Operating instructions

112
Setting Your Machine
Fax Parameters
156 PRINT FORWARDED
DOCUMENT
1 Inc. Only Selecting whether a memory received fax or email to
be forwarded is always printed or only when
forwarding is incomplete.
2 Always
157 TRANSACTION
JOURNAL
1 Invalid Selecting whether the machine sends a transaction
journal to the pre-programmed email address.
2 Valid
158 PC REMOTE UPDATE 1 Invalid Selecting whether the machine will accept commands
from an email application, to:
(a) Program the Internet Parameters
(b) Program the Auto dialler
(c) Allow retrieval of the Journal
2 Valid
159 SUBJECT LINE ENTRY 1 Invalid Selecting whether the "Subject" line can be
programmed during each transmission.
2 Valid
160 DEFAULT DOMAIN 1 Invalid Selecting whether the machine accepts to insert the
Default Domain when entering Manual Number
dialling.
2 Valid
161 DNS SERVER 1 Invalid Selecting whether to use the DNS Server for the
Internet communication.
2 Valid
162 TIFF VIEWER URL 1 None Selecting whether to include the URL address in the
email message body.
2 English
3 English+
Japanese
163 ROUTING HEADER 1 Invalid Selecting whether to add the Header Print information
of the Routing Station on the top edge of each routed
pages.
2 Valid
164 IFAX XMT HEADER
(Email only)
1 Included Selecting whether to include the header when sending
a document to an addressee in the same Domain as
specified in the Default Domain parameter. (This is
useful when using the machine to scan documents
back to your PC)
Note : When sending to a Domain other than as specified in
the Default Domain parameter, the header will be
included regardless of the selection.
2 Not included
168 CC/BCC STATION 1 Invalid Selecting whether to allow the CC/BCC email
address(es) to be entered.
2 Valid
169 DHCP CLIENT 1 Invalid Select whether the machine would automatically
acquire the Network Parameters from the DHCP
Server. (Such as IP Address, Subnet Mask, Default
Gateway IP Address,etc.)
Note: If you change the setting of this parameter, the
machine will reboot automatically.
2 Valid
170 SMTP
AUTHENTICATION
(See Note 3)
1 Invalid If you transmit to the SMTP server, user name and
password are used for authentication. Selecting "Valid"
allows you to set up the user name and password.
2 Valid
171 POP BEFORE SMTP
(See Note 3)
1 Invalid If you transmit to the SMTP server, POP user name
and POP password are used for authentication.
2 Valid
172 DIRECT IFAX XMT 1 Invalid Selecting whether to be prompted during Phone Book
registration if the station you are programming is to
receive Internet Fax directly without going through a
Mail Server.
2 Valid
No. Parameter
Setting
Number
Setting Comments