User Guide

17
Useful Information
10 Touch [Next].
If the option is displayed, select the setting and touch [Next].
●
[Reinstall Windows to the System Disk to factory default.]
Select this option when you want to install Windows to the factory default. After installation,
you can create a new partition. For how to create a new partition, refer to “To change the
partition structure” (è page 8).
●
[Reinstall to the OS related partitions.]
*1
Select this option when the flash memory has already been divided into several partitions.
For how to create a new partition, refer to “To change the partition structure” (è page 8).
You can keep the partition structure.
*1
This does not appear if Windows cannot be installed to the recovery partition and the area usable
by Windows.
11 At the confirmation message, touch [YES].
Installation starts according to the instructions on the screen. (It will take approximately
20 minutes.)
●
Do not interrupt installation, for example by turning off the computer or other operation.
Otherwise installation may become unavailable as Windows may not start up or the data
may be corrupted.
12 When Ending process screen is displayed, touch [OK] to turn off the
computer.
13 Perform the “First-time Operation” (è page 6).
NOTE
●
The date and time, and the time zone may not be correct. Be sure to set them correctly.
●
If the password is requested, enter the Supervisor Password.
14 Start the Setup Utility and change the settings as necessary.
15 Perform Windows Update.
16 <Only for model with TPM> Clear TPM (è page 16).