LSQT1145.book 1 ページ ２００７年２月１４日 水曜日 午前１１時５５分 Operating Instructions DVD Video Camera Model No. VDR-D310 VDR-D230 VDR-D210 Video light – µ – SD card compatible µ µ – Computer software µ µ – VDR-D310 VDR-D230 VDR-D210 Before connecting, operating or adjusting this product, please read the instructions completely. Spanish Quick Use Guide is included. Guía para rápida consulta en español está incluida.
LSQT1145.book 2 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Things You Should Know Thank you for choosing Panasonic! You have purchased one of the most sophisticated and reliable products on the market today. Used properly, we’re sure it will bring you and your family years of enjoyment. Please take time to fill in the information on the right. Be sure to retain this manual as your convenient camera information source. Date of Purchase Dealer Purchased From Dealer Address Dealer Phone No. Model No. Serial No.
LSQT1145.book 3 ページ ２００６年１２月２８日 CLASS 1 LASER PRODUCT 木曜日 午前９時３４分 WARNING IEC 60825-1:2001 CAUTION This product contains a laser diode of higher class than 1. To ensure continued safety, do not remove any covers or attempt to gain access to the inside of the product. Refer all servicing to qualified personnel. ≥ AS WITH ANY SMALL OBJECT, SD CARDS CAN BE SWALLOWED BY YOUNG CHILDREN. DO NOT ALLOW CHILDREN TO HANDLE THE SD CARD. THE FOLLOWING APPLIES ONLY IN THE U.S.A.
LSQT1145.book 4 ページ ２００６年１２月２８日 木曜日 午前９時３４分 IMPORTANT SAFETY INSTRUCTIONS Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference. 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth.
LSQT1145.book 5 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Precautions USE & LOCATION WARNING ≥ TO AVOID SHOCK HAZARD ... Your camera and power supply should not be exposed to rain or moisture. Do not connect the power supply or operate your camera if it gets wet. Your camera has been designed for outdoor use, however it is not designed to sustain direct exposure to water, rain, sleet, snow, sand, dust, or a direct splashing from a pool or even a cup of coffee.
LSQT1145.book 6 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Batteries 1 Battery pack (Lithium ion battery pack) ≥ Use the specified unit to recharge the battery pack. ≥ Do not use the battery pack with equipment other than the specified unit. ≥ Do not get dirt, sand, liquids, or other foreign matter on the terminals. ≥ Do not touch the plug terminals (i and j) with metal objects. ≥ Do not disassemble, remodel, heat or throw into fire. 2 Button-type battery (Lithium battery) ≥ Insert with poles aligned.
LSQT1145.book 7 ページ ２００６年１２月２８日 木曜日 午前９時３４分 -If you see this symbolInformation on Disposal in other Countries outside the European Union This symbol is only valid in the European Union. If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal. ≥ SDHC Logo is a trademark. ≥ miniSD Logo is a trademark. ≥ Apparatus Claims of U.S. Patent Nos. 4,631,603, 4,577,216, and 4,819,098, licensed for limited viewing.
LSQT1145.book 8 ページ ２００６年１２月２８日 木曜日 Contents Before using Features ................................................ 10 Quick Guide .......................................... 12 Accessories .......................................... 15 Parts identification and handling ....... 16 Using the LCD monitor .............................19 Using the viewfinder .................................20 Using the remote control (VDR-D310) .....20 Discs and cards....................................
LSQT1145.book 9 ページ ２００６年１２月２８日 木曜日 Displaying disc information.......................83 Card management (VDR-D310/VDR-D230) ......................... 83 Formatting an SD card .............................83 With other products With a TV............................................... 85 Playback on TV ........................................85 With a DVD recorder/player.................86 Playback on DVD recorder, DVD player, computer etc.............................................
LSQT1145.book 10 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Before using Before using Features ∫ Easy recording! (l 46) No need to search for the recording start position. The new recording will not overwrite any previously recorded scene. ∫ Easy playback! (l 65) Recorded scenes are displayed as thumbnails. You can easily search for the scenes you want to watch.
LSQT1145.book 11 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Before using If you insert a DVD-RW or a DVD-R disc recorded in this unit (that has not been finalized) into another device such as DVD recorder, computer, etc., the disc may become unusable. Be sure to finalize the disc on this unit before inserting it in other devices. (l 81) ∫ Using with DVD player/recorder! (l 86) Just insert the disc into a DVD player/recorder compatible with 8 cm (3z) discs to play back the scenes recorded with this unit.
LSQT1145.book 12 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Before using Quick Guide ∫ Charging the battery 1 2 ∫ How to turn on/off the power While pressing the button A, set the OFF/ON switch to ON/OFF. Connect the AC cable to the AC adaptor and the AC outlet. Put the battery on the battery mount by aligning the mark, and then securely plug it in. A A ∫ Inserting the battery Push the battery against the battery holder and slide it until it clicks.
LSQT1145.book 13 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Before using ∫ Inserting/removing an SD card (VDR-D310/VDR-D230) 1 Slide the card slot cover to open. 2 Insert/remove the SD card into/from the card slot. 3 Securely close the card slot cover. ∫ Recording motion pictures ≥ Rotate the mode dial to select . 1 Press the recording start/stop button to start recording. 2 Press the recording start/stop button again to pause recording.
LSQT1145.book 14 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Before using 2 Press the Photoshot button [ take the picture. VDR-D230: Press the Photoshot button [ ] fully to ]. 3 Move the joystick to operate. 1/;: Playback/Pause :: Skip playback (backward) 9: Skip playback (forward) ∫: Stops the playback and shows the thumbnails. ∫ Still picture playback (JPEG still pictures) (VDR-D310/VDR-D230) ≥ Rotate the mode dial to select . ∫ Motion picture playback ≥ Rotate the mode dial to select 1 2 .
LSQT1145.book 15 ページ ２００７年２月１４日 水曜日 午前１１時５６分 Before using ∫: Stops the playback and shows the thumbnails. Accessories Check the accessories before using this unit.
LSQT1145.book 16 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Before using 6 VDR-D310: This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material – special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate. Parts identification and handling Due to limitations in LCD production technology, there may be some tiny bright or dark spots on the viewfinder screen. However, this is not a malfunction and does not affect the recorded picture.
LSQT1145.
LSQT1145.book 18 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Before using Using grip belt 1 Pass the end of the lens cap cord through the belt. 2 Pass the lens cap through the loop. 3 To attach or remove the lens cap, hold both sides of the lens cap with the tips of your finger and thumb. Adjust the belt length so it fits your hand. U.S.A. only When this unit is purchased, a sensor tag is attached to the grip belt. Remove the tag before use. 3 1 2 1 Flip the belt. 2 Take off the tag. 3 Replace the belt.
LSQT1145.book 19 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Before using Lens hood Rotate the lens hood counterclockwise A to remove it. ∫ VDR-D310 In order to attach it, place into slot B, and then rotate it clockwise C. ∫ VDR-D230/VDR-D210 In order to attach it, rotate it clockwise B. A A B B Tripod receptacle This is a hole for attaching the unit to the optional tripod. (Please carefully read the operating instructions for how to attach the unit to the tripod.
LSQT1145.book 20 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Before using 1 Place your finger on the LCD monitor open part A and pull the LCD monitor out in the direction of the arrow. The viewfinder will be activated. (If the LCD monitor is opened, the viewfinder will be deactivated.) ≥ The brightness of the viewfinder (l 43) and the field of view (l 43) can be adjusted. Using the remote control (VDR-D310) A ≥ It can open up to 90o. 1 2 2 Adjust the angle of the LCD monitor as desired.
LSQT1145.book 21 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Before using 1 While pressing the stopper A, pull out the battery holder. ∫ Remote control usable range The distance between the remote control and the unit’s remote control sensor A: Within approx. 5 m (16 feet) Angle: Approx. 10o up and 15o down, left, and right A 2 Set the button-type battery with its (r) mark facing upward and then put the battery holder back in place. A ≥ The remote control is intended for indoor operation.
