer Operating environment ≥ A CD-ROM drive is necessary to install the supplied software applications. ≥ When 2 or more USB devices are connected to a computer, or when devices are connected through USB hubs or by using extension cables, proper operation is not guaranteed. ≥ Use the supplied USB cable when connecting to the computer. (Operation is not guaranteed with any other USB cables.
LSQT1022(ENG).book 288 ページ ２００６年１月３１日 火曜日 午後１０時２分 Before using with a computer ≥ Even if the system requirements mentioned in these operating instructions are fulfilled, some computers cannot be used. ≥ This software can not be used on Macintosh. ≥ DirectX 9.0b will be installed automatically during installation of the supplied software. ≥ This software is not compatible with a multi-CPU environment.
LSQT1022(ENG).book 289 ページ ２００６年１月３１日 火曜日 午後１０時２分 Before using with a computer ≥ Even if the system requirements mentioned in these operating instructions are fulfilled, some computers cannot be used. ≥ This software can not be used on Macintosh. ≥ DirectX 9.0b will be installed automatically during installation of the supplied software. ≥ Operation on an OS other than the one pre-installed is not guaranteed. ≥ Operation is not guaranteed on computers that are not PC/AT compatible.
LSQT1022(ENG).book 290 ページ ２００６年１月３１日 火曜日 午後１０時２分 Before using with a computer End User License Agreement Before opening the CD-ROM package, please read the following. You (“Licensee”) are granted a license for the Software defined in this End User Software Agreement (“Agreement”) on condition that you agree to the terms and conditions of this Agreement. If Licensee does not agree to the terms and conditions of this Agreement, promptly return the Software to Matsushita Electric Industrial Co., Ltd.
LSQT1022(ENG).book 291 ページ ２００６年１月３１日 火曜日 午後１０時２分 Installation Installation When installing the software, log on to your computer as the Administrator or with a user name with equivalent authorization. (If you do not have authorization to do this, consult your manager.) Do not connect the USB cable before installing the DVD-RAM Driver. If the DVD-RAM Driver is installed after connecting this unit and the computer with the USB cable, this unit may not be correctly recognized by the computer.
LSQT1022(ENG).book 292 ページ ２００６年１月３１日 火曜日 午後１０時２分 Installation 5 Read carefully through the End User License Agreement (l 290), then click [Yes]. ≥ You cannot install the application if you click [No]. 6 Click [Next]. Continue to follow the on-screen messages to install it. 7 When installation is complete, some notes will appear: Check the contents, then click [k] at the top right of window. 8 Click [Finish].
LSQT1022(ENG).book 293 ページ ２００６年１月３１日 火曜日 午後１０時２分 Installation Installing DVD-MovieAlbumSE 1 Insert the CD-ROM into the computer. The [Setup Menu] screen will appear. ≥ If the [Setup Menu] screen does not appear, double-click the CD-ROM drive icon in [My Computer]. 2 Click [DVD-MovieAlbumSE 4.2]. ≥ The software application may not run properly if you cancel the installation at any point e.g. by pressing [Cancel]. ≥ Depending on the operating environment, you may be required to install DirectX 9.0b.
LSQT1022(ENG).book 294 ページ ２００６年１月３１日 火曜日 午後１０時２分 Installation Installing DVDfunSTUDIO 1 Insert the CD-ROM into the computer. The [Setup Menu] screen will appear. ≥ If the [Setup Menu] screen does not appear, double-click the CD-ROM drive icon in [My Computer]. 2 Click [DVDfunSTUDIO 2.4]. ≥ The software application may not run properly if you cancel the installation at any point e.g. by pressing [Cancel]. ≥ Depending on the operating environment, you may be required to install DirectX 9.0b.
LSQT1022(ENG).book 295 ページ ２００６年１月３１日 火曜日 午後１０時２分 Installation Reading the operating instructions of the software applications For details on how to use the software applications, read the PDF instructions. ≥ You will need Adobe Acrobat Reader 5.0 or later to read the PDF operating instructions. (l 286) ∫ DVD-RAM Driver Select [start] # [All Programs (Programs)] # [DVD-RAM] # [DVD-RAM Driver] # [Using DVD-RAM disc].
LSQT1022(ENG).book 296 ページ ２００６年１月３１日 火曜日 午後１０時２分 Connection and recognition Connection and recognition Connection and recognition procedures After the driver and software applications are installed, the unit must be connected to the computer and be correctly recognized by the computer. ≥ Connect after installing the driver and software applications. ≥ If the supplied CD-ROM is inserted in the computer, remove it. (If the [Setup Menu] is running, wait until it finishes, then remove the CD-ROM.
