— IMPORTANT INFORMATION When requesting information, supplies, or service always refs 1o the model and serial number of your machine, The mode and serial number’s piste (Main Name Plats} is (orated on the rear of the making, For your convenience, spacey s provided below to record the information you may node in the future. MODEL NO.
INTRODUCTION Tha UF-1268M i an amazingly compact facsimile machine in the low-end user tangs of the Panama family of Gi3 compatible, desktop facsimile machines. It features Auto speed dialing and other functions designed to make sending taxes easier, faster and more economical. The UF-128M is one of the models in the Panama ding of fax machines that is skipped with the TAM UF feature.
CONTENTS INTRODUCTION 1 3 GETTING TC KNOW YOUR FACSIMILE ~ External View . — Control Panel . 4 Sot Koy and Printouts 5 . INSTALLING YOUR FACSIMILE Caution B — Unpacking 7 — Installing tho Recording Paper Tray and Document Tray 8 — Installing Handset and Cradle ..o 9 — Connecting the Telephone Line 10 — Connecting the Power Supply Lead . 10 — Installing/Replacing Recording Paper 1 — Ratting the Dialing Method {(Tone or Pulse} 13 Final (installation Test .. Lightning Precautions ..
— How 1o Use the Mercury Line ~ Entering the MERCURY Button PIN Number — Entering Ora-TouchiAbhreviated Dial ling Numbers for Use on a Mercury Ling — To Transmit Via MERCURY — Redialing -~ What to Do When You Hear a Voice through ths Speaker MEMORY TRANSMISSION e Mamore Transmission o Sings Station — Multi station Transmission ..
Set Key and Printouts Set key Your machine uses the # kay to set various functions, as shown Ia the chart below, BEY j~1" | Ratting One-Touch Dialing Number {page 20) 2 ABBR —Sating Abbreviated Number {page 20) 88 USER PARAMETERS S e STANDBY {1 | setting bate & Time {page 15), Setting 1D Number {page 16}i Setting Polling Password (page 55); L] Setting LOGO (page Tone o1 3 Changing Fax h 38 Parameters {page 28} Printouts i addition to making capes, the COPY/LIST key can be used 1o printout vacuous Lists and
INSTALLING YOUR FACSIMILE Caution 1. Do allotting the making near heating or &ir conditioning units. £ Avoid exposure o direct sunlight, %, Install the making on a fiat surface, leave at least 10 ¢m of spas bentwood the machine and other abstracts. 4. Do not block the vacillation openings. 3. [ not place heavy objects or spill liquids on the machine.
Installing the Recording Paper Tray and Document Tray Recording Paper Tray Install the Recording Paper Tray by inserting i into the Tray Guide an the Recording Paper Cover until It locks into position.
Installing Handset and Cardie 1, Locate Handset Cable In slot on rear of radish and pull tight. Handset Handset Cable 2. Plug the Handset Cable into the socket marked “TEL” at the rear of the machine until It locks into place. FETE Regor View Set the Dial ling method switch in accordance with your telephone tine.
Connecting the Telephone Line Pius the Telephone Line Lead into the Siphons socket supplied by the telephone company. Power Switch ON Telephones Ling Land Po war Supply Lead Connecting the Power Supply Lead Plug the prows supply Pad into an ordinary AC outlet. Turn the power switch to the "ON" (I} poss son to turn on the power. The power lamp on the contra pants should light up. Your machines uses little power and you should esp It ON at all mes.
Installing/Replacing Recording Paper (1) Open the Front Cover by grasping both sides of the cover and pulling it up towards you, Open the Recording Paper Cover, Remove the ADF Protective Shea by pulling it towards the rear of 2 the machine, Open the Green Recording Clearance Guide by grasping both comers and pulling — it forward. It will lock into claps, Remove the Thermal Head Protective Short by carefully pulling — it towards the top of the machine.
(3} Insert approximately 5 em of recording paper downward between the Green Recording Clearance Guide and the Recording Paper Guide 8s shown, Align the paper with the Width Marla on the Green Recording Clearance Guide. Close the Green Recording Clearance Guido by pushing on both corners towards the rear of the machine.