LSQT1145.book 22 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Before using Discs and cards Discs that can be used on this unit Disc type DVD-RAM 8 cm (3z) Single sided/ double sided DVD-RW 8 cm (3z) Single sided/double sided (DVD-RAM Ver. 2.1) [DVD-RW Ver. 1.
LSQT1145.book 23 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Before using Disc type DVD-R 8 cm (3z) Single sided/double sided DVD-R DL 8 cm (3z) Dual layer on single side (DVD-R for General Ver. 2.0) (DVD-R for DL Ver. 3.
LSQT1145.book 24 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Before using ≥ For the purposes of these operating instructions, DVD-R and DVD-R DL are referred to as the “DVD-R”. ≥ Still pictures cannot be recorded on a disc with this unit. (VDR-D310/VDR-D230) ≥ You cannot record or play continuously from one side of the disc to the other when using a double sided disc. You will need to eject the disc and turn it over. ≥ Discs inserted in a holder, cartridge, or caddy case cannot be used.
LSQT1145.book 25 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Before using When using brand-new DVD-RW When using DVD-RW, select whether to record in DVD Video Recording format (VR format) or DVDVideo format (Video format) and then format the disc. (l 24, About format types) 1 When a brand-new DVD-RW is inserted in this unit, the screen on the right appears. Select [YES], then press the joystick. 2 Select format type, then press the joystick.
LSQT1145.book 26 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Before using Cards that you can use with this unit (VDR-D310/VDR-D230) Card type Capacity Indication in these instructions SD Memory Card SDHC Memory Card 8 MB, 16 MB, 32 MB, 64 MB, 128 MB, 256 MB, 512 MB, 1 GB, 2 GB 4 GB (SD) This unit is compatible with both SD Memory cards and SDHC Memory cards. You can only use SDHC Memory cards on devices that are compatible with them.
LSQT1145.book 27 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Before using Disc and card handling ∫ How to hold a disc or card Do not touch the recording/playback surface or the terminal surface. ∫ When inserting/removing a disc Do not allow the recording/playback side of the disc to get dirty and avoid fingerprints. ≥ If there is a scratch or dirt (e.g.
LSQT1145.book 28 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Setup Setup Power supply Inserting the battery Push the battery against the battery holder and slide it until it clicks. Charging the battery When this unit is purchased, the battery is not charged. Charge the battery before using this unit. ≥ If the DC cable is connected to the AC adaptor, then the battery will not charge. Remove the DC cable from the AC adaptor. A Removing the battery 1 Connect the AC cable to the AC adaptor and the AC outlet.
LSQT1145.book 29 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Setup Charging time and recordable time The times shown in the tables below are for when the temperature is 25 oC (77 oF) and the humidity is 60%. If the temperature is higher or lower than 25 oC (77 oF), the charging time will become longer. ∫ Charging time ≥ The charging time shown in the table are approximations. ≥ “2 h 25 min” indicates 2 hours 25 minutes.
LSQT1145.book 30 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Setup ∫ Recordable time (When using a DVD-RAM disc) ≥ The times indicate the recordable time when the viewfinder is used. The times in parentheses indicate the recordable time when the LCD monitor is used. ≥ The actual recordable time refers to the recordable time on a disc when repeatedly starting/stopping recording, turning the unit on/off, moving the zoom lever, etc. ≥ “1 h 25 min” indicates 1 hour 25 minutes.
LSQT1145.book 31 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Setup VDR-D230/VDR-D210: Battery model number Supplied battery/ CGR-DU06 (optional) CGA-DU12 (optional) CGA-DU21 (optional) Voltage/ capacity 7.2 V/ 640 mAh 7.2 V/ 1150 mAh 7.
LSQT1145.book 32 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Setup Connecting to the AC outlet How to turn on the power While pressing the button A, set the OFF/ON switch to ON. A B 1 Connect the AC cable to the AC adaptor and the AC outlet. 2 Connect the DC cable to the AC adaptor. 3 Connect the DC cable to this unit. ≥ Do not use the AC cable with any other equipment as it is designed only for this unit. Do not use the AC cable from other equipment with this unit.
LSQT1145.book 33 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Setup When the power is turned on for the first time after changing the disc or battery, the unit carries out a recognition procedure to check that there are no problems with the disc. This takes approximately 25 seconds with DVD-RAM. If you want to start using the unit as soon as you turn on the power, do the following. 1) Turn on the power. 2) After “READING DISC...” disappears from the screen, turn off the power.
LSQT1145.book 34 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Setup A few moments after the ACCESS/PC lamp blinks, the cover of the disc compartment will open slightly. 3 ∫ Removing disc While pressing down on the spindle, grasp the edge of the disc and gently lift it out. Open the cover of the disc compartment by hand and insert/ remove the disc. ∫ Inserting disc Fit the disc onto the spindle in the center and then push the disc down until it clicks into place.
LSQT1145.book 35 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Setup “SIDE B” recording/playback side is the side with the “SIDE A” mark. A D DV -RAM / SIDE A B A “SIDE A” mark B The opposite side is the “SIDE A” recording/ playback side. ≥ Do not use excessive force when opening the cover. ≥ Do not touch the pickup lens or the recording/ playback side of the disc. This may impair recording and playback. ≥ Insert the disc securely to prevent damage. ≥ When you open the cover, the ACCESS/PC lamp flashes red.
LSQT1145.book 36 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Setup 3 Insert/remove the SD card into/ from the card slot. Selecting a mode The mode dial is used to switch between recording and playback modes. Rotate the mode dial slowly but surely. Rotate the mode dial, and set the desired mode pictograph to the position shown in the illustration. A ≥ When inserting an SD card, face the label side A upwards and press it straight in as far as it goes.
LSQT1145.book 37 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Setup Move the joystick up, down, left, or right to select an item or scene, and then press the joystick to set it. 1 1 3 4 Move the joystick up, down, left or right to select the scene to be played back and press the joystick. 5 2 1 Select by moving up. 2 Select by moving down. 3 Select by moving left. 4 Select by moving right. 5 Press the joystick to select the item.
LSQT1145.
LSQT1145.
LSQT1145.book 40 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Setup ∫ Help mode The help mode explains the operation icons that are displayed when the AUTO/MANUAL/FOCUS switch is set to AUTO in video/picture recording mode. ¬ Rotate the mode dial to select . 1 ≥ When the help mode is used, functions cannot be set. ≥ When the help mode is used, motion pictures and still pictures cannot be recorded. or Press the joystick to display the icon during the recording pause.
LSQT1145.book 41 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Setup 2 Move the joystick up or down in order to select the desired top menu. 7 Press the joystick to enter the selection. To get back to the previous screen Move the joystick left. 3 Move the joystick right or press the joystick. To exit the menu screen Press the MENU button. 4 Move the joystick up or down in order to select the submenu item. MENU ≥ The menu screen does not appear during recording or playing.
LSQT1145.book 42 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Setup move the joystick up or down to set the desired value. ≥ Use the direction buttons (3,4,2,1) and ENTER button in place of the joystick on the main unit. 3 Press the MENU button to exit the menu screen. MENU ≥ The year will change as follows: 2000, 2001, ..., 2099, 2000, ... ≥ The 12-hour system is used to display the time.
LSQT1145.book 43 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Setup ≥ The date and time function are driven by a built-in lithium battery. ≥ Make sure to check the time before recording. ≥ If the time display becomes [- -], the built-in lithium battery has run down. Use the following steps to charge the battery. When you turn on the power for the first time after charging, a message asking you to set the date and time will appear. Select [YES] and set the date and time.