LSQT1022(ENG).book 297 ページ ２００６年１月３１日 火曜日 午後１０時２分 Connection and recognition ≥ When the unit is connected to a computer, the operation mode cannot be changed and its power cannot be turned off. In this case, disconnect the USB cable (l 298). ≥ When the unit is connected to a computer in disc playback mode, no image will appear on the LCD monitor or viewfinder. ≥ When this unit is connected to a computer, you cannot use this unit’s DISC EJECT lever to remove a disc.
LSQT1022(ENG).book 298 ページ ２００６年１月３１日 火曜日 午後１０時２分 Connection and recognition ∫ In card playback mode (When accessing the card) [Removable Disk] is displayed in [My Computer]. Example folder structure of an SD card: Removable Disk DCIM 100CDPFP MISC ≥ JPEG format still pictures (IMGA0001.JPG etc.) are stored in the [100CDPFP] folder. These can be opened with picture software that supports JPEG pictures. ≥ Up to 999 files can be recorded in the [100CDPFP] or other such folder.
LSQT1022(ENG).book 299 ページ ２００６年１月３１日 火曜日 午後１０時２分 Connection and recognition Verifying the unit is correctly recognized by the computer To verify the unit is correctly recognized by the computer, select the unit’s mode, connect the unit to the computer via the USB cable and then follow the steps below. ≥ With some computers including those made by NEC, the Device Manager may not be displayed if a mode that places restrictions on the functions has been established.
LSQT1022(ENG).book 300 ページ ２００６年１月３１日 火曜日 午後１０時２分 Creating a DVD-Video disc on a computer Creating a DVD-Video disc on a computer Creating a DVD-Video on a computer from a DVD-RAM or DVD-RW (VR format) Using DVD-MovieAlbumSE and DVDfunSTUDIO, you can create a DVD-Video disc (DVD-RW/ DVD-R disc) from the images recorded on this unit. ≥ Before using DVD-RW (VR format) on a computer, be sure to finalize it on this unit.
LSQT1022(ENG).book 301 ページ ２００６年１月３１日 火曜日 午後１０時２分 Creating a DVD-Video disc on a computer 3 (On the computer) Select [start] # [All Programs (Programs)] # [Panasonic] # [DVD-MovieAlbumSE] # [DVD-MovieAlbumSE]. DVD-MovieAlbumSE starts and the images recorded on the disc are displayed. When starting DVD-MovieAlbumSE, the [Mount Information] dialogue box may appear or the recorded images may not be shown. If this occurs, try the following procedure.
LSQT1022(ENG).book 302 ページ ２００６年１月３１日 火曜日 午後１０時２分 Creating a DVD-Video disc on a computer 8 Insert a brand-new DVD-RW or DVD-R disc into the unit. 9 When the [CollectTool] screen appears, click [OK]. The exported scene will be automatically registered on the DVDfunSTUDIO editing screen. 10 Edit the DVD menu as required. ≥ Set the disc size to [8 cm DVD]. 11 Click [Burning]. Writing to the disc starts. When writing is complete, the disc is ejected automatically.
LSQT1022(ENG).book 303 ページ ２００６年１月３１日 火曜日 午後１０時２分 Others Menus Menus Menu list Motion picture recording menus Still picture recording menus ∫ [ [ [ [ [ [ ∫ [ [ [ [ [ [ [ ∫ [ BASIC] SCENE MODE] (l 241) WIND CUT] (l 236) REC MODE] (l 220) REC ASPECT] (l 237) CLOCK SET] (l 212) ADVANCED] D.ZOOM] (l 227) O.I.S.
LSQT1022(ENG).
LSQT1022(ENG).book 305 ページ ２００６年１月３１日 火曜日 午後１０時２分 Menus Other menus ∫ [ DISPLAY] ≥ OFF ≥ ON The screen indications are selected as shown in the illustration below. OFF ; ON SP R 0h00m 0h00m00s ; ∫ [ POWER SAVE] ≥ OFF ≥ 5 MINUTES [OFF]: The power saving function is not activated. [5 MINUTES]: When about 5 minutes passed without any operation, this unit automatically turns off to prevent the battery from running down. When you use this unit, turn it on again.
