User Guide
12
Getting Started
First-time Operation
3 Select language.
Select language and click [Next].
Follow the on-screen instructions.
4 Setup Windows.
Follow the on-screen instructions.
l
The computer restarts several times. Wait until the drive indicator
has turned off.
l
After the computer is turned on, the screen remains black or unchanged
for a while, but this is not a malfunction. Wait for a moment until the
Windows setup screen appears.
l
Setup of Windows will take approximately 5 minutes.
Go to the next step, conrming each message on the display.
l
If “Get online” is displayed, select “Skip this step”. You can set the Wire-
less Network after the setup of Windows is complete.
CAUTION
l
You can change the user name, password, image and security setting after
setup of Windows.
l
Remember your password. If you forget the password, you cannot use
Windows. Creating a password reset disk beforehand is recommended.
l
Do not use the following words for user name: CON, PRN, AUX, CLOCK$,
NUL, COM1 to COM9, LPT1 to LPT9, @, &, space. In particular, if you cre-
ate a user name (account name) that includes the “@” mark, a password
will be requested at the log-on screen, even if no password has been set.
If you try to log on without entering a password, “The user name or pass-
word is incorrect.” may be displayed and you will not be able to sign in (
è
page 24).
5 Set the time zone, and then set the date and time.
A
Flick from the middle of the Start screen to the top, and then touch
[Control Panel] under “Windows System”.
B
Touch [Clock, Language, and Region] - [Date and Time].
C
Touch [Change time zone…].
D
Select the time zone, then touch [OK].
E
Touch [Change date and time…], then set the date and time.
6 Create the recovery disc.
A recovery disc allows you to install OS and restore its factory default
condition, in case, for example, the recovery partition of the ash memory
is damaged. We recommend creating a recovery disc before you begin
using the computer.
Refer to
è
Reference Manual “Recovery Disc Creation Utility” about
creating the disc.
NOTE
l
PC Information Viewer
This computer periodically records the management information of the ash memory, etc. The maximum data vol-
ume for each record is 1024 bytes.
This information is only used for estimating the cause when the ash memory goes down by any possibility. They
are never sent to outside via network nor used for any other purpose except for the purpose described the above.
To disable the function, add the check mark for [Disable the automatic save function for management information
history] in [Hard Disk Status] of PC Information Viewer, and touch [OK].
(
è
Reference Manual “Checking the Computer’s Usage Status”)
In the default settings, a shortcut icon for Korean language is on the Desktop screen. You may delete the icon if not necessary.
l
Note that the computer consumes electricity even when the computer power is off. If the built-in battery is fully
charged, the battery will fully discharge in the following period of time:
Status Discharge period
When power is off Approx. 4 weeks
In sleep Approx. 3 days
In hibernation Approx. 4 weeks
DFQW5829ZA_UT-MB_8_OI_M.indb 12 2013/11/13 13:23:25