Final Installation Test After installing your machine, it is advisable to make a copy or sand a fax by direct dialing to check it the machine is working properly. {For more details, seo page 28} {For more details, ses page 35.} m Epithelial SPACE E and enter a full number. ex [lE1EITIRIEE] {For more details, ses page 37.
SETTING UP YOUR MACHINE USER PARAMETERS Be fora smelting or changing any of the following User Parameters, make sure that the hands! is on the cradle {On-Hook). How to Set the Date and Time The built In timer is sad in journals fo inform you of when a transaction has taken place. i is also printed at the top of received documents ta tell you the time when a document was sent.
How to Set Your (D Number When you transmit a document, your 1D will appear on the other machine's display. When you receive a document, the sender’s ID will appear on your machine's display. We suggest you use your facsimile telephone number as your 1D, but you may use any number up 1o 20 digits long. To set the 1D number, SET Vila ! { and then -—2 Enter the 1D number using the keypad. You may 2 use [SPACE] t enter a space between the 1 212 numbers fo make It leaser to read.
Changing the 1D number, 212 92 Now you can set a new iD number. Move the cursor to the number you wish to sangs by pressing ({ORIGINAL or i and then {[RESOLUTION). if any unnecessary digits remain after entering the new number, ares them by entering a space with the [SPACE] key. Ex: Change the 10 bumper 3] [AENEAS [DANIELLE] (] mentored in page 1610 Crass ( [ORIGINAL] 9 times to move the cursor to [aft digit.
How to Set Your LOGO The LOGO helps (o identify you to someone who curatives your document. To set your LOGO (25 characters max.), enter a two-digit numeric code corresponding to the Character Cods Table {see Appendix ). SEY —- and then input @ | Enter oak letter, number andiron symbol of your Area LOGO using the key pad 10 ante each two-digit code, follows by the BET key Ex: for Panama ZIEGLER D] s8] 1{40E] 81(E10] LIFETIME L] 2lE]] « Symbol "o appears when you ante & TWA-digit code for sate character.
Ch angling the LOGO, : and then . \7 2 Now you can set a new LOGE, Move the cursor 1o the character you wish 1o change by pressing =) ([ORIGINAL) [RESOLUTION]). 00 1286 s Blinking Ex: Change the LOGO “Panama HQ'' enters in page 18 1o “Panasonic HO } 4 times 0 move the cursor 1o the &th character. Enter sonic HQ. [B1E1 (18114 ENEMY) [Alicia a2l e |[71RI£] any unnecessary characters remain after entering new LOGO, erase them by entering a space with the .
DIALING NUMBERS Entering Dial ling Numbers Abbreviated Dialing and One-Touch Dial ling are two fast ways of dialing.
START P o Enter receiving station mans {up to 16 Jetliners} using the Character Code Table (see Appendix . Ex: NEW YORK OFFICE (2103 0% 1 5l PACE] (2107 (1 [2) [0)L7 [PACE 2 41+ 115 MEIER £ 1TZICe 0 START < Repeat Step 2a/20 to 6 to record more numbers.
Changing an number, BET change an ABBR number; ABBR ™ Cross the two-sight code number you wish to change (01 89} (seo Step 2a/2b in page 20). oo [R01212 1112845_ Ex: [21(0] The last 12 digits will appear on the display. ] To change a One-Touch number; 20 Press One-Touch key {01 15). [0B]212 1112345_ Ex: One-Touch key 1 o The last 12 digits will appear on the display.
To sat the new telephone number, START Step 5 when you wish fo sangs the station name. * To return to standby, STOP Changing the station name, 5 Move the cursor to the character you wish to sangs by pressing [<1{ [ORIGINAL) or (> ( SOLUTION]). Ex: Change the station name “NEW YORK OFFICE” ante rad in page 21 to "NEW YORK HQ". Press [ > | 1} ¢ times to move the cursor 1o the 10th character, Enter HO.
Felling out the Station Directory Sheet Uss a pencil or a ball-point pen to fill in the station directory sheet with station names corresponding to the Ora-Tauch keys. The station directory shes is held in place in the machine by & transparent plastic cover shes. To removes the station directory sheet, {1) Push the transparent plastic cover sheet downward until it is bent enough 1o take out.
FAX PARAMETERS Your machine has a varsity of adjustable Fax Parameters. Tess Fax Parameters are preset for you in standard settings {(see Fax Parameter Table on page 26). Usually you do not need ta change the settings. Howard, you may wish to sangs some of them to slut your own circumstances. Once you taser the standard setting, & will be effective until you change it again.