LSQT1022(ENG).book 306 ページ ２００６年１月３１日 Menus ∫ [ JOYSTICK LED] ≥ OFF ≥ ON If set to [ON], the circumference of the joystick lights up in blue during operation. Others ∫ [ DEMO DEMO MODE] ≥ OFF ≥ ON This item is used to start the unit demonstration. (Only when using the AC adaptor and the mode dial is at the or position) If you set this to [ON] without inserting a disc or an SD card, this unit is automatically set to the demonstration mode for introducing its functions.
LSQT1022(ENG).book 307 ページ ２００６年１月３１日 火曜日 午後１０時２分 Indications Indications Indications ∫ Recording indications Motion picture recording R 0h00m 0h00m00s 10× Still picture recording ; 2 10× R 100 MNL ; MEGA MNL AWB AWB 1/100 OPEN 3dB 15:30 15.12.2006 1/100 OPEN 3dB 15:30 15.12.2006 Remaining battery power 1/100 Shutter speed R 0h00m Remaining time for recording OPEN, F2.0 F number 0h00m00s Elapsed recording time 0dB Gain value 15:30 15.12.
LSQT1022(ENG).
LSQT1022(ENG).book 309 ページ ２００６年１月３１日 火曜日 午後１０時２分 Indications ∫ Playback indications 1 Playback ; Pause 5/6 Cue/Review playback 7/8 Last/first scene paused 9/: Skip playback D/E Slow motion playback ;1/2; Frame-by-frame playback Still picture playback 0h00m00s Motion picture playback time Play mode All scenes on the disc displayed Scenes recorded on the selected date displayed Scenes in the selected playlist displayed No.10 Scene number Volume adjustment R Resume playback 3.1M 2 2.
LSQT1022(ENG).book 310 ページ ２００６年１月３１日 火曜日 午後１０時２分 Indications Messages CANNOT RECORD. Data writing to the disc or card has failed. NO DATA. There are no images recorded on the disc or card. INCOMPATIBLE DISC. You inserted an incompatible disc (copy-protected discs, etc.). PLEASE CHECK THE DISC. You inserted a disc that cannot be read on this unit (a disc recorded in NTSC video format etc.). FOR BEST PERFORMANCE PANASONIC DISC IS RECOMMENDED.
LSQT1022(ENG).book 311 ページ ２００６年１月３１日 火曜日 午後１０時２分 Indications DVD-R cannot be un-finalized. CANNOT UN-FINALIZE THIS DISC. DVD-RW (VR format) cannot be un-finalized. DVD-RW (VR format) after finalization can be recorded and edited in the same way as DVD-RW (VR format) before finalization. CHECK CARD. This card is not compatible or it cannot be recognized by the unit. CARD LOCKED. The write protection switch on the SD Memory Card is set to LOCK. (l 189) CARD FULL.
LSQT1022(ENG).book 312 ページ ２００６年１月３１日 火曜日 午後１０時２分 Indications About recovery It is possible that the system cannot complete writing of a file normally when, for example, power is turned off for some reason during recording or editing. If faulty management information is found when a disc is accessed, the following message may appear. Be sure to follow the messages. (Repairing may take time depending on the error.) DISC ERROR HAS OCCURRED.
LSQT1022(ENG).book 313 ページ ２００６年１月３１日 火曜日 午後１０時２分 Functions that cannot be used simultaneously Functions that cannot be used simultaneously Some functions in this unit are disabled or cannot be selected due to the unit’s specifications. The table below shows examples of functions restricted by various conditions.
LSQT1022(ENG).book 314 ページ ２００６年１月３１日 火曜日 午後１０時２分 Frequently asked questions Others Frequently asked questions 314 LSQT1022 What kind of discs can be used? DVD-RAM, DVD-RW and DVD-R can be used if they are 8 cm bare discs. (l 186) Can discs with a cartridge be used? They can be used if the cartridge is removed. Can double sided discs be used? They can be used. However you cannot record or play continuously from one side of the disc to the other.
LSQT1022(ENG).book 315 ページ ２００６年１月３１日 火曜日 午後１０時２分 Can software other than that supplied be used? For information about software from other companies, contact the makers of the software. Is playback possible on a computer? DVD-RAM, DVD-RW (VR format): Use the supplied software DVD-MovieAlbumSE. ≥ Before using DVD-RW (VR format) on a computer, be sure to finalize it on this unit.