LSQT1145.book 44 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Recording Recording Before recording Basic camera positioning 1 4 3 2 5 1 Hold the camera with both hands. 2 Put your hand through the grip belt. 3 Do not cover the microphones or sensors with your hands. 4 Keep your arms near your body. 5 Slightly open your legs. ≥ When you are outdoors, record pictures with the sunlight behind you. If the subject is backlit, it will become dark in the recording.
LSQT1145.book 45 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Recording ∫ About auto mode Set the AUTO/MANUAL/FOCUS switch to AUTO, and color balance (white balance) and focusing will be adjusted automatically. jAuto white balance (l 136) jAuto focusing (l 137) Depending on the brightness of the subject etc., the aperture and shutter speed are automatically adjusted for an optimum brightness. (When set to the video recording mode: The shutter speed is adjusted to a maximum of 1/250.
LSQT1145.book 46 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Recording Recording motion pictures (RAM) (-RW‹VR›) (-RW‹V›) (-R) Record motion pictures onto a disc. ≥ When the unit is purchased, the aspect ratio is set to [16:9] for recording images compatible with a wide-screen TV. To watch images on a regular TV (4:3), change the aspect ratio setting (l 59) before recording the images or when watching them on the connected TV (l 85). ≥ Remove the lens cap before turning the unit on.
LSQT1145.book 47 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Recording ≥ When about 5 minutes have passed without any operation in recording pause, the unit automatically turns off to prevent the battery from running down. When you want to use the unit, turn it on again. This setting can also be set to [OFF]. (l 117, [POWER SAVE]) Screen indications in the video recording mode A Recording mode B Remaining time left for recording (When the remaining time is less than 1 minute, [R 0min] flashes red.
LSQT1145.book 48 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Recording ∫ Approximate recordable time for 1 disc (single sided) Recording mode Disc type XP (High quality) SP (Normal) LP (Long play) DVD-RAM Approx. 18 min Approx. 37 min Approx. 75 min DVD-R DL Approx. 35 min Approx. 69 min Approx. 138 min Image quality prioritized Recording time prioritized ≥ This unit records in VBR. VBR is an abbreviation for Variable Bit Rate.
LSQT1145.book 49 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Recording Recording still pictures (JPEG still pictures) (VDR-D310/VDR-D230) (SD) Record the still picture on an SD card. ≥ When this unit is purchased, [PICTURE SIZE] is set to [ 2 ] (VDR-D310)/[ 0.2 ] (VDR-D230) for recording pictures compatible with a wide-screen TV (16:9). To record pictures with a 4:3 aspect ratio, change the [PICTURE SIZE] setting before recording (l 52). ≥ Remove the lens cap before turning the unit on.
LSQT1145.book 50 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Recording A Shutter chance mark A ± (The white lamp flashes.): Focusing ¥ (The green lamp lights up.): When in focus B No mark: When focusing is unsuccessful. ≥ The shutter chance mark is indicated as follows when the Photoshot button [ ] is not pressed halfway. Please use it as a guide for recording. ¥ (The green lamp lights up.): When in focus and a good picture can be recorded. ± (The white lamp lights up.
LSQT1145.book 51 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Recording ∫ To record still pictures clearly ≥ When zooming in on the subject with a magnification of 4k or higher, it is difficult to reduce the slight shaking from holding this unit by hand. We recommend decreasing the zoom magnification and approaching the subject when recording. ≥ When recording still pictures, hold the unit firmly with your hands and keep your arms stationary at your side so as not to shake the unit.
LSQT1145.book 52 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Recording Number of pixels and picture quality for still picture recording ∫ [PICTURE SIZE] Changing the recording size. Press the MENU button, then select [BASIC] # [PICTURE SIZE] # desired item and press the joystick. MENU VDR-D310: Icon Aspect Number of pixels 3.1M 4:3 2048k1512 1M 4:3 1280k960 0.3M 4:3 640k480 16:9 1920k1080 Icon Aspect Number of pixels 0.3M 4:3 640k480 16:9 640k360 2 VDR-D230: 0.
LSQT1145.book 53 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Recording Various recording functions Zoom in/out function (RAM) (-RW‹VR›) (-RW‹V›) (-R) (SD) VDR-D310: You can zoom in up to 10k optically. VDR-D230/VDR-D210: You can zoom in up to 32k optically. ¬ Rotate the mode dial to select . or Move the zoom lever. VDR-D210) away from the lens. (Macro function) ≥ The zoom speed varies depending on the range over which the zoom lever is moved. (The zoom speed does not vary when operating with the remote control.
LSQT1145.book 54 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Recording ≥ This function cannot be used in picture recording mode. To use the zoom microphone function (RAM) (-RW‹VR›) (-RW‹V›) (-R) The zoom microphone is linked to the zooming operation so that far-away sounds with a teleshot and close-up sounds with a wide-angle shot are recorded more clearly. ¬ Rotate the mode dial to select . Press the MENU button, then select [ADVANCED] # [ZOOM MIC] # [ON] and press the joystick.
LSQT1145.book 55 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Recording To eliminate washed out images, use this mode. 3 Video light off 1 1 Press the joystick. Then move the joystick down to display the icon shown in the illustration. r 2 1/2 NEXT 2 3 ≥ The subject should be within 1.5 m (5 feet) of the unit. ≥ Using the video light reduces battery time. ≥ Set the video light to off when not in use. ≥ Do not look directly into the light.
LSQT1145.book 56 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Recording 2 Move the joystick left to select [ ]. 1/2 NEXT 3 Press the recording start/stop button. Start recording. (Fade in) Press the MENU button, then select [ADVANCED] # [FADE COLOR] # [WHITE] or [BLACK] and press the joystick. ≥ If you turn off the power, the fade function is canceled. ≥ While the fade in/fade out function is selected, it takes several seconds to display the image when you start recording.
LSQT1145.book 57 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Recording ≥ If the background or anything else in the scene has colors similar to the skin color, they will also be smoothed. ≥ If the brightness is insufficient, the effect may not be clear. ≥ You may not be able to see the face clearly when recording a distant person. In this case, cancel soft skin mode or zoom in on the face. Tele macro function (VDR-D310) MagicPix function This allows recording in dark locations.
LSQT1145.book 58 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Recording ≥ If it is difficult to focus, adjust the focus manually. (l 61) To cancel the MagicPix function Select [ ] again. ≥ The MagicPix function makes the signal charging time of CCD up to approximately 30k longer than usual, so that dark scenes can be recorded brightly. For this reason, bright dots that are usually invisible may be seen, but this is not a malfunction.
LSQT1145.book 59 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Recording To cancel the Recording guideline function Press the MENU button, then select [BASIC] # [GUIDE LINES] # [OFF] and press the joystick. ≥ The guidelines do not appear on the images actually recorded. ≥ The guidelines are not displayed while rotating the LCD monitor frontward to record yourself. Wide mode This is for selecting the screen’s aspect ratio when recording motion pictures.
LSQT1145.book 60 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Recording ¬ Rotate the mode dial to select . 1 Set the AUTO/MANUAL/FOCUS switch to MANUAL. 2 Press the MENU button, then select [BASIC] # [SCENE MODE] # desired item and press the joystick. Press the MENU button, then select [ADVANCED] # [WIND CUT] # [ON] and press the joystick. MENU To cancel the wind noise reduction function Press the MENU button, then select [ADVANCED] # [WIND CUT] # [OFF] and press the joystick.
LSQT1145.book 61 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Recording ≥ Avoid recording under fluorescent light, mercury light or sodium light because the color and brightness of the playback image may change. ≥ If you record a subject illuminated with strong light or a highly reflective subject, vertical lines of light may appear. ≥ If the brightness is insufficient, the sports mode does not function. The [5] display flashes. ≥ If this mode is used indoors, the screen may flicker.
LSQT1145.book 62 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Recording 1 Set the AUTO/MANUAL/FOCUS switch to MANUAL. To set the white balance manually 1 MNL Select [ ], and fill the screen with a white subject. MNL 3/3 NEXT The icon shown in the illustration is displayed automatically. 2 Move the joystick up to select [ ]. BACK BACK 2 Move the joystick up to select [ ]. MNL MNL 3/3 NEXT BACK 3 Move the joystick left or right to select the white balance mode.