SENDING DOCUMENTS LOADING DOCUMENTS Documents You Can Send in general, your machine will send any document from Ad-size 1o AG-size paper. Documents You Cannot Send You must never try to send documents that are; * Wat * Covered with wet ink or paste » Wrinkled, curled or folded * Too thin {e.g. onionskin, airmail paper, pages from same magazines, enc) + Too thick (e.g. card, act} *» Chemically processed {e.g. pressure-sensitive paper, careen-coatad papa, sic.
ADJUSTING THE MONITOR VOLUME Wuhan the fax machine is making a call, you hear the dial tone, the dialing signals, and the ringing or busy signal through the bully-In speaker. Slide the MONITOR VOLUME control on the right side of the unit to adjust the volume (o a comfortable level.
How to Load a Document First, make sure that your document is free of staples Fan down and paper clips, and is not torn, greased, or covered by any foreign objects. Place the document fee down on the Automatic Document Feeds (ADF} with the top adj going into the machine until it stops. Adjust the sliding document guides to ensure that the document Is centered on the ADF, i you are sending two or more pages, make sure that the bottom sheet enters fist.
TRANSMISSION SETTINGS You can temporarily sangs several settings, such as Resolution and Original (Contrast), before you send & document. Choose the most appropriate settings for the transmission store or after you set the document on tha ADF, You can also sangs these settings during transmission, but the change will not become effective until the machine starts transmitting the next page.
Original (Contrast) Your machine is preset to NORMAL contrast which is suitable for an ordinary document, 1 The standard setting of Contrast is indicated by on the display. 15-10-1992 15:00 i o} ROBOCALL LIGHT 2 When you send a document which has fight contrast, prods [ORIGINAL Jan select LIGHT. MADRIGAL ‘fi 15-10-1992 15:00 . p e HORMONAL LIGHT To return to NORMAL, press again, 3 | tater choosing the appropriate contrast sating, proceed to the next transmission setting or begin dialing. NO ¢ 1.
Error Correction Mode (ECM) ECM made provides error fare copy when your fax making is connected with a receiving fax machine which has ECM mode capability and your ECM mode is set to ON. Ths transmission time required in the ECM mode Is the same as the normal G3 mode in most cases. Your machine is preset io ECM = ON. If the telephones line is poor, then the transmission will take longer because the making will have to re transmit the lines that have errors.
Automatic Transmission Journal (XMT Journal) Transmission Journal (XMT Journal is a rapport which tells you whether the document is sent successfully or not. It Is printed out automatically after sate transmission when the Transmission Journey! Is set to ON. The Automatic Transmission Journal is, ha waver, press to OFF in your machine, {f you wish to turn ON the setting, folio the procedure below.
MAKING A COPY Be tore you send a document, you can make a copy of it on the machine so that you can see what it will probably look like to the person wha receives it Single Copley 1 Place the document face down ofi the ADF, 15-10-10292 15:00 Adjust right and left Document Guides. 2 When making a copy, the machine will automatically select Fine Resolution, unless you change the offsetting. If necessary, adjust [RESOLUTION] . [ORIGINAL] . anc [HALF TONE | (review pages 30 82).
Multiple Copley {Using the Memory) If you want to make two or more copes of a document, use the following procedures, 1 Place a document face down on the ADF. Act just left and right Document Guides, 2 necessary, adjust [RESOLUTION] | [ORIGINAL |, and [HALE TORE | review pages 30 325 3 MEMORY ;;2 4 %cope L&Y 5 | Mentor the numbs of copies. Ex: [6) (3] START & ¢ The making begins storing the document, then prints out copies.
DIALING TECHNIQUES This section explains four ways of sending documents. To review how 1o enter dialing numbers, see page 20. Direct Dial ling {On-Hook Dial ling) Direst Dial ling does not requite any advanced settings. You can use your making right away, it iy as easy as using a isle phone set. 1 Claps the document face down on the ADF. Adjust right and la#t Document Guides. 2 %&mudroom SPACE , the Tamp lights up. 3 | Dial the number from the keypad.