LSQT1022(ENG).book 316 ページ ２００６年１月３１日 火曜日 午後１０時２分 Troubleshooting Troubleshooting Unit operations Problem This unit cannot be turned on. ≥ Is the battery fully charged? # Charge the battery using the AC adaptor. (l 191) ≥ The battery protection circuit may have operated. Attach the battery to the AC adaptor for 5 to 10 seconds. If the unit still cannot be used, the battery is faulty. ≥ Is the LCD monitor opened or the viewfinder extended? This unit is turned off automatically.
LSQT1022(ENG).book 317 ページ ２００６年１月３１日 火曜日 午後１０時２分 Problem Check points The screen has changed suddenly. ≥ Has the demonstration started? # If you set [DEMO MODE] to [ON] without inserting a disc or a card in disc recording mode or card recording mode, the unit is automatically set to the demonstration mode for introducing its functions. Normally this should be set to [OFF]. Press the MENU button, then select [SETUP] # [DEMO MODE] # [OFF] and press the joystick. The remote control does not function.
LSQT1022(ENG).book 318 ページ ２００６年１月３１日 火曜日 午後１０時２分 Troubleshooting Problem Recording starts but stops immediately. The playback picture breaks up for a moment. Others 318 ≥ Is the disc scratched or dirty? # Clean the disc. (l 190) ≥ The unit is hot. Follow the messages on the display. To use the unit again, turn the unit off and leave it for a while. The unit arbitrarily stops recording. ≥ Is the AGS function activated? # Record in the normal horizontal position or set [AGS] to [OFF].
LSQT1022(ENG).book 319 ページ ２００６年１月３１日 火曜日 午後１０時２分 Troubleshooting Problem Check points Scenes cannot be deleted or edited. ≥ Is the DVD-RAM or the DVD-RW (VR format) writeprotected? # Release the protection. (l 274) If the disc or the contents on the disc have been protected on another device, release the protection on the same device. ≥ It may not be possible to delete scenes that have been divided. # Combine the divided scenes, and then delete them.
LSQT1022(ENG).book 320 ページ ２００６年１月３１日 火曜日 午後１０時２分 Troubleshooting Problem Check points ≥ The unit has automatically detected an error. Press the RESET button with the projecting part of the grip belt A. This will restart the unit. “PUSH THE RESET SWITCH.” is displayed. A ≥ If you do not press the RESET button, the power to this unit is turned off automatically about 1 minute later. ≥ Even after you press the RESET button, the indication may still appear repeatedly. If so, this unit needs repair.
LSQT1022(ENG).book 321 ページ ２００６年１月３１日 火曜日 午後１０時２分 Troubleshooting Problem Check points An image that should have been recorded does not appear when DVD-MovieAlbumSE is started. ≥ If there are multiple drives, a drive other than this unit may be selected. # Click the [Preference] button at top right of DVD-MovieAlbumSE screen, click the [Device setting] tab to choose the drive where the disc is loaded in the [Drive Select] column, and then click [OK].
LSQT1022(ENG).book 322 ページ ２００６年１月３１日 火曜日 午後１０時２分 Cautions for use Cautions for use About this unit ≥ The unit, disc and card become warm after long operation, but this is not a malfunction. Keep the unit away from magnetized products/mobile phones, microwave ovens, TVs and video game products. ≥ If you use the unit on or near a TV, the images or sound may be disturbed due to electromagnetic wave radiation.
LSQT1022(ENG).book 323 ページ ２００６年１月３１日 火曜日 午後１０時２分 Cautions for use Do not use a commercial available 8 cm CD lens cleaner. ≥ Using 8 cm CD lens cleaner could cause this unit to malfunction. Do not use the unit for surveillance purposes or other business uses. ≥ If you use the unit for a long time, heat will build up inside it and this may cause a malfunction. ≥ This unit is not intended for business use.
LSQT1022(ENG).book 324 ページ ２００６年１月３１日 火曜日 午後１０時２分 Cautions for use About the AC adaptor ≥ If the battery is warm, charging requires more time than normal. ≥ If the temperature of the battery is extremely high or extremely low, the CHARGE lamp may continue flashing, and the battery may not be charged. Wait until the appropriate temperature is restored before charging the battery again. If the battery still fails to charge, something may be wrong with the battery or AC adaptor. Contact your dealer.
LSQT1022(ENG).book 325 ページ ２００６年１月３１日 火曜日 午後１０時２分 Cautions for use ≥ The memory capacity indicated on the label of an SD card is the total of the capacity for copyright protection and management and the capacity which can be used on the unit, a computer etc. ≥ During prolonged use, the unit’s surfaces and the SD card will heat up slightly. This is normal. When inserting or removing the SD card, always set the OFF/ON switch to OFF.