LSQT1145.book 63 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Recording will temporarily be black. (The black balance cannot be adjusted manually.) 1 2 2 3 Move the joystick left or right to select [ ] (aperture) or [ ] (shutter speed). MNL 1 Black balance adjustment in progress. (Flashes.) 2 White balance adjustment in progress. (Flashes.) 3 Adjustment completed. (Lights up.) 3/3 NEXT 3 ≥ When the unit is turned on with the lens cap attached, the automatic white balance adjustment may not function properly.
LSQT1145.book 64 ページ ２００６年１２月２８日 木曜日 Recording ≥ You may see vertical lines of light in the playback image of a brightly shining subject or highly reflective subject, but this is not a malfunction. ≥ During normal playback, image movement may not look smooth. ≥ When recording in an extremely bright place, the screen may change color or flicker. If so adjust the shutter speed manually to [1/60] or [1/100]. ∫ Manual iris/gain adjustment ≥ If the gain value is increased, the noise on the screen increases.
LSQT1145.book 65 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Playback Playback Motion picture playback (RAM) (-RW‹VR›) (-RW‹V›) (-R) Play back the motion pictures and the MPEG still pictures (VDR-D210) recorded on the disc. 1 Rotate the mode dial to select . The motion pictures and the MPEG still pictures (VDR-D210) recorded on the disc are displayed as thumbnails. 2 Select the scene to be played back. A Scene number B Scroll bar display The selected scene will be encircled by a yellow frame.
LSQT1145.book 66 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Playback ≥ The time displayed may be different from the recording time and it may take time to display the thumbnail display when playing back motion pictures recorded on another product. ≥ The recording time is not displayed on the screen during playback of scenes recorded on other products. Fast forward/rewind playback Move and hold the joystick right during playback until fast-forward starts. (Move and hold the joystick left to rewind.
LSQT1145.book 67 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Playback 1 Move the joystick up during playback to pause the playback. 2 Move the joystick right. (The frames will be advanced one at a time in the reverse direction when you move the joystick left.) ≥ Normal playback is restored when you move the joystick up. ∫ Operating with the remote control (VDR-D310) 1 Press the ; button. SEARCH PLAY SEARCH STILL ADV PAUSE STILL ADV SKIP STOP SKIP Press the E or D button.
LSQT1145.book 68 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Playback 2 Select the date for playback, then press the joystick. The scenes recorded on the same day are displayed as thumbnails. 3 Select the scene to be played back. ≥ Even if scenes are recorded on the same day, they are grouped separately in the following cases.
LSQT1145.book 69 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Playback Still picture playback (JPEG still pictures) (VDR-D310/VDR-D230) (SD) Play back the still pictures recorded on the card. 1 Rotate the mode dial to select . The still pictures recorded on the SD card are displayed as thumbnails. 2 Select the file to be played back. A File number B Scroll bar display The selected file will be encircled by a yellow frame.
LSQT1145.book 70 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Playback ≥ Do not operate the mode dial during the slide show. ≥ While this unit accesses the SD card (the access lamp is lit), do not remove the SD card. ≥ It takes time to display the file depending on the number of pixels of the file. ≥ When a file is displayed as [ ] on the thumbnail display, playback is not possible. ≥ If you attempt to play back file recorded in a different format or file data is defective, an error message may appear.
LSQT1145.book 71 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Editing 2 Editing Editing scenes Deleting scenes This is for deleting scenes recorded on discs. (RAM) (-RW‹VR›) The deleted scenes cannot be restored. ≥ Scenes on DVD-RW (Video format) and DVDR cannot be deleted. Select [SELECT] or [ALL] and press the joystick. ≥ When [ALL] is selected, the following scenes will be deleted. Proceed to step 5.
LSQT1145.book 72 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Editing move the joystick down to set the dividing point. ≥ Do not turn off this unit while deleting. ≥ When you delete scenes, use a battery with sufficient battery power or use the AC adaptor. ≥ It may not be possible to delete scenes that have been divided. Combine the divided scenes, and then delete them. Dividing a scene This is for dividing a scene into two.
LSQT1145.book 73 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Editing 2 Select the scene to be combined, then press the joystick. ≥ If you create or delete playlists, the original scenes will not be modified. Editing scenes on a playlist will not affect the original scenes. A B ≥ The selected scene and the next scene are combined. ≥ If you wish to combine scenes that are not next to each other or scenes with different recording dates, first create a playlist and then combine the scenes on the playlist.
LSQT1145.book 74 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Editing 2 [PLAYLIST] # [VIEW LIST] and press the joystick. Select the scene to be added to the playlist, then press the joystick. MENU The selected scene is encircled by a red frame. ≥ When the joystick is pressed again, the selected scene will be canceled. ≥ Up to 50 scenes can be set in succession. ≥ The scenes are registered in the playlist in the order that they were selected.
LSQT1145.book 75 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Editing 3 (Only when [SELECT] is selected in step 2) Select the scene to be deleted, then press the joystick. Deleting scenes ≥ Deleting scenes on a playlist will not affect the original scenes. ∫ Deleting scenes one at a time ¬ Select playlist playback mode. (l 74, steps 1 and 2) 1 Press the playback. button during The selected scene is encircled by a red frame. ≥ When the joystick is pressed again, the selected scene will be canceled.
LSQT1145.book 76 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Editing 1 Press the MENU button, then select [EDIT] # [ADD] # [YES] and press the joystick. 1 Press the MENU button, then select [EDIT] # [MOVE] # [YES] and press the joystick. MENU 2 Select the scene to be added, then press the joystick. The selected scene is encircled by a red frame. ≥ When the joystick is pressed again, the selected scene will be canceled. ≥ Up to 50 scenes can be set in succession.
LSQT1145.book 77 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Editing 1 Press the MENU button, then select [EDIT] # [DIVIDE] # [YES] and press the joystick. MENU Combining scenes Two consecutive scenes can be combined into one. ≥ Combining scenes on a playlist will not affect the original scenes. ¬ Select playlist playback mode. (l 74, steps 1 and 2) 1 2 Select the scene to be divided, then press the joystick. Press the MENU button, then select [EDIT] # [COMBINE] # [YES] and press the joystick.
LSQT1145.book 78 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Editing ≥ When [ALL] is selected, all files on the SD card except the locked files will be erased. Proceed to step 5. Editing still pictures (VDR-D310/VDR-D230) 3 Deleting still pictures (Only when [SELECT] is selected in step 2) Select the file to be deleted, then press the joystick. This is for deleting still picture files recorded on SD cards. (SD) The deleted files cannot be restored.
LSQT1145.book 79 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Editing ≥ If files conforming to DCF standard are deleted, all the data related to the files will be deleted. Locking still pictures This is for preventing still picture files from being deleted by mistake. (SD) Still picture files recorded on an SD card can be locked so that they are not deleted by mistake. (However even if you lock some files on an SD card, formatting the card will delete all the files.
LSQT1145.book 80 ページ ２００６年１２月２８日 木曜日 Editing To cancel all DPOF settings Press the MENU button, then select [PICT. SETUP] # [DPOF SET] # [CANCEL ALL] and press the joystick. ≥ When the confirmation message appears, select [YES], then press the joystick. ∫ What is DPOF? DPOF stands for Digital Print Order Format. This enables picture printing information to be written onto an SD card so that it can be used on a system supporting DPOF. ≥ The DPOF setting can be established for up to 999 files.
LSQT1145.book 81 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Disc and card management [FINALIZE] # [YES] and press the joystick. Disc and card management Disc management Finalizing a disc It allows the discs to be played on other devices. MENU (-RW‹VR›) (-RW‹V›) (-R) If you insert a DVD-RW or a DVD-R disc recorded in this unit (that has not been finalized) into another device such as DVD recorder, computer, etc., the disc may become unusable.