Your machine will dial the number. If the ins is fees, your documents will be sent and the ON LINE lamp lights up, 5551234 online e T (o amp N It the other static has and the 1D wilt appear on the display. D Rosella |" ON LINE 212 5551234 When transmission ends, the display shows the number of pages sent 05). = ON LINE 08 s ammmsnsmoseesmmmned | L 1 AMD OFF) If the line is busy, your machine will wait three minutes and then automatically redial the same number up 10 twice with three-minute intervals.
Dial ling from the Handset 1 ! Place the document face down on the ADF. Adjust right and left Document Guides. 15-10-1992 15:00 2 S Lift the handset. 3 | Dial the number from the keypad. ex: [E1E1ETI[E1E104) & | ¢t helpline is free and the other machine answers, you wail hear & long “neap" sound. TART ¢ ™ The ON LINE lamp will fight up, replaces the handset. if the other stallion has an I, it will appear on the display.
Dial ling Place the document face down on the ADF. 15-10-1952 1500 Adjust right and left Document Guides, To dist using ABBR. key, 1 BARD — A L«l and enter & two-digit number from the keypad. % % [03] 5551234 To dial using One-Touch key, W 5561234, ey Blinking The full number {e.g. 555 1234} will be dialed and shown on the display.
1f no contact is made, the ALARM lamp will light up and the display will show an information code 630 which means no contact was made). == ALARM lem” ON UNE 630 You can start another rand of automatic dialing by pressing [REDIALS (see page 46). 1. To radial & busy numbs, see gaps 46, 2.
The Mercury 2300 Residential Service The UF-128M is fully approved and compatible with the Mercury telephone network, Mercury's 2300 Services is a highly competitive telephone service for the residential and small business user, Most homes and businesses are now able fo access the Mercury network via there existing BT line. You san sack whether your STD code is in a Mercury access area on the list provided with the Mercury application form.
Entering the MERCURY Button PIN Number NOTE SEY CURRY # l MER " %_g]j and then _65 Enter a four-sight password, Ex: START ¢ i Enter MERCURY lino access code, then press Ex: {See Nos 1} Enter the Mercury PIN Cote {part 1 then part ).
Entering Dial ling Numbers for Use on a Mercury Line 1 One-Touch number; Press a Ora-Touch key. Ex: To assign dis fling number 79 588 12347 1o the One-Touch key 07, ABBE. number; Rags [ABBR] and enter two digits. Ex: To assign dialing number '8 588 1234" i ABBR 50 | mercury {see Mote} Enter the cost canter code (two or three digits), it necessary.
To Transmit Via MERCURY tram ADF 1 Place a document face down on the ADF, LAl SPACE. . the lamp lights up.
Redlining if the number you dialed is busy or there is no answer, the machine will wait three minutes and then automatically redial the number for you up to twice. i no contact is made after two redial attempts, the ALARM lamp will fight up and the display will show an information code 630 which means no contact was made), 630 ALARM You gan redial the ast number by simply pressing [REDIAL .
What to Do When You Hear a Voice through the Speaker i the other person’s fax machine is sst for manual reception, you will hear a vice through the speaker when you try to send documents. Lilt the handset. STOP Lfij (M Tell the either person to prepare for reception. When you hear a beep, START LINE lamp lights up and transmission begins. it the other station has an 1D, " and the 1D will appear on the display. D SPLAY | " ON LINE 5651234 Rep lase the handset.
MEMORY TRANSMISSION The memory function allows you to perform easily many different tasks. if you wish, you can store your documents into memory and then have the machine transmit the stars documents. After transmission is completed, the stored documents are erased automatically. The advantages of memory transmission are: 1. The same document can be transmitted to multiples stations, 2.
Memory Transmission to Single Station if you have a number of pages to send to a single station, you may bie able {o save time by using memory transmission. Instead of waiting for your transmission to be competed, you ¢an sire the document in your machine’s memory first and then have it transmitted to the station automatically. By doing this, if the June is busy, the machine will redial after without you being there and send the stored documents. ¥ Place a document face down on the ADF.
Multi station Transmission Using the built-in memory you can send a document sequentially to moral than one station at one time. This saves you the trouble of sending the same document o sate station one after another, 9 MEMORY B 1 Place a document face down on tha ADF, Adjust left and right Document Guides. Dial by pressing a One-Touch key, [ABBE and twe digits, [TIBIAL] and & full number. Ex: 15-10-1992 15:00 15-10-1992 15:00 —— [57] 5327890 .
