DVD Video Camera Specification Sheet

English

VQT0K98

Viewing Image on LCD Monitor Screen

If you open the LCD monitor, you can monitor subject image on the LCD screen.

1 Open the LCD monitor.

The LCD monitor has a portion where you can

hook your finger. Hook the finger there to open

the monitor.

●Range where the LCD monitor can

be moved

The LCD monitor can be opened up to

approximately 90°.

If the LCD monitor is open 90°, it can be tilted with

the screen down as much as 90°, and can also be

tilted with screen up and turned up to 180° so the

screen faces in the same direction as the lens.

If the LCD monitor is turned 180° so the screen

faces in the same direction as the lens during

recording, subject image will also appear in the

viewfinder as an mirror image (left/right reversed).

Tilt the LCD monitor to adjust its vertical angle so

that you can see the screen easily.

Note:

• If no image appears on LCD monitor screen, refer to

“Check 7” on page 144.

• Be sure to open the LCD monitor approximately 90°

before changing its vertical angle.

• Do not record for a prolonged time with the LCD monitor

turned approximately 180

° in close contact with the DVD

Video Camera body: Doing this could cause the DVD

Video Camera and LCD monitor to become hot.

Hook your finger

90°

(Bottom)

204

ENG.book Page 36 Tuesday, March 23, 2004 8:12 PM