LSQT1145.book 82 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Disc and card management [DISC PROTECT] and press the joystick. Un-finalizing a DVD-RW This is for un-finalizing a DVD-RW (Video format) so that it can be used for recording. MENU (-RW‹V›) ¬ Rotate the mode dial to select 1 . Press the MENU button, then select [DISC SETUP] # [UN-FINALIZE] # [YES] and press the joystick. 2 When the confirmation message appears, select [YES], then press the joystick.
LSQT1145.book 83 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Disc and card management [FORMAT DISC] # [YES] and press the joystick. Displaying disc information (RAM) (-RW‹VR›) (-RW‹V›) (-R) MENU ≥ When formatting a DVD-RAM, skip to step 3. 2 (When formatting a DVD-RW only) Select format type (l 24), then press the joystick. Information such as the number of recorded scenes, the remaining space and whether or not the disc is finalized or protected is displayed. ¬ Rotate the mode dial to select .
LSQT1145.book 84 ページ ２００６年１２月２８日 木曜日 Disc and card management 1 Press the MENU button, then select [SETUP] # [FORMAT CARD] # [YES] and press the joystick. MENU 2 When the confirmation message appears, select [YES], then press the joystick. ≥ When formatting is complete, press the MENU button to exit the message screen. ≥ Use this unit to format SD cards.
LSQT1145.book 85 ページ ２００６年１２月２８日 木曜日 午前９時３４分 With other products The image and audio are output on the TV. With other products With a TV Playback on TV (RAM) (-RW‹VR›) (-RW‹V›) (-R) (SD) The motion pictures and still pictures recorded by this unit can be played back on a TV. ≥ Use the AC adaptor to free you from worrying about the battery running down. 1 Connect this unit and a TV.
LSQT1145.book 86 ページ ２００６年１２月２８日 木曜日 午前９時３４分 With other products ≥ This function’s default setting is [16:9]. ∫ To display the on-screen information on the TV (VDR-D310) Playing back a DVD-RAM or a DVD-RW (VR format) (RAM) (-RW‹VR›) 1 The information displayed on the screen (operation icon and time code, etc.) can be displayed on the TV. Press the EXT DISPLAY button on the remote control.
LSQT1145.book 87 ページ ２００６年１２月２８日 木曜日 午前９時３４分 With other products Refer to the operating instructions of the playback device. ≥ The recording time is not displayed. Copying (dubbing) recordings onto a DVD recorder’s hard disk (RAM) (-RW‹VR›) (-RW‹V›) (-R) If you have a DVD recorder with hard disk, images recorded by this unit can be stored on the hard disk. ≥ Do not insert a DVD-RW or a DVD-R disc recorded in this unit (that has not been finalized) into the DVD recorder as the disc may become unusable.
LSQT1145.book 88 ページ ２００６年１２月２８日 木曜日 午前９時３４分 With other products 1 Connect this unit and a video device. With a printer (PictBridge) (VDR-D310/VDR-D230) (SD) A * S VIDEO IN VIDEO IN AUDIO IN A AV/S cable (VDR-D310/VDR-D230) (supplied) AV cable (VDR-D210) (supplied) ≥ Insert the plugs as far as they will go. To print pictures by directly connecting this unit to the printer, use a printer compatible with PictBridge. (Read the operating instructions for the printer.
LSQT1145.book 89 ページ ２００６年１２月２８日 木曜日 午前９時３４分 With other products 3 Select a file to be printed, then press the joystick. [A4]: A4 size ≥ You cannot set paper sizes not supported on the printer. 8 Select the layout setting on [PAGE LAYOUT]. The number of pictures set is displayed. 4 Move the joystick up or down to select the desired number of prints, then press the joystick. [STANDARD]: Layout specific to the printer ≥ You can set up to 9 prints.
LSQT1145.book 90 ページ ２００６年１２月２８日 With other products ≥ You may not be able to print still pictures recorded with other products. ≥ When the unit is connected directly to the printer, the DPOF settings cannot be used. ≥ Connect the printer directly to this unit. Do not use a USB hub.
LSQT1145.book 91 ページ ２００７年３月６日 火曜日 午前１０時４９分 With a computer (VDR-D310/VDR-D230) With a computer (VDR-D310/VDR-D230) Before using with a computer (Windows) What you can do with a computer ∫ When using a DVD-RAM or DVD-RW (VR format) recorded on this unit ≥ Before using DVD-RW (VR format) on a computer, be sure to finalize it on this unit.
LSQT1145.book 92 ページ ２００６年１２月２８日 木曜日 午前９時３４分 With a computer (VDR-D310/VDR-D230) Contents on provided CD-ROM The following software applications are contained on the provided CD-ROM. ∫ DVD-RAM Driver This is necessary to configure the unit as a drive on a computer. DVDForm: This is used to format DVD-RAM on a computer. ∫ DVD-MovieAlbum DVD-MovieAlbumSE: This software is for playing back and editing* VR format motion pictures.
LSQT1145.book 93 ページ ２００６年１２月２８日 木曜日 午前９時３４分 With a computer (VDR-D310/VDR-D230) ∫ DVDfunSTUDIO This software is for creating a DVD-Video disc. Use this software when burning a DVD-Video disc from motion pictures edited using DVD-MovieAlbumSE. For details, refer to page 105. B A 1 C Export the images from a DVD-RAM or DVD-RW (VR format) with DVD-MovieAlbumSE. A File Export 2 Create a DVD menu with DVDfunSTUDIO, then write the data to a DVD-RW or DVD-R.
LSQT1145.book 94 ページ ２００６年１２月２８日 木曜日 午前９時３４分 With a computer (VDR-D310/VDR-D230) Operating environment ≥ A CD-ROM drive is necessary to install the supplied software applications. ≥ When 2 or more USB devices are connected to a computer, or when devices are connected through USB hubs or by using extension cables, proper operation is not guaranteed. ≥ Use the supplied USB cable when connecting to the computer. (Operation is not guaranteed with any other USB cables.
LSQT1145.book 95 ページ ２００６年１２月２８日 木曜日 午前９時３４分 With a computer (VDR-D310/VDR-D230) ∫ DVDfunSTUDIO 2.5 Personal computer IBM PC/AT compatible personal computer OS Microsoft Windows 2000 Professional Service Pack 4 Microsoft Windows XP Home Edition Service Pack 2 Microsoft Windows XP Professional Service Pack 2 CPU Intel Pentium III 800 MHz or higher (Intel Pentium 4 1.
LSQT1145.book 96 ページ ２００６年１２月２８日 木曜日 午前９時３４分 With a computer (VDR-D310/VDR-D230) ∫ Using Built-in SD Drive Personal computer IBM PC/AT compatible personal computer OS Microsoft Windows 2000 Professional Microsoft Windows XP Home Edition Microsoft Windows XP Professional CPU Intel Pentium II 300 MHz or higher RAM 32 MB or more (64 MB or more recommended) Interface USB 1.1 or later — A type ≥ The USB equipment operates with the driver installed as standard in the OS.
LSQT1145.book 97 ページ ２００６年１２月２８日 木曜日 午前９時３４分 With a computer (VDR-D310/VDR-D230) End User License Agreement Before opening the CD-ROM package, please read the following. You (“Licensee”) are granted a license for the Software defined in this End User Software Agreement (“Agreement”) on condition that you agree to the terms and conditions of this Agreement. If Licensee does not agree to the terms and conditions of this Agreement, promptly return the Software to Matsushita Electric Industrial Co., Ltd.
LSQT1145.book 98 ページ ２００６年１２月２８日 木曜日 午前９時３４分 With a computer (VDR-D310/VDR-D230) ≥ Before starting the installation, close any other software applications which are running. ≥ Do not perform any other operations on your computer while the software is being installed. ≥ If another DVD-RAM Driver is already installed in your computer, check this DVD-RAM Driver. If packet writing software which supports DVDRAM discs is installed, it is necessary to uninstall it and then install the provided DVD-RAM Driver.