Multi station Transmission Using the builtin mammary you can send a document sequentially to more than one station at one tire. This saves you the trouble of sending the mass document to sate station one after another, e 1 Place a document phage down on the ADF, 15:00 Adjust left and right Document Guides, —— ey ! MEMORY E=m 15-10-1982 15:00 £ Dial by passing a One-Touch key, [ABBR | and twee digits, [TEL/DIAL and a full number.
How to Set Fax Mode 1 Your making is prates 1o the FAX mode. The FAX/TELEPHONE damp is ON when your machine is set to this mods. TELEPHONER T it the FAX/TELEPHONE lamp is not ON, pass the | key, and confirm that the FAX/TELEPHONE lamp is ON. How to Set Telephone Mode 1 Cross the [EXIT HONE | ey and confirm that the RADIOTELEPHONE lamp goes oft. This indicates that the machine is now set for Voice Communication.
RECEIVING DOCUMENTS RECEPTION MODES When your machine receives documents, you can select one of threat dames of Reception as Shawn below. e TEL Man gal Fax acceptation Autocratic Fax Reception [ RECEPTION ~——TELFAX Prorogation {AUTOMATISM b e TAMMIE Rapscallion Four machine i preset to the Fax Mode. You can select another mods of Reception by pressing the (RADIOTELEPHONE key.
How to Set Fax Mode 1 Your making is preset 1o the FAX mode. The FAX/TELEPHONE damp Is ON wham your machine is sat to this mode. FAX TELEPHONE ' fi if the FAX/TELEPHONE lamp is not ON, press the [FAX/TELEPHONE |key, and confirm that the FAX/TELEPHONE lamp Is ON. How to Set Telephone Mode 1 Press the [TELEPHONE | koy and confirm that the RADIOTELEPHONE lamp goes off, This indicates that the machine is now sat for Aloe Communication, FAR TELEPHONE B 2 | when your telephone rings, % Lift the handset.
How to Set AUTOMATIC Mode TEL/FAX Reception You must set the TAM parameter to “Ens” (Not connected) before setting this mode [sea pages 25 26).
SUBSTITUTE RECEPTION (MEMORY RECEPTION) 1 the recording paper runs out in the middles of a page during reception, the machine will stop recording and automatically start receiving into s image data memory. Stored documents are automatically tamarind out from the top of the page that resulted in an incomplete recording when & new rot of recording paper is loads, 1 When the machine finishes the mortality receptor sen and there Is no recording paper, an information code appears an the display.
POLLING Polling means calling another station and requesting the transmission of measurements to you. The other ablation must know in advance that you will call, and must have a document set on tha ADF, You can also record a polling password, shared by the other station, to ensure security, How to Set the Polling Password — 1 [‘_E and then h} Blinking 2 | Enter a four digit password. 3 9878 £x L Blinking START 3 To store the password, 15-10-1892 15:00 fi 1. Polling wight not fa notion with afl fex machines.
How to Poll To poll & document from the other station, follow the procedure blow. 1 Make sure there is no document on the ADF. 9 | rums Tfie Ian lights up, which means that polling is set now. 30] Polling password appears when it has been previously set {see page 58}, START @ ™ 34 Polling password setting message appears if it has not been previously set. Enter & litigious temporary password. Ex: Enter and press .
USING THE MACHINE'’S TELEPHONE Making 2 Regular Cal You can use the handset on your machines to make regular calls. the handset and dial a full bumper just as if you were using an ordinary telephone. Leos Lift the handset, 2 Dial the telephone number on the Keypad. ex AIMEE L GEIGER Making Voice Contact after Sending/Receiving You may want to talk to the other person over the telephone after sending or receiving documents. To do 8o, perform Step 1 while the making is still sending or receiving.
PRINT OUT REPORTS AND LISTS o help you maintain records of the documents you send and receive, as well as lists of the Abbreviated Dial ling numbers and Fax Parameters you record, the UF-128M can print out the following reports and lists. 32 Transaction Journal The “Journal”’ is & record of the last 82 transactions (a transaction is performed gate time you send or velveteen a document), You can print it out manually in the following way, 1 Make sure no document is on the ADF.
