DVD Video Camera Specification Sheet
English
VQT0K98
84
Note:
• The PHOTO Input setting can be confirmed using the on-
screen information.
• The PHOTO Input setting will be stored in memory even
when the DVD Video Camera is turned off.
• Refer to “Recording (Dubbing) Images” on page 71 to
see how to connect the DVD Video Camera to another
device.
• “PHOTO Input” is displayed only when “Input Source” is
set to “LINE”.
• “OSD Output” is displayed only when “Input Source” is set
to “CAMERA”.
13
Self-Timer
You can record photos using the self timer function, as with ordinary cameras.
1 Press the MENU button,
choose “Self Timer” on
the “Record Functions
Setup” menu screen, and
then press the A
button.
2 Select “On”, and then press the A button.
The self-timer will be set.
3 Press the MENU button to end the setting.
4 Press the REC button.
The recording indicator at the front of DVD Video
Camera will blink.
The self-timer indicator will start to count down,
and recording will commence approximately 10
seconds later.
Note:
• You can also check that self-timer has been set by
reviewing the on-screen information.
• To release the self-timer mode, choose “Off” on the menu
screen or turn DVD Video Camera off.
• To suspend self-timer, press the REC button again
before recording starts, or press the
C button.
• “PHOTO Input” is displayed only when “Input Source” is
set to “LINE”.
• “OSD Output” is displayed only when “Input Source” is
set to “CAMERA”.
The self timer function is valid only when recording photos (stills).
Se l f T i mer
Record Func t i ons Setup
On
Of f
RAM
OSD Ou t p u t
Input Source
ENTER RETURN
10
999
REM
8 : 00AM
SEP
30
2004
Self-timer recording
252
ENG_03.fm Page 84 Wednesday, March 24, 2004 2:52 PM