LSQT1145.book 99 ページ ２００６年１２月２８日 木曜日 午前９時３４分 With a computer (VDR-D310/VDR-D230) Check the contents, then click [k] at the top right of window. Installing DVD-MovieAlbumSE 1 8 Click [Finish]. The introduction movie starts. Click [To continue the installation] at the end of the introduction movie and then the [Setup Menu] screen will appear. ≥ If the introduction movie screen does not appear, double-click the CD-ROM drive icon in [My Computer].
LSQT1145.book 100 ページ ２００６年１２月２８日 木曜日 午前９時３４分 With a computer (VDR-D310/VDR-D230) 4 Select [NTSC (North America)] for the TV system, click [Next]. Continue to follow the on-screen messages to install it. 5 ≥ Depending on the operating environment, you may be required to install DirectX 9.0c. If so, click [Yes], and install it. If you install the software in a computer that is not compatible with DirectX 9.0c, the computer may not work properly.
LSQT1145.book 101 ページ ２００６年１２月２８日 木曜日 午前９時３４分 With a computer (VDR-D310/VDR-D230) [Panasonic] # [DVD camcorders] # [DVD camcorders]. ≥ You will need Adobe Acrobat Reader 5.0 or later to read the PDF operating instructions. (l 93) ∫ DVD-RAM Driver Select [start] # [All Programs (Programs)] # [DVD-RAM] # [DVD-RAM Driver] # [Using DVD-RAM disc]. A screen showing a brief explanation of the application is displayed. 2 Click [Close].
LSQT1145.book 102 ページ ２００６年１２月２８日 木曜日 午前９時３４分 With a computer (VDR-D310/VDR-D230) 2 Select the software application to be deleted, then click [Change/ Remove] ([Change or Remove] or [Add/Remove]). 1 Insert a disc or card with recorded images in the unit, then turn on the unit. 2 Connect this unit and a computer. ≥ Proceed with the uninstallation by following the on-screen instructions. ≥ After uninstalling the software, be sure to reboot the computer.
LSQT1145.book 103 ページ ２００６年１２月２８日 木曜日 午前９時３４分 With a computer (VDR-D310/VDR-D230) ≥ When a computer is accessing a disc or card in this unit, the ACCESS/PC lamp or card access lamp lights. (When a card is being accessed, appears on the LCD monitor.) Do not disconnect the USB cable or AC adaptor while the disc or card is being accessed as it may damage the data. ≥ The disc and card cannot be accessed simultaneously.
LSQT1145.book 104 ページ ２００６年１２月２８日 木曜日 午前９時３４分 With a computer (VDR-D310/VDR-D230) ≥ When data not supported by this unit has been recorded on a computer, it will not be recognized by this unit. 1 Select [start] # ([Settings] #) [Control Panel] # ([Performance and Maintenance] #) [System]. 2 Click the [Hardware] tab, then click [Device Manager]. 3 Verify the following items are displayed. To disconnect USB cable safely 1 Double click the tray. icon in task Hardware disconnect dialog appears.
LSQT1145.book 105 ページ ２００６年１２月２８日 木曜日 午前９時３４分 With a computer (VDR-D310/VDR-D230) When using a card: [USB Mass Storage Device] is displayed at [Universal Serial Bus controllers]. ¬ Connect this unit to the AC adaptor. 1 Insert a DVD-RAM or DVD-RW (VR format) with recorded images in the unit, then turn on the unit. 2 Connect this unit and a computer. ∫ If the driver has not been recognized properly [!] or [Unknown device] appears at [Universal Serial Bus controllers] or [Other devices], etc.
LSQT1145.book 106 ページ ２００６年１２月２８日 木曜日 午前９時３４分 With a computer (VDR-D310/VDR-D230) small box for [Eject the disc being used.], and then click [Yes]. ≥ If the screen showing a brief explanation of the application is displayed, close it. DVD-MovieAlbumSE starts and the images recorded on the disc are displayed. When starting DVD-MovieAlbumSE, the [Mount Information] dialog box may appear or the recorded images may not be shown. If this occurs, try the following procedure.
LSQT1145.book 107 ページ ２００６年１２月２８日 木曜日 午前９時３４分 With a computer (VDR-D310/VDR-D230) 12 Click [Burning]. Writing to the disc starts. When writing is complete, the disc is ejected automatically. ≥ The DISC EJECT lever on this unit does not work when the unit is connected to a computer. Use the software’s eject button to eject the disc. (When not using the software, use Windows Explorer to right-click the drive icon for this unit and select [Eject].
LSQT1145.book 108 ページ ２００６年１２月２８日 木曜日 午前９時３４分 With a computer (VDR-D310/VDR-D230) Before using with a computer (Macintosh) What you can do with a computer ∫ When using a disc recorded on this unit Before using DVD-RW (VR format), DVD-RW (Video format) and DVD-R on the computer, finalize them on this unit.
LSQT1145.book 109 ページ ２００６年１２月２８日 木曜日 午前９時３４分 With a computer (VDR-D310/VDR-D230) Contents on provided CD-ROM The following software application is contained on the provided CD-ROM. ∫ ImageMixer 3 This software is for playing back motion pictures recorded on a disc, importing motion pictures to a computer, creating a DVD-Video disc etc. Use this software when burning a DVD-Video disc from motion pictures recorded on this unit. For details, refer to page 112.
LSQT1145.book 110 ページ ２００６年１２月２８日 木曜日 午前９時３４分 With a computer (VDR-D310/VDR-D230) Operating environment ≥ A CD-ROM drive is necessary to install the supplied software. ≥ Even if the system requirements mentioned in these operating instructions are fulfilled, some computers cannot be used. ≥ Use the supplied USB cable when connecting to the computer. (Operation is not guaranteed with any other USB cables.) ∫ ImageMixer 3 OS Mac OS X v10.3.9, v10.4.2 to v10.4.
LSQT1145.book 111 ページ ２００６年１２月２８日 木曜日 午前９時３４分 With a computer (VDR-D310/VDR-D230) Installation (Macintosh) 5 Click [Continue]. ≥ Before starting the installation, close any other software applications which are running. ≥ Do not perform any other operations on your computer while the software is being installed. 1 Insert the CD-ROM into the computer. [PANASONIC] CD-ROM icon appears. Continue to follow the on-screen messages to install it.
LSQT1145.book 112 ページ ２００６年１２月２８日 木曜日 午前９時３４分 With a computer (VDR-D310/VDR-D230) Using discs on a computer (Macintosh) ≥ Do not use any other USB cables except the supplied one. (Operation is not guaranteed with any other USB cables.) The USB function selection screen will appear. Creating a DVD-Video on a computer from a recorded disc 3 4 Using ImageMixer 3, you can create a DVDVideo disc from the images recorded on this unit.
LSQT1145.book 113 ページ ２００６年１２月２８日 木曜日 午前９時３４分 With a computer (VDR-D310/VDR-D230) 8 9 Select the scenes to be added to the DVD-Video and then click [DVD List]. Select the DVD menu, the disc size and the picture quality and then click [OK]. 11 Click the list created in step 9 in [Source] to display the contents of the list and then click [Write]. ≥ Check that the size of the data is not more than the capacity of the disc to be written to. 12 Proceed with the write setting and then click [Create].
LSQT1145.book 114 ページ ２００６年１２月２８日 木曜日 午前９時３４分 With a computer (VDR-D310/VDR-D230) ≥ If you disconnect the USB cable while the access lamp is on, it may damage the data. Using an SD card on a computer (Macintosh) Connection ¬ Connect this unit to the AC adaptor. 1 2 Insert an SD card with recorded images in the unit, then turn on the unit. Connect this unit and a computer. In this case, disconnect the USB cable (l 115). ≥ When a computer is accessing a card in this unit, the card access lamp lights.