Journal Printout Explanation {1} Printout date (2} Printout time 3} Communication number (4} Communication result + Day-Month-Year ; Hour : Minute 01 ~32 {Does not always begin with 01 when printed aut manually).
Dial ling Number List Befall or after you stern any new setting of Abbreviated dialing numbers, you can confirm the current tastings by printing out the Abbreviated Numbs list. Ta print out the list, START 2 %cone & st ¢ and then 1 Make sure ne document is on the ADF. The machine starts printing out the list, Sample Number List {1 (23 {3) KANRSREARRERERRRY _ONE. TOUCHPAPER, NOG . FHSHSRE2 S DATE 15.10.1992 #4WR TIME 15:00 #A#® ABROAD. STATION NAME {83 TELEPHONE 8O.
Fax Parameter List Before or after you inter the new setting of a Fax Parameter, you can confirm the current settings by printing out a Fax Parameter List. To print the list, cop/ f LIST and then START & ki 1 Make sure po document is on the ADF, TONE The making starts printing out the list, Sample Fax Parameter List REERERERRRFRRRURESIRRUNRY (P4 PARAMETER YAHWEH DATE 15.10.3082 KAYAK TIME 12134 Daresay PARAMETER NO.
Character Code Table To print out a pacy of the Character Code Table, which is used to record your LOGO, to, START 2 % The making starts printing out the list. Character Code Table 1 Ike sure no document is on the ADF, COPY/ List g h} and then [gg] KRAREXBURRHRAUNNRRRSINENR LOUR, CODE Ta Blew CiR, £ B (Cong) (303 (11} Set N o (cope) (230 {ehk} CHR. A X (cone} (38} (27) CHR. B Y (cone} (boy (41} CHR. " o {eon) {531 (5%} CHR. i & (cop R} (66} (67) CHR. o 1 (cope) {vo) (o1} CHR. {BE)] . {cope} {72} (13} CHR.
Memory Transmission Journal (COMM. JOURNAL) A Memory Transmission Journal is printed out automatically when you use Memory Transmission {Multi station Transmission}. Sample Memory Transmission Journal {1 2) RN E AR REFERRER (O, JODRNAL*REXEEF DATE 15-10-1952 AURA TIME 12:56 YENRENRRR 33 (B} 15) MOLE = TRANSMISSION START = 1510 12:50 END = 15-10 12:53 (10} ¥0, COM ABBR.
Power Allure Report If & power failure occurs, the document information stored in the machine's memory will be lost, In i this case a Power Failure Report will be printed out automatically after the Power is turned ON again. J The apart is not printed out if thees were no documents stored in the memory. Sample Power Allure Report 13 {2} FEPEIARFSAORSRIRURBERRNAS R _PUR FAILURE REP.
Installing Recording Paper Your facsimile machine uses a ROFL of special recording paper. You can easily install tha paper your T . self by following the steps blow seconding Floor cover 1. Open the Fa cording Paar Cover. £, Fathers is a used roll inside, ops the Green Record\@ ing Clearance Guide by grasping both corners and pulling it forward, it will lock into place. Removals the used roll and set the new rot in its place. The paper MUST fond from the bottom of the roll.
Clearing a Recording Paper Jam if the recording paper becomes jammed in the machine, you can remove the jammed recording paper by following tha steps below. Recording Paper Co var 1. Grasp both ends of the Front Cover and pull up toward you. Pan the Recording Paper Cover. Fran Cover 2. Open the Green Recording Clearance Guide by grasping both charmers and pulling it forward. |t will lock inter place. Pull up the jammed recording paper.
Clearing a Document Jam It a document becomes jammed in the machine, the display will show tha information code 031, To clear the Jam, 1. Grasp both ends of the Front Cover and pull up forward you. 2. Remove the jammed paps. 3. Close the Front Cover carefully, passing down until it locks.
Cleaning the Scanning Glass The Scanning Glass in your machine needs to be cleans periodically to ensues clear received and transmitted copy. if the receiving pant reports that the received documents were black, or contained black bands, try making & copy on your unit. if the copy has black hands, the Scanning Glass is probably direly or defective and must be cleans, 1. Grasp both sends of the Front Cover and pull up toward you. 2.
