DVD Video Camera Specification Sheet

English

VQT0K98

About the Battery Pack

Attaching Battery to DVD Video Camera

1 Fit the battery to the battery attachment platform

on this DVD Video Camera and slide it upward

until a click is heard.

Note:

• Make sure that the battery is in the correct orientation.

• Make sure that the battery is securely attached:

Incomplete attachment could cause the battery to fall,

resulting in damage.

Removing Battery

After using the DVD Video Camera, remove the battery from it.

1 Slide the BATTERY EJECT switch on the bottom

of DVD Video Camera: The battery can be

removed.

2 Slide the battery pack downward to remove it.

Note:

• For safety, be sure to turn the DVD Video Camera off

before attaching or removing the battery.

• Be careful not to drop the removed battery.

• If the battery remains attached, minute level current will

flow even if the DVD Video Camera is off, and the battery

will discharge.

Terminal

must

face up.

208

ENG.book Page 40 Tuesday, March 23, 2004 8:12 PM