LSQT1145.book 115 ページ ２００６年１２月２８日 木曜日 午前９時３４分 With a computer (VDR-D310/VDR-D230) To disconnect USB cable safely Drag the [NO_NAME] icon into the Trash and then disconnect the USB cable. ≥ If you disconnect the USB cable while the access lamp is on or while appears on the LCD monitor, it may damage the data.
LSQT1145.book 116 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Others Others Menus Still picture recording menus (VDR-D310/VDR-D230) Menu list Motion picture recording menus ∫ [BASIC] [SCENE MODE] (l 60) [GUIDE LINES] (l 58) [REC MODE] (l 47) [ASPECT] (l 59) [CLOCK SET] (l 42) ∫ [ADVANCED] [D.ZOOM] (l 53) [O.I.S.
LSQT1145.
LSQT1145.book 118 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Others When you turn on the power When this unit is recognized by the computer or the printer, etc. 2 Beeps When you pause recording When you turn off the power 2 Beeps for 4 times When an error occurs e.g. recording not starting. Check the sentence displayed on the screen.
LSQT1145.
LSQT1145.book 120 ページ ２００６年１２月２８日 Others 1 DPOF already set (to more than 1) Locked still pictures VDR-D310: 3.1M 2 1M 0.3M Number of recording pixels for still pictures 2048k1512 1920k1080 1280k960 640k480 VDR-D230: 0.3M 0.2 640k480 640k360 The picture size is not displayed for still pictures recorded with other products that have different picture sizes from the sizes shown above. ∫ Confirmatory indications –– (Time display) The built-in battery is low.
LSQT1145.book 121 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Others Messages CANNOT READ THIS DISC. PLEASE CHECK FOR SCRATCHES OR STAINS ON DISC. The disc is scratched or dirty. Eject the disc and clean it. (l 27) If there are scratches on the disc, use a new disc. NO DATA. There are no images recorded on the disc or card. THIS DISC IS INCOMPATIBLE. You inserted an incompatible disc (copy-protected discs, etc.). PLEASE CHECK THE DISC.
LSQT1145.book 122 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Others CARD LOCKED. The write protection switch on the SD card is set to LOCK. (l 26) CARD FULL. The SD card is full so no further data can be recorded. Delete unnecessary files (l 78) or insert a new SD card. PUSH THE RESET SWITCH. CHECK THE DISC AFTER PUSHING THE RESET SWITCH TO REPAIR THE DATA. An irregularity in the unit has been detected. Press the RESET button to restart the unit. (l 130) CHANGE TO MANUAL MODE. CANCEL MAGICPIX MODE.
LSQT1145.book 123 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Others Functions that cannot be used simultaneously Some functions in this unit are disabled or cannot be selected due to the unit’s specifications. The table below shows examples of functions restricted by various conditions.
LSQT1145.book 124 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Others Frequently asked questions What kind of discs can be used? DVD-RAM, DVD-RW, DVD-R and DVD-R DL can be used if they are 8 cm (3z) non-cartridge discs. (l 22) Can discs with a cartridge be used? They can be used if the cartridge is removed. Can double sided discs be used? They can be used. However you cannot record or play continuously from one side of the disc to the other. You will need to eject the disc and turn it over.
LSQT1145.book 125 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Others Is playback possible on a computer? (Windows) DVD-RAM, DVD-RW (VR format): Use the supplied software DVD-MovieAlbumSE. ≥ Before using DVD-RW (VR format) on a computer, be sure to finalize it on this unit. DVD-RW (Video format), DVD-R: Finalize the disc on this unit and then play it back with commercially available DVDVideo playback software. SD card: Use picture viewer software.
LSQT1145.book 126 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Others Is editing possible on a computer (Macintosh)? Use ImageMixer 3. ≥ Motion pictures that have been saved to the ImageMixer 3 library can be edited. ≥ Before using DVD-RW (VR format), DVD-RW (Video format) or DVD-R on a computer, finalize them on this unit. Is it possible to save data to a computer (Macintosh)? Discs: Use ImageMixer 3. ≥ Before using DVD-RW (VR format), DVD-RW (Video format) or DVD-R on a computer, finalize them on this unit.
LSQT1145.book 127 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Others Troubleshooting Problem Check points This unit cannot be turned on. ≥ Is the battery fully charged? # Charge the battery using the AC adaptor. (l 28) ≥ The battery protection circuit may have operated. Attach the battery to the AC adaptor for 5 to 10 seconds. If the unit still cannot be used, the battery is faulty. ≥ Is the LCD monitor opened or the viewfinder extended? This unit is turned off automatically.
LSQT1145.book 128 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Others Problem Check points The remote control does not function. ≥ Has the button-type battery of the remote control run out? # Replace it with a new button-type battery. (l 20) The DISC EJECT lever does not work. ≥ The disc cover will not open unless the unit is powered. # Connect a charged battery or AC adaptor. ≥ The DISC EJECT lever does not work when the unit is connected to the computer. (l 131, 132) The disc cannot be read.
LSQT1145.book 129 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Others Problem Check points Recorded still pictures are not clear. ≥ Are you trying to record small or finely detailed objects with [PICT.QUALITY] set at [ ]? # If you try to record small or finely detailed objects with [PICT.QUALITY] set at [ ], the images may break up into a mosaic-like pattern. Record with [PICT.QUALITY] set at [ ] instead. (l 52) Auto focus function does not work.
LSQT1145.book 130 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Others Problem The indication disappears. The screen is frozen. No operation can be performed. Check points ≥ Is this unit connected to a computer? # No operation can be performed on this unit when it is connected to a computer. ≥ Turn off the power to this unit. If the power cannot be turned off, press the RESET button, or remove the battery or AC adaptor and then reattach it. After that, turn on the power again.
LSQT1145.book 131 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Others Problem Check points When DVD-MovieAlbumSE is started, the [Mount Information] dialog box appears. ≥ You inserted an incompatible disc. # A disc other than a DVD-RAM or a DVD-RW (VR format) is loaded in the drive: DVD-MovieAlbumSE cannot be used for media other than DVD-RAM or DVD-RW (VR format). ≥ If there are multiple drives, a drive other than this unit may be selected.
LSQT1145.book 132 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Others With a computer (Macintosh) Problem Check points Even if connected by the USB cable, this unit is not recognized by the computer. ≥ The USB function selection screen does not appear if the USB cable is connected while the menu screen is displayed. # Close the menu screen before connecting the USB cable. ≥ Is the AC adaptor connected? # Use the AC adaptor when connecting the unit and a computer. ≥ Select another USB terminal on the computer.
LSQT1145.book 133 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Others Cautions for use About this unit ≥ The unit, disc and card become warm after long operation, but this is not a malfunction. Keep the DVD Video Camera as far away as possible from electromagnetic equipment (such as microwave ovens, TVs, video games etc.). ≥ If you use the DVD Video Camera on top of or near a TV, the pictures and sound on the DVD Video Camera may be disrupted by electromagnetic wave radiation.
LSQT1145.book 134 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Others ≥ This unit is not intended for industrial use. When you are not going to use the unit for an extended time ≥ When storing the unit in a cupboard or cabinet, it is recommended that you place a desiccant (silica gel) in with it. About the battery The battery used in this unit is a rechargeable lithium-ion battery. It is susceptible to humidity and temperature and the effect increases the more the temperature rises or falls.
LSQT1145.
LSQT1145.book 136 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Others About condensation When condensation forms on the unit, the lens will cloud up and the unit may not work properly. Make every effort to ensure that condensation does not form. If it does form, take the actions described below. Causes of condensation Condensation takes place when the ambient temperature or humidity is changed as follows. ≥ When this unit is brought inside from the cold (e.g. a ski slope) to a warm room.