Replacing the Verification Stamp The Verification Stamp contain ink. When the stamp appears faded or hard to read, the stamp should b replaced. 1. Grasp both ends of the Front Cover and pull up toward you. 2. To replace the stamp with a new ons, re-install a new stamp to the holder (see Note), Verification Stamp 3, Astor tho stamp has been replaced, close the Front Cover. 1K h Uploads contact your focal Panasonic deader to purchase & raw stamp. The Verification Stamp Order No.
APPENDIX | A, TAM INTERFACE Your UF-128M is equipped with a unique feature callas TAM (Telephone Answering Aching) interface which enables it fo automatically switch a single telephones line either to FAX or TAM. You can connect most TAMS in the market to your machine and usa your existing telephones line very efficiently. For the operation of your TAM, please refer to the User's Guide of the TAM, installing Your TAM (1) Ra move the line lead of your TAM from the wall socket.
Setting AUTO RECEIVE Mode ) To change to the TAXIWAY made, press the FAX/TELEPHONE | key until the lamp flashes. FARFTELEDHOKE 3 Receiving Document with Your TAM Connected When your TAM curatives a call from the remote station, it sends an OGM (Outgoing Message) 1o the remote station. At the same time, your fax machine will continue to monitor for a fax signal. (1) When @ remote station sends a document; Your machine begins to receive a document after the TAM gives an OGM.
B. TROUBLESHOOTING WITH A TELEPHONE ANSWERING MACHINE (TAM) CONNECTED AUTO MODE (TAM/FAX AUTO SWITCHING) Symptom Titian 1 | Cannot utilize the remote turn-on feature of | This features is nat compatible, The fax making is the elephantine answering machine. The fax designed fo answer after 8 rings if the TAM dos making always answers after the 8th ring.
APPENDIX I CHARACTER CODE TABLE Note n To enter a space, input Cataract cads 72 or pass the [SPATE | key on the control pace. 76 CHA, CODE 0|11 112 181415 1817 118 |18 20 | 2120 CHR. CODE CHR. CODE CHR. CODE CHR, CODE 886 CHR, CORE CHR. CODE 108 | 09 CHR. CODE CHR, CODE CHR, . .
SPECIFICATIONS Compatibility Swanning method Document size Document thickness Effective scanning width Recording paper size Effective recording width Resolution Coding scheme Modem ADF capacity Image memory capacity Rawer supply Power consumption Dimensions Weight Operating environment CIT Group 8 Horizontal 1 Flat bed scanning with CCD Vertical : Intermittent scanning by stepper mayor, Normal 1 210 mm x 207 mm MAX. 1 288 mm x 1000 mm MiN, ;148 Single sheet: 0.0B mm o 016 mm Multi shew! : 0.
Notice for Connection to the Telecommunication Systems 1. a BABY Certificate Numbsr/Approval Number for the UF-128M: NS/1010/3/N/603210 b. BABY Certificate NumberfApproval Number for the MP100AB: $/1010/3/L/501771 APPROVED for connection to telecommunication systems specified In the instructions for use subject to the conditions set out in them, 2. This apparatus has been approved for the uss of the following facilities. » Sta rage of telephone numbers for retrieval by & predetermined coda.
10, 11, When the apparatus is used in other than FAX/TEL switching mode, the apparatus may only be used in the auto-answer mode on line listed in telephones directories issued by Public Network Operators when answer tons Is enabled. When the apparatus is used in FAX/TEL switching mode, the apparatus may only be corrected to lines not listed in telephone directories issued by Public Network Operators.
Facsimile Number Directory Name Number TEA KRR BNV RSN ARy NAe SRk LRI SRR KRR RPN KRR RN RA ARG SRR AR RN NPy ARy H KN ENI ARy B AR NP RSP E RPN A RSN R s NN PPN KRR area RKA SRR REFEREE RN NAR ats R AL rEe AR Vt ErErcTsacaratstenNNER T IEE AT INFERRED KRN RSP NN AR SENSORS E Ny A REASONER Taus KRR EKS R AR YR ARRAS RSN RIS NRC NN RPN ARV RSN SRR KRR RSN KRR RIS ETE ATy NSt N ne T tEE KEEPSAKE AR R R RSV ErerseaeaETReE IRt T NN A Rty