LSQT1022(ENG).book 326 ページ ２００６年１月３１日 Cautions for use About condensation When condensation forms on the unit, the lens will cloud up and the unit may not work properly. Make every effort to ensure that condensation does not form. If it does form, take the actions described below. Causes of condensation Condensation takes place when the ambient temperature or humidity is changed as follows. ≥ When this unit is brought inside from the cold (e.g. a ski slope) to a warm room.
LSQT1022(ENG).book 327 ページ ２００６年１月３１日 火曜日 午後１０時２分 Explanation of terms Explanation of terms Automatic white balance White balance adjustment recognizes the colour of light and adjusts so the white colour will become a purer white. The unit determines the hue of light that comes through the lens and white balance sensor, thereby judging the recording condition, and selects the closest hue setting. This is called automatic white balance adjustment.
LSQT1022(ENG).book 328 ページ ２００６年１月３１日 火曜日 午後１０時２分 Explanation of terms Auto focus The lens is moved forward or backward automatically to bring the subject into focus. Auto focus has the following characteristics. ≥ Adjusts so that the vertical lines of a subject are seen more clearly. ≥ Attempts to bring an object with higher contrast into focus. ≥ Focuses on the screen centre only. Due to these characteristics, auto focus does not work correctly in the following situations.
LSQT1022(ENG).book 329 ページ ２００６年１月３１日 火曜日 午後１０時２分 Specifications Specifications DVD Video Camera Information for your safety DC 7.9 V/7.2 V Recording (When using a DVD-RAM disc and the recording mode is [SP].) VDR-D300 Approx. 4.6 W (When using viewfinder) Approx. 4.9 W (When using LCD monitor) VDR-D250 Approx. 4.4 W (When using viewfinder) Approx. 4.
LSQT1022(ENG).book 330 ページ ２００６年１月３１日 火曜日 午後１０時２分 Others Specifications 330 LSQT1022 Standard illumination 1,400 lx Minimum required illumination 12 lx (1 lx with the colour night view function) Video output level 1.0 Vp-p, 75 ™ S Video output level Y: 1.0 Vp-p, 75 ™ C: 0.3 Vp-p, 75 ™ Audio output level (Line) 316 mV, 600 ™ Mic input Mic sensitivity j50 dB (0 dB=1 V/Pa, 1 kHz) (Stereo mini jack) USB Card reader/writer function (No copyright protection support) USB 2.
LSQT1022(ENG).book 331 ページ ２００６年１月３１日 火曜日 午後１０時２分 Specifications Motion pictures Recording media 8 cm DVD-RAM Ver. 2.1 8 cm DVD-RW Ver. 1.1/2X-SPEED (2X/1X) 8 cm DVD-R for General Ver. 2.0 Compression MPEG2 Recording mode and transfer rate XP: 9 Mbps (VBR) (Approx. 18 min recordable time on a single-sided DVD-RAM) SP: 5 Mbps (VBR) (Approx. 37 min recordable time on a single-sided DVD-RAM) LP: 2.5 Mbps (VBR) (Approx.
LSQT1022(ENG).book 332 ページ ２００６年１月３１日 火曜日 午後１０時２分 Specifications Number of recordable pictures on an SD card VDR-D300 Picture size 3.1M (2048k1512) (1920k1080) 2 Picture quality 8 MB 3 5 4 7 16 MB 8 13 10 17 32 MB 18 29 24 39 64 MB 39 61 51 81 128 MB 75 120 98 155 256 MB 160 250 210 330 512 MB 320 490 410 650 1 GB 630 990 820 1290 2 GB 1290 2010 1680 2630 VDR-D250 Picture size 2.3M (1760k1320) 1.
LSQT1022(ENG).book 333 ページ ２００６年１月３１日 火曜日 午後１０時２分 Specifications VDR-D300 and VDR-D250 Picture size 1 M (1280k960) 0.
LSQT1022(ENG).
２００６年１月３１日 火曜日 午後１０時２分 Others LSQT1022(ENG).
LSQT1022(ENG).book 336 ページ ２００６年１月３１日 火曜日 午後１０時２分 Backcover C LSQT1022 A F0206Nt0 ( 4000 A ) Matsushita Electric Industrial Co., Ltd. Web site: http://www.panasonic.co.