LSQT1145.book 137 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Others source. For light outside the functional automatic white balance adjustment range, use the manual white balance adjustment mode. White balance The images recorded by the unit may become bluish or reddish under the influence of certain light sources. To avoid such phenomena, adjust the white balance. White balance adjustment determines the white color under different light sources.
LSQT1145.book 138 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Others Specifications DVD Video Camera Information for your safety Power source: Power consumption: DC 7.9 V/7.2 V Recording 7.0 W (VDR-D310)/6.
LSQT1145.book 139 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Others Minimum required illumination 12 lx (Low light mode: 1/60) [approx. 1 lx (VDR-D310)/approx. 2 lx (VDR-D230/VDR-D210) with the MagicPix function] Video output level 1.0 Vp-p, 75 ™ S Video output level (VDR-D310/VDR-D230) Y: 1.0 Vp-p, 75 ™ C: 0.286 Vp-p, 75 ™ Audio output level (Line) 316 mV, 600 ™ Mic input (VDR-D310) Mic sensitivity j50 dB (0 dB=1 V/Pa, 1 kHz) (‰ 3.
LSQT1145.book 140 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Others Picture size VDR-D310: 2048k1512, 1920k1080 (16:9), 1280k960, 640k480 VDR-D230: 640k480, 640k360 (16:9) AC adaptor Information for your safety Power source: Power consumption: DC output: AC 110 V to 240 V, 50/60 Hz 19 W DC 7.9 V, 1.4 A (Unit operation) DC 8.4 V, 0.65 A (Battery charging) Dimensions 61 mm (W) k 32 mm (H) k 91 mm (D) [2.40z (W) k 1.26z (H) k 3.58z (D)] Mass Approx. 110 g (0.24 lbs.
LSQT1145.book 141 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Others Number of recordable pictures on an SD card (VDR-D310/ VDR-D230) VDR-D310: Picture size 3.1M (2048k1512) 2 (1920k1080) Picture quality 8 MB 3 5 4 7 16 MB 8 13 10 17 32 MB 18 29 24 39 64 MB 39 61 51 81 128 MB 75 120 98 155 256 MB 160 250 210 330 512 MB 320 490 410 650 1 GB 630 990 820 1290 2 GB 1290 2010 1680 2630 4 GB 2520 3950 3290 5170 Picture size 1 M (1280k960) 0.
LSQT1145.book 142 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Others VDR-D230: Picture size 0.3M (640k480) 0.2 (640k360) Picture quality 8 MB 42 86 42 86 16 MB 97 195 97 195 32 MB 210 420 210 420 64 MB 430 870 430 870 128 MB 820 1650 820 1650 256 MB 1710 3430 1710 3430 512 MB 3400 6790 3400 6790 1 GB 6800 13600 6800 13600 2 GB 13830 27660 13830 27660 4 GB 27150 54310 27150 54310 ≥ The number of recordable pictures depends on whether [ subject being recorded.
LSQT1145.book 143 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Others Optional accessories Some optional accessories may not be available in some countries. Accessory No.
LSQT1145.book 144 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Others Accessory Order Form (For USA Customers) Please photocopy this form when placing an order. 1. Model # 2. Items Ordered Accessory # Description Price Each Quantity Total Price Subtotal Your State & Local Sales Tax Shipping & Handling 6.95 Total Enclosed 3. Method of payment (check one) Check of Money Order enclosed (NO C.O.D.
LSQT1145.book 145 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Others Request for Service Notice (USA Only) Please photocopy this form when making a request for service notice, in the unlikely event this product needs service. Request for Service Notice: •Please include your proof of purchase. (Failure to do so will delay your repair.) •To further speed your repair, please provide an explanation of what is wrong with the unit and any symptom it is exhibiting.
LSQT1145.book 146 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Others Limited Warranty (For USA Customers) PANASONIC CONSUMER ELECTRONICS COMPANY, DIVISION OF PANASONIC CORPORATION OF NORTH AMERICA One Panasonic Way, Secaucus, New Jersey 07094 PANASONIC PUERTO RICO, INC. Ave. 65 de Infantería, Km. 9.
LSQT1145.book 147 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Others Customer Services Directory Service in Canada: As per Service Center listed in Canadian warranty information l 148 Obtain Product Information and Operating Assistance; locate your nearest Dealer or Service Center; purchase Parts and Accessories; or make Customer Service and Literature requests by visiting our Web Site at: http://www.panasonic.com/consumersupport or, contact us via the web at: http://www.panasonic.
LSQT1145.book 148 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Others Warranty (For Canadian Customers) Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 PANASONIC PRODUCT – LIMITED WARRANTY Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship and agrees to remedy any such defect for a period as stated below from the date of original purchase.
LSQT1145.book 149 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Others Others Index ∫ A AC adaptor . . . . . . . . . . . . . . . . . . . .28, 32, 134 Aperture . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63 Auto focus . . . . . . . . . . . . . . . . . . . . . . . . . .137 Auto Ground-directional Standby (AGS) . . . .45 Automatic white balance . . . . . . . . . . . .61, 136 ∫ B Backlight compensation . . . . . . . . . . . . . . . . .55 Battery . . . . . . . . . . . . . . . . . . . . . . .
LSQT1145.book 150 ページ ２００６年１２月２８日 Others ∫ V Video format . . . . . . . . . . . . . . . . . . . . . . . . .24 Video light . . . . . . . . . . . . . . . . . . . . . . . . . . .54 Viewfinder . . . . . . . . . . . . . . . . . . . .20, 43, 135 Volume adjustment . . . . . . . . . . . . . . . . . . . .67 VR format . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 ∫ W White balance . . . . . . . . . . . . . . . . . . . .61, 137 Wide mode . . . . . . . . . . . . . . . . . . . . . . . . . . .
LSQT1145.book 151 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Others Others Spanish Quick Use Guide/ Guía española para el uso rápido ∫ Cómo encender/apagar la alimentación Mientras pulsa el botón A, ajuste el interruptor OFF/ON a ON/OFF. ∫ Carga de la batería 1 2 Conecte el cable eléctrico de CA al adaptador de CA y a la toma de la red de CA. Meta la batería en el respectivo soporte alineando la marca, luego encájela.
LSQT1145.book 152 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Others ∫ Cómo insertar/quitar una tarjeta SD (VDR-D310/VDR-D230) 1 Deslice la tapa de la ranura para tarjetas para abrirla. 2 Inserte/quite la tarjeta SD en/de la ranura de la tarjeta. 3 Cierre firmemente la tapa de la ranura de la tarjeta. 152 LSQT1145 Pulse el botón de inicio/parada de la grabación para empezar a grabar. 2 Pulse de nuevo el botón de inicio/parada de la grabación para detener brevemente la grabación.
LSQT1145.book 153 ページ ２００６年１２月２８日 木曜日 午前９時３４分 Others VDR-D310: 1 2 1 Seleccione la escena a ser reproducida. 2 Pulse el joystick. 3 Mueva el joystick para obrar. Pulse el botón de toma fotográfica [ ]a medias para enfocar al sujeto. (Solo en el modo de enfoque automático) Pulse completamente el botón de toma fotográfica [ ] para tomar la foto.
LSQT1145.book 154 ページ ２００６年１２月２８日 Others 2 Pulse el joystick. 3 Mueva el joystick para obrar. 1/;: La exposición de diapositivas inicia/se interrumpe. E: Reproduce la imagen anterior. D: Reproduce la imagen siguiente. ∫: Detiene la reproducción y muestra las miniaturas.
LSQT1145.
LSQT1145.book 156 ページ ２００７年２月１４日 水曜日 午前１１時５６分 Panasonic Consumer Electronics Company, Division of Panasonic Corporation of North America One Panasonic Way, Secaucus, NJ 07094 Panasonic Puerto Rico, Inc. Ave. 65 de Infantería, Km. 9.5, San Gabriel Industrial Park, Carolina, Puerto Rico 00985 Panasonic Canada Inc.
